• Korean Journal of Human Ecology
• /
• v.16 no.3
• /
• pp.577-585
• /
• 2007

This research aimed for 20 latter man whose body shape of torso alters remarkably to develop nipper pattern of running type considered characteristic of body shape of 20 latter man to keep rather balanced body shape against middle age when body shape changes extremely. 1. running type nipper pattern design. Pattern of running, lining and nipper were designed by flattening surface shell. A basis line of running pattern is completed by applying reduction ratio after 3 times of modification & complement based on surface shell. Nipper pattern is designed with design line set by a plaster cast based on running pattern line. Lining pattern is designed with lining design line set by a plaster cast based on running type outside material and nipper pattern. 2. Functional evaluation of research and commercial nipper. Functional inspection through dress test was applied 5point evaluation method and the result of functional inspection on the sight of a wearer is that research nipper(running reduction ratio 15%, nipper reduction ratio 18%) averaged more 4.8point but commercial nipper averaged less 1.8point in the aspect of 20 items such as wear sensibility, motional function and external appearance aesthetic. Research running type nipper scored high in order of motional function, looks of side, back, front and whole and wear sensibility. Functional inspection in the point of view of an observer is that research nipper(running reduction ratio 15%, nipper reduction ratio 18%) averaged over 4.8point and commercial nipper averaged under 1.9point in 17 items of external appearance beauty. Research running type nipper marked high in order of looks of back, whole, front and side.

• The Research Journal of the Costume Culture
• /
• v.9 no.4
• /
• pp.652-663
• /
• 2001

The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to the body types to improve the aesthetics and wearing satisfaction. Therefore, fundamental data for aesthetic and functional patternmaking of the stretch skirt can be suggested. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+0cm and W - lcm for thin body type were suggested for the best fit. For the ease on hip, H+0cm and H-2cm for thin body type were suggested for the best fit. 2. The results from wearing satisfaction test were as fDllows. W+Ocm, H+Ocm for thin body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows: pattern reduction ratio 3.3 ∼ 5.0% of waist, 4.8 ∼7.2% of hip for thin body type were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows: For thin body type, W+0cm, W - lcm for waist and H+0cm, H-2cm for hip were appropriate for stretch skirt pattern. Therefore, different ease has to be applied to stretch skirt pattern according to the body parts, to make the skirt looks good, is appropriate for thin body type, and is satisfied with appearance and wearing satisfaction test.

• The Research Journal of the Costume Culture
• /
• v.10 no.4
• /
• pp.392-403
• /
• 2002

The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to fat body type to improve the aesthetics and wearing satisfaction. For this study, three college students were selected according to the fat body types; According to fat body types, 15 experimental skirt which were different each other in terms of the amount of ease on wait and hip, were made for the appearance test and wearing satisfaction test. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+2cm and W+0cm for fat body type were suggested for the best fit. For the ease on hip, H+2cm and H+0cm for fat body type were suggested for the best fit. 2. The results from wearing satisfaction test were as follows. W+2cm, H+2cm for fat body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows. pattern reduction ratio 0∼2.4% of waist, 1.9∼3.8% of hip for fat body type, were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows. For fat body type, W+2cm, W+0cm for waist and H+2cm, H+0cm for hip were appropriate for stretch skirt pattern. Therefore, different ease has to be applied to stretch skirt pattern according to the body parts, to make the skirt looks good, is appropriate for fat body type, and is satisfied with appearance and wearing satisfaction test.

• The Research Journal of the Costume Culture
• /
• v.9 no.3
• /
• pp.433-446
• /
• 2001

Recently, according to changes in fashion trends, the importance of stretch fabric stands out. A lot of studies on non-stretch woven fabrics have been made, but few studies on stretch fabrics has been made yet. Especially, the study on ease for the patterns, according to body types, of stretch has not been made at all. The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to standard body type to improve the aesthetics and wearing satisfaction. Therefore, fundamental data for aesthetic and functional patternmaking of the stretch skirt can be suggested. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+0㎝ and W-1㎝ for standard body type were suggested for the best fit. For the ease on hip, H+2㎝ and H+0㎝ for standard body type were suggested for the best wearing best fit. 2. The results from wearing satisfaction test were as follows. W+0㎝, H+2㎝ for standard body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows: pattern reduction ratio 3.0∼4.6% of waist, 2.1∼4.3% of hip for standard body type were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows: For standard body type, W+0㎝, W-1㎝ for waist and H+2㎝, H+0㎝ for hip were appropriate for stretch skirt pattern.

