• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.159-165
• /
• 2001

Recently Moire and PMP(Phase Measuring Profilometry) are adopted as a practical methodology for non-contact 3-D measurement of free surface. These methods extract the 3-D informations from the images of the object projected with stripe-pattern light. This paper presents a simple projector generating stripe-pattern light using expensive polygon mirror. In this projector, slit-beam is generated with a Laser diode and a rod lens and the laser diode is switched on/off synchronizing with the rotation of the polygon mirror. So its structure is very simple and light-weighted compared to the existent projection methods using several lenses and it is also easy to change the pitch and the phase of the stripe pattern. Experimental results show that the intensity profile of the stripe pattern can be approximated with sinusoidal curve by reducing the pitch of the stripe pattern.

• Design & Manufacturing
• /
• 제17권4호
• /
• pp.42-51
• /
• 2023

In this study, we investigated the injection molding technology of thick-walled light guides, which are parts that control the light source of automotive lamps. Through injection molding analysis, the gate position that can minimize product shrinkage and deformation was selected, and a mold reflecting the analysis results was manufactured to evaluate the effect of injection speed and holding pressure on transferability during micro-pattern molding through experiments. When designing an injection mold for products with varying thicknesses, it was found that installing the gate on the side of the thicker part was advantageous for reducing volume shrinkage and deformation. It was found that the effect of shrinkage due to thickness may be greater than the position of the gate on pattern transferability. The pattern transfer error decreased as the injection speed and holding pressure increased, and it was found that increasing the injection speed was relatively effective.

• 융합신호처리학회논문지
• /
• 제7권4호
• /
• pp.161-168
• /
• 2006

본 논문에서는 LCD 조립이 완료된 제품에 대해 색상보정 기법을 이용한 LCD 패턴검사 방법을 제안하였다. 기존의 검사 시스템은 패턴 매칭에 의한 검사 기법을 많이 사용하고 있다. 이러한 방법은 LCD의 백라이트(back light) 장치의 휘도차이, 액정의 광특성, 구동특성에 의해 투과되는 빛의 차이, 주위 조명에 의한 색차 등을 보정 할 수 없으며, 또한 이로 인해 불량검출의 효율성을 저하시키는 원인이 된다. 제안하는 검사 방법은 다양한 원인에 의해 발생하는 LCD의 색상 차를 보정한 후 패턴 매칭을 통해 불량을 검출하는 방법이다. 먼저, 검사 대상인 LCD 패턴의 색상을 기준 영상에서 설정된 색상으로 보정한다. 색상이 보정된 영상은 다양한 전처리 기법을 적용하여 패턴 검사를 수행한다. 실험을 통하여 본 연구에서 제안한 알고리듬은 LCD 패널에서 여러 가지 불량품을 검출 할 수 있었고, 또한 제안된 방식은 기존의 방식과 비교하여 불량 검출이 용이함을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1758-1763
• /
• 1991

This paper describes a new method to determine the 3D-shape of objects consisting of specular planar surfaces. This method exploits a light source which is made of a diffuse plane with a grid pattern encoded in an M-sequence and uses a single image of the light source reflected by the objects to acquiring orientations and positions of the surfaces of the objects. When grid lines of the light source are reflected by a specular planar surface and perspectively projected on an image plane, a set of lines vanishing at a point are obtained on the image plane. The orientation of the specular planar surface is determined by using the vanishing point, and the position is determined by using the correspondence between lines on the image and lines on the light source, which is obtained by employing a characteristic regularity of the M-sequence. Before the vanishing points are calculated, the lines on the image are classified and correlated with the surfaces of objects by using slopes and positions of the lines and the regularity of the M-sequence. This method requires only a single image.

