• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.175-189
• /
• 1999

The purpose of this study was to established the characteristic radiographic features in salivary gland diseases by means of sialography and scintigraphy. Sialograms and scintigrams with diseases of salivary gland were examined. In this group were 5 salivary stones, 14 sialadenitis, 17 Sjogren's syndromes and 8 benign tumors. The obtained results were as follows; 1. In the configuration of the shape of main duct, those revealed that modified curvilinear and curvilinear types were predominant in Sjogren's syndromes but reverse sigmoid and angular types were in sialolithiasis and sialadenitis combined with sialodochitis. 2. In the configuration of the course of main duct, those revealed that smooth types were predominant in sialadenitis and irregular types were predominant in Sjogren's syndromes and benign tumors and irregular types were seen in all salivary stones and sialadenitis combined with sialodochitis, 3. In the type of intraglandular pattern, those revealed that destructive changes of salivary duct system and parenchyma were severe in sialadenitis and salivary stones and predominantly severe in Sjogren's syndromes. 4. The function of salivary gland was decreased severely in Sjogren's syndrome. and also decrease in salivary stone and sialadenitis. In benign tumor, the uptake of radioisotope was not seen in lesion and the function of salivary gland decreased in its remaining normal parenchyma.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.10
• /
• pp.458-463
• /
• 2003

In order to develope piezoelectric transformer for the ballast of fluorescent lamp, a new shape and electrode pattern of piezoelectric transformer has been investigated in this work. The composition of piezoelectric ceramics was 0.95Pb(Zr$_{0.51}$Ti$_{0.49}$)O$_3$+0.03Pb(Mn$_{1}$3/Nb$_{2}$3/)O$_3$+0.02Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$. The sample prepared by this composition system showed the characteristics which has about 1200 of relative dielecric constant, 1100 of the mechanical quality factor, 0.53 of the electromechanical coupling coefficient, 320 pC/N of the piezoelectric constant d$_{33}$, 0.3 % of the dissipation factor. Diameter and thickness of disk-type piezoelectric transformer was 45 mm and 4 mm, respectively. The driving and generating electrode with their gap of 1mm were fabricated on the top surface. But the common electrode was fabricated on the whole bottom surface. The electrode surface ratio of driving and generating part on the top surface ranges from 1.4:1 to 3:1. We investigated the electrical characteristics with the variation of the electrode surface ratio of driving and generating part in the range of load resistance of 100 $\Omega$～70 k$\Omega$. The set-up voltage ratio of this piezoelectric transformer increases with increasing both the electrode surface of driving part and the load resistance. The set-up voltage ratio at no load resistance was more than 60 times. On the other hand, the efficiency decreases with increasing the electrode surface of driving part. In the case of the electrode surface of both 1.4:1 and 2:1, maximum efficiency showed above 97 % at load resistance of 2 k$\Omega$. However, in the case of the electrode surface of 3:1, maximum efficiency showed about 94 % at load resistance of 3 k$\Omega$.>.>.>.

• Geomechanics and Engineering
• /
• v.14 no.4
• /
• pp.337-344
• /
• 2018

The study of the mining effect influenced by a normal fault has great significance concerning the prediction and prevention of fault rock burst. According to the occurrence condition of a normal fault, the stress evolution of the working face and fault plane, the movement characteristics of overlying strata, and the law of fault slipping when the working face advances from footwall to hanging wall are studied utilizing UDEC numerical simulation. Then the inducing-mechanism of fault rock burst is revealed. Results show that in pre-mining, the in situ stress distribution of two fault walls in the fault-affected zone is notably different. When the working face mines in the footwall, the abutment stress distributes in a "double peak" pattern. The ratio of shear stress to normal stress and the fault slipping have the obvious spatial and temporal characteristics because they vary gradually from the higher layer to the lower one orderly. The variation of roof subsidence is in S-shape which includes slow deformation, violent slipping, deformation induced by the hanging wall strata rotation, and movement stability. The simulation results are verified via several engineering cases of fault rock burst. Moreover, it can provide a reference for prevention and control of rock burst in a fault-affected zone under similar conditions.

