• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.55-62
• /
• 2009

This paper proposes a decision method of fuzzy weights by utilizing degrees of contribution in order to classify insect footprint patterns having difficulties to classify species clearly. Insect footprints revealed delicately in the form of scattered spots since they are very small. Therefore it is not easy to define shape of footprints unlike other species, and there are lots of noises in the footprint patterns so that it is difficult to distinguish those from correct data. For these reasons, the extracted feature set has obvious feature values with some uncertain feature values, so we estimate weights according to degrees of contribution. If the one of feature values has distinct difference enough to decide a class among other classes, high weight is assigned to make classification. A calculated weight determines the membership values by fuzzy functions and objects are classified into the class having a superior value.atu present experimental resultseighrontribution. Iinsect footprints with noises by the proposed method.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.75.2-76
• /
• 2021

MESSIER is a science satellite project to observe the Low Surface Brightness (LSB) sky at UV and optical wavelengths. The wide-field, optical system of MESSIER is optimized minimizing optical aberrations through the use of a Linear Astigmatism Free - Three Mirror System (LAF-TMS) combined with freeform mirrors. One of the key factors in observations of the LSB is the shape and spatial variability of the Point Spread Function (PSF) produced by scatterings and diffraction effects within the optical system and beyond (baffle). To assess the various factors affecting the PSF in this design, we use PhoSim, the Photon simulator, which is a fast photon Monte Carlo code designed to include all these effects, and also atmospheric effects (for ground-based telescopes) and phenomena occurring inside of the sensor. PhoSim provides very realistic simulations results and is suitable for simulations of very weak signals. Before the application to the MESSIER optics system, PhoSim had not been validated for confocal off-axis reflective optics (LAF-TMS). As a verification study for the LAF-TMS design, we apply Phosim sequentially. First, we use a single parabolic mirror system and compare the PSF results of the central field with the results from Zemax, CODE V, and the theoretical Airy pattern. We then test a confocal off-axis Cassegrain system and check PhoSim through cross-validation with CODE V. At the same time, we describe the shapes of the freeform mirrors with XY and Zernike polynomials. Finally, we will analyze the LAF-TMS design for the MESSIER optical system.

• Korea Science and Art Forum
• /
• v.25
• /
• pp.379-388
• /
• 2016

There are some studies to get rid of slice patterns in coronal and sagittal images by FFT(Fast Fourier Transform) and Notch filter. However, the use of a notch filter is the ringing effect according to the rapid frequency change occurs in common. Therefore, this study will be to evaluate the shape and effect of the notch filter. In addition, it is proposed a new notch filter design. Results of the study are as follows. First, Emission-Notch filter was relatively naturally correcting the cutting pattern. Second, Emission-Notch filter to use as Ringing effect is reduced relatively. The next through these findings and further research progress more completely removed the Ringing effect, and expects to reproduce the data close to the actual human body information.

• Composites Research
• /
• v.36 no.3
• /
• pp.230-240
• /
• 2023

The deployable reflector antenna consists of 24 unit main reflectors, and is mounted on a launch vehicle in a folded state. This satellite reaches the operating orbit and the antenna of satellite is deployed, and performs a mission. The deployable reflector antenna has the advantage of reduce the storage volume of payload of launch vehicle, allowing large space structures to be mounted in the limited storage space of the launch vehicle. In this paper, structural analysis was performed on the main reflector constituting the deployable reflector antenna, and through this, the initial conceptual design was performed. Lightweight composite main reflector was designed by applying a carbon fiber composite and honeycomb core. The laminate pattern and shape were selected as design variables and a design that satisfies the operation conditions was derived. Then, the performance of the lightweight composite reflector antenna was analyzed by performing detailed structural analysis on modal analysis, quasi-static, thermal gradient, and dynamic behavior.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.2
• /
• pp.1-16
• /
• 2023