• 한국정보과학회논문지:시스템및이론
• /
• 제32권3호
• /
• pp.133-147
• /
• 2005

LCD BLU(Back-Light Unit)의 설계에는 광선추적 기법이 많이 사용되고 있으며, 이러한 기법을 통하여 도광판 전면으로 출사되는 빛의 휘도, 휘도의 균일도, 광효율 등을 수치적으로 예측할 수 있다. 휘도와 휘도의 균일도 등과 같은 항목은 BLU 설계에 있어서 매우 중요한 요소 중의 하나이며, 이러한 BLU의 광학적 특성은 도광판의 후면에 인쇄된 잉크패턴에 가장 많을 영향을 받고 있다 따라서 높은 휘도와 균일도를 발생시킬 수 있는 최적화된 잉크패턴을 설계하는 것은 BLU의 설계에 있어서 가장 중요한 부분 중의 하나이다. 본 논문에서는 최적의 잉크패턴을 설계하기 위하여 직접탐색(Direct Search) 기법 중에서 Holder Mead의 심플렉스탐색(Simplex Search) 알고리즘을 적용하였다. 직접탐색 기법은 최적의 잉크패턴을 계산하는 것과 같은 비선형적이고, 비연속적이며, 미분불가능한 함수의 최적점을 계산하는 분야에 많이 적용되고 있다. 본 논문에서는 여러 가지 실험을 통하여 심플렉스탐색 기법이 최적의 잉크패턴을 설계하는데 있어서 매우 효율적이며 안정적으로 사용될 수 있음을 보여주며, 이러한 최적화 기법으로 인하여 BLU 설계기능을 개선할 수 있음을 보여준다

• 오토저널
• /
• 제15권3호
• /
• pp.89-95
• /
• 1993

This paper presents the development of CAD system for the design of lens of the Turn Signal Lamp that can model and simulate its optical performance. The system consists of three main modules: skin surface modeling module, inner lens modeling module and optical performance simulation module. Skin surface geometry can be modeled by the input of data file and inner lens can be modeled by the input of only four parameter using its geometric characteristics. Also light distribution pattern, the barometer of optical performance is generated by means of finite ray tracing method. The system display modeled geometry, ray tracing and generated light distribution pattern.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.213-216
• /
• 2007

LGP (light guide plate) of LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of the major components which affects the product quality of LCD. In the present study, the optical patterns of LGP(2.2") are manufactured by three different methods, namely, laser ablation, chemical etching and LiGA - reflow, respectively. The pattern surface images and roughness of mold and product were compared to check the optical characteristics. From the results of measurement the optical patterns fabricated by LiGA - reflow method showed the best geometric structure as intended in design and the lowest roughness among those.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.229-230
• /
• 2007

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.8-14
• /
• 2023

In this study, basic research was conducted on manufacturing technology of thick-walled light guide a component that controls the light source of automobile lamps. As a preliminary study for manufacturing the final injection molded parts, a model for analyzing the influence of micro patterns on light guides is presented. The optical characteristics of the light guide were analyzed according to the change of the curvature radius of the micro-optical pattern, and the injection molding characteristics of the light guide according to the change of injection molding conditions were analytically evaluated. It was confirmed that the luminance uniformity improves as the R value decreases for changes in the micro-pattern R value, but it was confirmed that there are technical limitations in actual injection mold core processing and high-replication injection molding. Injection molding analysis showed that cooling channel design is very important compared to general injection molding due to thick-wall characteristics and thickness variation. It was also confirmed that the cooling channel has a great influence on the cycle time and birefringence result due to residual stress. As a result of analyzing the influence of filling time, holding condition, and cooling on shrinkage, it was found that the cooling water temperature has a significant effect on the shrinkage of ultra-fine light guide parts, and the holding condition also has a significant effect.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.263-266
• /
• 2002

An optical method for surface roughness estimation based on statistical analysis of the light intensity of a scattered laser beam pattern. The method is very simple but has a disadvantage that no more information than the averaged roughness is estimated. In this study a new try was conducted to derive more advanced surface information from the details of the light intensity distribution. Some periodic ripples among the light intensity distribution being assumed to relate with scratch left on the machined surface, a corresponding surface profile is estimated from the ripples using FFT and IFFT algorithm. IFFT technique is used to extract some dominant signal components among the intensity distribution. Compared to the measured profiles by a stylus type surf-tester, the profiles obtained through the proposed method are probably acceptable in a sense of the profile shape. Calibration of the amplitude needs more works in the future.