• Journal of the Korean Society of Costume
• /
• v.56 no.9 s.109
• /
• pp.83-97
• /
• 2006

This Study is a thesis presenting handicrafty and decorative textile design as well as sensual fashion design through the works of Gustav Klimt. The result is as below; The formative qualities in the works of Klimt could be featured as decorativeness, sensuality and symbolism. First, the decorative inclination is prominent in the portrait and the effect is maximized with the golden mosaic shape expressed on the dress and the background influenced by the Byzantine. Second, the sensuality could be recognized directly from the women's pose or facial expression in the works of Klimt, otherwise appeared on the refined expression showed on the portraits of noble lady Third, to surpass the reality, Klimt preferred the symbolic expression, which can be shown on the patterns in the works addressing the themes such as the legends and myths, or figures of men and women expressed with the image of an abstract features of membrum. The development of the textile design is as fellowed. First, it analyzes and reconstitutes the formativeness and the element of design in the works of Klimt by the flow of the form factor. Second. it makes a pattern of a single nature through perception, analysis, description and drawing and expresses with realization of the characteristics of Klimt. Focusing on the handicrafts and decorativeness out of the latest trends and making the most use of the sensuality, the designed textiles were completed by the handicrafty techniques, used in the fashion design and completed as the design of sensual images. The textile development aims at minimizing the limit of design that can be caused by the absence of silhouette and detail, expanding the range of its creativity of fashion designs and creating fashion design high value-added.

• Steel and Composite Structures
• /
• v.19 no.6
• /
• pp.1561-1580
• /
• 2015

No significant improvement has been observed on the seismic performance of the ordinary steel reinforced concrete (SRC) columns compared with the reinforced concrete (RC) columns mainly because I, H or core cross-shaped steel cannot provide sufficient confinement for core concrete. Two improved SRC columns by constructing with new-type section steel were put forward on this background: a cross-shaped steel whose flanges are in contact with concrete cover by extending the geometry of webs, and a rotated cross-shaped steel whose webs coincide with diagonal line of the column's section. The advantages of new-type SRC columns have been proved theoretically and experimentally, while construction measures and seismic behavior remain unclear when the new-type columns are joined onto SRC beams. Seismic behavior of SRC joints with new-type section steel were experimentally investigated by testing 5 specimens subjected to low reversed cyclic loading, mainly including the failure patterns, hysteretic loops, skeleton curves, energy dissipation capacity, strength and stiffness degradation and ductility. Effects of steel shape, load angel and construction measures on seismic behavior of joints were also analyzed. The test results indicate that the new-type joints display shear failure pattern under seismic loading, and steel and concrete of core region could bear larger load and tend to be stable although the specimens are close to failure. The hysteretic curves of new-type joints are plumper whose equivalent viscous damping coefficients and ductility factors are over 0.38 and 3.2 respectively, and this illustrates the energy dissipation capacity and deformation ability of new-type SRC joints are better than that of ordinary ones with shear failure. Bearing capacity and ductility of new-type joints are superior when the diagonal cross-shaped steel is contained and beams are orthogonal to columns, and the two construction measures proposed have little effect on the seismic behavior of joints.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.94-103
• /
• 1993

This study deals with an investigation on the tip vortex generated by an elliptic wing with section shapes of NACA 0020. The flow structure on the wing surface is investigated by using tufts test as well as observing the cavitation pattern. The surface pressure on a foil surface is measured to complement the visualized flow field. Results show that a strong spanwise pressure gradient is a definite contributor on the formation of tip vorex, and the fluids from both sides contribute to the evolutionary process of tip vortex. On the other hand, a series of experiments are conducted to investigate the detailed structure of tip-vortex at various angles of attack. The tip-vortex formation and development are observed by producing a cavitation, and then by a laser sheet technique in conduction with a dye injection method. The shape of tip-vortex and the distance between a vortex core and the trailing vortex sheet are found to vary with the angle of attack. Overall features of tip flow are evaluated to complement the vortex model based on inviscid theory.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.3
• /
• pp.429-437
• /
• 2011

