• Composites Research
• /
• v.28 no.1
• /
• pp.1-5
• /
• 2015

In this paper the influence of fiber orientation of basalt and carbon inter-ply fabrics on the flexural properties of hybrid composite laminates was experimentally investigated. Four types of basalt/carbon/epoxy inter-ply hybrid composite laminates with varying angle ply orientation of reinforced basalt fiber and fixed orientation of carbon fiber were fabricated using hand lay-up technique. Three point bending test was performed according to ASTM 7264. The fracture surface analysis was carried out by scanning electron microscope (SEM). The results obtained from the four laminates were compared. Lay-up pattern of $[0B/+30B/-30B/0C]_S$ exhibits the best properties in terms of flexural strength and flexural modulus. Scanning electron microscopy results on the fracture surface showed that the interfacial de-bonding between the fibers and epoxy resin is a dominant fracture mode for all fiber lay-up schemes.

• Transactions of Materials Processing
• /
• v.18 no.7
• /
• pp.519-530
• /
• 2009

The study is concerned with shape correction of stamped product using the laser irradiation. As a fundamental study, laser irradiation process has been analyzed through the thermo-mechanical FE analysis. For the purpose of validation, laser scanning experiment has been carried out also. Since the deformation mechanism involved in the laser scanning is extremely complicated due to the highly temperature dependent material properties, the determination of laser scanning pattern is not easy for the application of real stamped parts. A simplified method for the application of springback correction has been suggested with the thermo-mechanical FE analysis.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.120-130
• /
• 1998

In this study, we implemented a scanning capacitance decimicron micorscope(SCdM) which scans a surface of the object mechanically in two or two point five dimensions with a stylus of size 0.2.mu.m. X-Y stage and stylus driving method are used as the scanning method, and VHD disk plate and IC chip are used as the object. Experimenal resutl of these object show that SCdM obtain 0.1.mu.m resolution power which exceeds that of optical microscope, and this microscope will be used as a powerful tool for inspecting ULSI pattern or biological data as a decimicron mcirocope which zoom a function of optical microscope and guide STM. The experimental system is composed of a VHD video disk method which captures the capacitance changes of the video disk suface and converts it into video signal.

• Korean Journal of Optics and Photonics
• /
• v.25 no.3
• /
• pp.142-145
• /
• 2014

In this paper we record the complex hologram of a real object with optical scanning holography (OSH). We reconstruct the complex hologram using a numerical process, and then we evaluate the degree of contamination by speckle noise between the reconstruction of the complex hologram and the image captured by a CCD camera. We use the contrast of the speckle pattern for quantitative evaluation.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.392-397
• /
• 2001

This paper concerns on modal analysis of mechanical structures by using a continuous scanning laser Doppler vibrometer. In modal analysis the Hilbert transform based approach is superior to the Fourier transform based approach because of its fine accuracy and its flexible experimental settings. In this paper the Hilbert transform based approach is extended to measure area mode shape data of a structure by simply modifying the scanning pattern ranging the entire surface of the structure. The effectiveness of this proposed method is illustrated along with results of numerical simulation for a rectangular plate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.436-437
• /
• 2005

3-dimension object's feature measurement is used several industrial field to produce for examination of demanded high quality products by using optical measurement method. 3-dimension object's feature measurement is separated surface scanning and surface non-scanning. In this research, we illuminated interfero-pattern to object, it was constructed with Michelson interferometer by using laser is one of surface non-scanning method. And we extracted phase-map, it is one of featural measurement analysis of 3-dimensional object by using a phase shifting theory.

• Laser Solutions
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2008

We proposed new light guide panel (LGP) fabrication method exploiting laser-processed inner scatterers and surface pattern. The proposed method has achieved LGP performance improvement in both brightness and uniformity. The inner scatterers and surface pattern of grid type were fabricated with a 2nd harmonic Nd:YAG pulse laser engraving system and a $CO_2$ laser scanning system, respectively. In the implementation of LGP, inner scatterers was arranged in accordance with linear or curved pattern with changing density and surface pattern was engraved on the surface of an inner-scatterers embedded LGP. The increase of scatterers' density and the use of surface patterns in both linear and curved pattern provided high luminance and uniformity enhancement. While thecurved pattern incorporated with increased scatterers' density and surface patterns yielded brightness improvement with preserving good uniformity, the linear pattern showed highly localized brightness near the light entrance of the LGP. We can also observe that the uniformity was mainly determined by pattern of inner scatterers, and the brightness was improved by the higher density and the utilization of surface patterns. From the results, the use of laser-processed inner and surface patterns can be a potential alternative for efficient and simple LGP fabrication method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.204-214
• /
• 2019

A CAD program has recently been introduced that can be directly developed into a three-dimensional human body shape and made into a pattern. It is possible to fabricate a bra that reflects the volume and surface area of the breast; however, it still needs to be verified. This study investigates the average size and shape of 20 big-breasted women and designs a brassiere pattern for women with large breasts using a 3D Flattening function of OptiTex PDS v15.6. In addition, the study verifies the reliability of the proposed method compared to a conventional brassiere pattern. The study results are as follows. First, the three dimensional measurement values were smaller than the direct measurement dimensions when the three dimension measurement dimensions of the subjects were compared with the direct measurement dimensions, the replica measurement dimensions and the three dimensional measurement dimensions. Second, the 3D flattening pattern reflects the actual shape, length, and area of the actual breast when comparing a brassiere pattern using a 3D shape and pattern reflecting the direct measurement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1858-1860
• /
• 2016

In this paper, a modified YARA software architecture that can perform pattern matching for multi-rule files is proposed. Based on a improved scanning thread algorithm, the new design reduces memory loading time of rule files for pattern matching. Therefore, the proposed architecture can reduce operation time for pattern matching while it requires an increased memory in proportion to the number of rule files.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.332-337
• /
• 2012

The primary objective of this work is to find the properties of sustained release dissolution pattern depending on solubility of drugs, so venlafaxine HCl and carbamazepine tablets were made by using polymer wich various particle size. Hydroxy propyl methyl cellulose (HPMC) has been utilized in this study as an excipient that is one of the most widely used polymers for an oral sustained release formulation, and drug release pattern was strongly influenced by swelling rate depending on particle size of HPMC. Scanning electron microscope (SEM) was employed to investigate the surface of tablets with various HPMC particle size, and differential scanning calorimeter (DSC) was employed to investigate the crystallization of drugs in tablets. The release model equation was applied to analyze the main mechanism of drug release pattern. The results demonstrate that drug release pattern is controlled by the drug solubility and HPMC particle size.