• Smart Structures and Systems
• /
• v.17 no.5
• /
• pp.725-742
• /
• 2016

This paper is focused on stiffness ratio effect and a new method to specify the best pattern of piezoelectric patches placement around a hole in a plate under tension to reduce the stress concentration factor. To investigate the stiffness ratio effect, some different values greater and less than unity are considered. Then a python code is developed by using particle swarm optimization algorithm to specify the best locations of piezoelectric actuators around the hole for each stiffness ratio. The results show that, there is a line called "reference line" for each plate with a hole under tension, which can guide the location of actuator patches in plate to have the maximum stress concentration reduction. The reference line also specifies that actuators should be located horizontally or vertically. This reference line is located at an angle of about 65 degrees from the stress line in plate. Finally two experimental tests for two different locations of the patches with various voltages are carried out for validation of the results.

• Transactions of Materials Processing
• /
• v.18 no.8
• /
• pp.616-624
• /
• 2009

In this work we demonstrate the hot-embossing process under different forming conditions such as forming temperature, load, and holding time in pressing, in order to determine the suitable conditions required for linear patterning on polymer plates (PC). Results showed that the replicated pattern depth increased in proportion to an increase in the forming temperature, load, and time. The reduction of the workpiece thickness increased according to the holding time in the pressing process. In the process of time, the reduction ratio of the workpiece thickness decreased due to the surface area increment of the workpiece, while the pressure on the workpiece declined. In order to reduce the bulging ratio we introduced a temperature difference between the upper and the lower punch.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.458-465
• /
• 1998

This paper presents an inverter-driven induction motor used as the traction motor for a high speed drive system that is required safety, reliability and performance and so on, In the respect of traction motor design, it is mainly showed the weight reduction inclination and characteristic investigation due to V/f driving pattern variation of inverter. Particularly, the reduction of V/f ratio pattern effects on the weight of traction motor and badly on the increase of phase current of traction motor in starting point. This method of weight reduction design have to be reached the decision with not only motor but also the consideration of inverter system because of the heat capacity, weight and material cost of inverter according to the increase of current.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.2E
• /
• pp.38-45
• /
• 2005

The noise reduction of the In-The-Ear (ITE) hearing aid (HA) can be achieved by arrays of microphones. Each of the right and the left ears was assumed to have two HA microphones. These arrays of HA microphones produce particular patterns of directivity by some time delay between two microphones. The directivity pattern geometrically increase the S/N ratio. The boundary element method (BEM) was used for the three dimensional simulation of the HA directivity pattern with the two pairs' microphone arrays. The separation between two microphones was fixed to 10 mm. The time delay between the two microphones was calculated to produce the most narrow directivity pattern in the fore front of the head. The variation of the time delay was examined in accordance with input frequencies. This numerical analysis may be then applied for the calculation of the time delay parameter of the digital hearing aid DSP chip.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.277-280
• /
• 2008

Recently, a demand of nano/micro patterned polymer for display or biochip has been rising. Then many studies have been carried out. Nano/micro-embossing is a deformation process where the workpiece materials is heated to permit easier material flow and then forced over a planar patterned tool. In this work, the hot-emboss process is performed with different forming conditions; forming temperature, load, press hold time, to get the proper condition for linear pattern fabrication on plated-type polymers (PC). Replicated pattern depth increases in proportion to the forming temperature, load and time. Reduction of the workpiece thickness increases according to press hold time. In process of time, reduction ratio of workpiece thickness decreases because of surface area increment of the workpiece and pressure decline on it.

• Wind and Structures
• /
• v.32 no.4
• /
• pp.309-319
• /
• 2021

The vortex-drift pattern over a girder surface, actually demonstrating the complex fluid-structure interactions between the structure and surrounding flow, is strongly correlated with the VIVs but has still not been elucidated and may be useful for modeling VIVs. The complex fluid-structure interactions between the structure and surrounding flow are considerably simplified in constructing a vortex model to describe the vortex-drift pattern characterized by the ratio of the vortex-drift velocity to the oncoming flow velocity, considering the aerodynamic work. A spring-suspended sectional model (SSSM) is used to measure the pressure in wind tunnel tests, and the aerodynamic parameters for a typical streamlined closed-box girder are obtained from the spatial distribution of the phase lags between the distributed aerodynamic forces at each pressure point and the vortex-excited forces (VEFs). The results show that the ratio of the vortex-drift velocity to the oncoming flow velocity is inversely proportional to the vibration amplitude in the lock-in region and therefore attributed to the "lock-in" phenomena of the VIVs. Installing spoilers on handrails can destroy the regular vortex-drift pattern along the girder surface and thus suppress vertical VIVs.