This study evaluated on the purchasing patterns for bakery products and the effects of brand image on consumers' purchasing power while living in the Seoul area. The questionnaires developed for this study were distributed to 400 males and females aged 20 and older. A total of 385 questionnaires were used for analysis (96.0%) and the statistical analysis, descriptive analysis, and $x^2$-test were completed using SPSS (version 14.0) software. When purchasing bakery products, 'taste' (59.7%) was most important followed by 'shape and size' (13.2%), 'ingredients' (11.7%), 'price' (7.5%), 'expiration date' (5.2%). 'origin of ingredients' (2.1%), and 'packaging' (0.5%). Subject showed significant differences in their purchase of bakery products based on characteristics including 'age' (p<0.05), 'occupation' (p<0.01), 'type of family' (p<0.01), and 'income' (p<0.1) The most influential factor in purchasing bakery products was 'material' (score=3.73), followed by 'name value' (score=3.56). Brand image of bakery had an effect on bakery products as 'present' (score=3.83), 'sanitation' (score=3.58). And, the most high respondent in basis of deciding brand image consumer's was 'clean and nice interior'(53.1%), followed by 'high quality ingredients and packaging'(23.7%).

• The Journal of the Petrological Society of Korea
• /
• v.27 no.1
• /
• pp.17-24
• /
• 2018

The volcanic history of the volcanic ash cloud movement recorded in the annals of the Choson dynasty in 1654, presumably due to explosive eruptions from Mt. Baekdu volcano. On October 21, 1654, volcanic ash and volcanic gas erupted from Mt. Baekdu could be interpreted as volcanic ash, which was transported to low altitude by winds of north and northeast winds and descended to the south of the peninsula along with volcanic ash clouds. The affected area appeared northward in the southern boundary of Hamgyeongdo, which is estimated to have moved the volcanic ash from Mt. Baekdu to the south of the Korean peninsula. Clouds of volcanic ash have passed through Jeokseong and Jangdan area, Gyeonggido about 500 km away from Mt. Baekdu. This is interpreted as a result of the formation of a volcanic ash cloud along the ground in a curved shape due to the influence of the prevailing wind, which was formed by Plinian-type eruption at Mt. Baekdu. This is reproduced by numerical simulations on the similar weather pattern model.

• Design & Manufacturing
• /
• v.14 no.3
• /
• pp.44-49
• /
• 2020

One of display trends today is development of high pixel density. To get high PPI, a small size of pixel must be developed. RGB pixel is arranged by evaporation process which determines pixel size. Normally, a fine metal mask (FMM; Invar alloy) has been used for evaporation process and it has advantages such as good strength, and low thermal expansion coefficient at low temperature. A FMM has been manufactured by chemical etching which has limitation to controlling the pattern shape and size. One of alternative method for patterning FMM is laser micromachining. Femtosecond laser is normally considered to improve those disadvantages for laser micromachining process due to such short pulse duration. In this paper, a femtosecond laser drilling for thickness of 16 ㎛ FMM is examined. Additionally, we introduce experimental results for controlling taper angle of hole by vibration module adapted in laser system. We used Ti:Sapphire based femtosecond laser with attenuating optics, co-axial illumination, vision system, 3-axis linear stage and vibration module. By controlling vibration amplitude, entrance and exit diameters are controllable. Using vibrating objective lens, we can control taper angle when femtosecond laser hole drilling by moving focusing point. The larger amplitude of vibration we control, the smaller taper angle will be carried out.

• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.61-70
• /
• 1996

In cementless total hip arthroplasty(THA), an initial stability of the femoral component is mandatory to achieve bony inyowth and secondary long term fixation. Primary stability of the femoral component can be obtained by minimizing the magnitude of relative micromotions at bone stem interface. An accurate evaluation of interf'ace micromotion and stress/strain fields in the bone-implant system may be relevant for better understanding of clinical situations and improving THA design. Recently finite element method(FEM) was introduced in'orthopaedic research field due to its unique capacity to evaluate stress in structure of complex shape, loading and material behavior. The authors developed the 3-dimensional finite element model of proximal femur with $Multilock^{TM}$ stem of 1179 blick elements to analyse the micromotions and mechanical behaviors at the bone-stem inteface in early post-operative period for the load simulating single leg stance. The results indicates that the values of relative motion for this well fit stem were $150{\mu}m$ in maximum $82{\mu}m$ in minimum and the largest relative motion was developed in medial region of Proximal femur and in anterior-posterior direction. The motion in the proximal bone was much greater than in the distal bone and the stress pattern showed high stress concentration on the cortex near the tip of the stem. These findings indicate that the loading on the hip joint in the early postoperative situation before achieving bony ingrowth could produce large micromotion of $150{\mu}m$ and clinicaly non-cemented THA patient should not be allowed weight bearing strictly early in the postoperative period.