Due to the current seriousness of environmental pollution and the eco-friendly movement of the fashion industry, research on sustainable fashion design is being actively conducted. In this study, consumer perception of upcycling products, are divided into image, function, and meaning; and image is further divided into shape, color, and material. It was redefined as pattern, and image recognition was evaluated among men and women in their 20s and 30s, and men and women in their 40s and 50s used as subjects. First, factors that determine each image were extracted based on qualitative analysis of the precedent cases of upcycling bags, and quantitative analysis of the subjects was induced through a questionnaire. As a result of the analysis of evaluation items related to image association, the average frequency analysis of all subjects for each stimuli and the cognitive variance of the frequency analysis by generation by gender were found to be similar. However, awareness of some stimuli by generation showed a significant difference. Overall, in the three stimuli with high overall preference, common features, such as the basic box-shaped symmetrical structure, the monochromatic color of the Munsell system, solid and practical texture, and appropriate use of patterns were identified. In addition, it was confirmed that there was a difference with factors such as femininity, simplicity, touch, and splendor in the measurement factors. In conclusion, it is considered that the main significance of this study is that it excluded the recognition and meaning of upcycling products and explored the original design and image elements of products. Therefore, it is expected that this study will be used as a basic data for responding to the gender image of each generation as an alternative method of sustainable fashion design, and it will be an opportunity to expand the scope of the study to a detailed study beyond the biased topic.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.4
• /
• pp.366-377
• /
• 2010

We surveyed 553 middle school students living in Incheon using questionnaires to compare their food behaviors and snack intake patterns according to weight groups based on BMI. Mean BMI was 20.3 for males and 19.6 for females. The rate of underweight, normalweight and overweight students was 33.3, 51.7, and 15.0%, respectively. Compared to the other two groups, the overweight students perceived their body shape more accurately (p<0.01). Regarding the reasons for skipping dinner, the most frequent answer by the underweight students was 'because of snacks', while that of the overweight students was 'to lose weight' (p<0.01). The normalweight students were found to eat a Korean traditional type breakfast more frequently than the other weight groups (p<0.05). The overweight female group was more likely to overeathabitually, whereas the normalweight and underweight groups tended to overeat when they were under stress (p<0.05). As for the amount of the snack intake, the overweight male students replied that they eat quite a lot of snacks. As a conclusion, the problems found in the underweight group were unbalanced diet and the disturbance of regular meal patterns due to inappropriate snack intake. The problems shown in the overweight group were overeating due to habit or stress, fast eating speed and large amount of snack intake.

• Conservation Science in Museum
• /
• v.1
• /
• pp.37-42
• /
• 1999

Conservation treatment was done for the pottery-stand of Kaya period which was to be exhibited in celebration of the opening of Kimhae National Museum and for the jar of Chinese celadon which was to be exhibited in Korea National Museum's special exhibition "Formation of Ancient States". Through the examinations by naked eyes and under the microscope, condition before treatment, patterns and manufacturing techniques of the objects were observed. According to these examinations, conservation treatments, suitable for each object was finished. As the pottery-stand was damaged severely, the epoxy resin was pasted directly on the broken surface of the pottery to restore the original shape and pattern, color and feeling similar to original state were given to the restored area. Although same restoration material was applied on the celadon, it was not pasted directly on the broken surface of the celadon so that the restored area could be dismantled, and color and feeling were also treated somewhat differently.

• The Research Journal of the Costume Culture
• /
• v.31 no.1
• /
• pp.53-69
• /
• 2023

This study aims to analyze research trends regarding outdoor wear. For this purpose, the data-collection period was limited to January 2002-October 2022, and the collection consisted of titles of papers, academic names, abstracts, and publication years from the Research Information Sharing Service (RISS). Frequency analysis was conducted on 227 papers in total to check academic journals and annual trends, and LDA topic-modeling analysis was conducted using 20,964 tokens. Data pre-processing was performed prior to topic-modeling analysis; after that, topic-modeling analysis, core topic derivation, and visualization were performed using a Python algorithm. A total of eight topics were obtained from the comprehensive analysis: experiential marketing and lifestyle, property and evaluation of outdoor wear, design and patterns of outdoor wear, outdoor-wear purchase behavior, color, designs and materials of outdoor wear, promotional strategies for outdoor wear, purchase intention and satisfaction depending on the brand image of outdoor wear, differences in outdoor wear preferences by consumer group. The results of topic-modeling analysis revealed that the topic, which includes a study on the design and material of outdoor wear and the pattern of jackets related to the overall shape, was the highest at 30.9% of the total topics. The next highest topic was also the design and color of outdoor wear, indicating that design-related research was the main research topic in outdoor wear research. It is hoped that analyzing outdoor wear research will help comprehend the research conducted thus far and reveal future directions.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.23-23
• /
• 2023

The Hairy labrador tea (Ledum palustre L. var. diversipilosum Nakai) is a evergreen small shrub, belonging to the Ericaceae and mainly distributed along the alpine areas of Hamgyeong-do in North Korea. Through seed physiological research on North Korean plants, we intend to obtain basic data for the development of mass propagation methods and use them for vegetation restoration. The internal and external morphological characters of the seed were observed using scanning electron microscopy or stereoscopy, and full seeds were selected through X-ray test. Seeds were cultured on a growth condition at 15/6℃ and 25/15℃ to examine the germination response according to temperature, and the number of germinated individuals was examined every 24 hours to calculate germination percentage and mean germination time. Low-temperature treatment (4℃) and hormone treatment (GA3) were performed to investigate the effect of dormancy breaking, and analysis of variance (ANOVA) was performed on the experimental results using SAS 9.4. The seeds of the Hairy labrador tea were elliptical-narrow in shape, and the epidermal cell wall pattern was reticulated. The final germination rate (FGP) was the highest at 58.9% under the condition of low temperature treatment at 25/15℃. The average number of days to germination (MGT) was the highest at 25.1 days without treatment at 15/6℃, and the average of the last germination days was confirmed to be about 13 days. As a result of low temperature treatment, it was confirmed that the final germination rate (FGP) increased by 43.3%. The significance of the final germination rate (FGP) was verified according to the pretreatment at 25/15℃.

• Earthquakes and Structures
• /
• v.26 no.5
• /
• pp.383-400
• /
• 2024

For a conventionally repaired frame-supported-transfer-slab (FSTS) reinforced concrete (RC) structure, both the transfer slab and the beam-to-column and transfer slab-to-column joints remain vulnerable to secondary earthquakes. Aimed at improving the seismic performance of a damaged FSTS RC structure, an innovative retrofitting scheme is proposed, which adopts the sector lead rubber dampers (SLRDs) at joints after the damaged FSTS RC structure is repaired by conventional approaches. In this paper, a series of quasi-static cyclic tests was conducted on a large-scale retrofitted FSTS RC structure. The seismic performance was evaluated and the key test results, including deformation characteristics, damage pattern, hysteretic behaviour, bearing capacity and strains on key components, were reported in detail. The test results indicated that the SLRDs started to dissipate energy under the service level earthquake, and thus prevented damages on the beam-to-column and transfer slab-to-column joints during the secondary earthquakes and shifted the plastic hinges away from the beam ends. The retrofitting scheme of using SLRDs also achieved the seismic design concept of 'strong joint, weak component'. The FSTS RC structure retrofitted by the SLRDs could recover more than 85% bearing capacity of its undamaged counterpart. The hysteresis curves were featured by the inverse "S" shape, indicating good bearing capacity and hysteresis performance. The deformation capacity of the damaged FSTS RC structure retrofitted by the SLRDs met the corresponding codified requirements for the case of the maximum considered earthquake, as set out in the Chinese seismic design code. The stability of the FSTS RC structure retrofitted by the SLRDs, which was revealed by the developed stains of the RC frame and transfer slab, was improved compared with the undamaged FSTS RC structure.