• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.627-628
• /
• 2008

• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.989-996
• /
• 2008

The purpose of this study is to provide the basic knowledge for the pattern development of a flared skirt. Two flat pattern (FP) methods, the concentric circle method and the corrected concentric circle method, and a draping were used for pattern making. Using these patterns, skirts were made with lengthwise grain in the centerline. The influence of pattern making method on the silhouette of the flared skirt was evaluated by the hemlines formed at the skirt worn in a dress form. Moreover, the combined influence of pattern making method and cutting direction on the silhouette of the flared skirt was examined with the draping pattern (DP) skirt and a FP skirt with $45^{\circ}$ bias grain in the centerline. The DP skirt had more uniform nodes and formed a stable wave form than the FP skirts throughout the whole hemlines. The number of nodes was reduced with lining in the two FP skirts, whereas the number of nodes was not changed in the DP skirt. The unit wave form of all the skirts by three patterns showed long loop form, and the slope angles of the unit wave form of the two FP skirts were higher than that of the DP skirt. The silhouette of the flared skirt was highly influenced by the shape of the waist circumference line in patterns. The DP skirt with lengthwise grain in the centerline showed good silhouette with uniform nodes and high marking efficiency, compared to the FP skirt with $45^{\circ}$ bias grain in the centerline.

• 대한기계학회논문집A
• /
• 제41권4호
• /
• pp.251-255
• /
• 2017

미세 패턴의 기계적 가공에서는 버의 발생이 불가피하고, 패턴과 버의 크기가 매우 작아 이를 구분하기 어렵다. 본 연구에서는 turning machine을 이용하여, 원통형 공작물의 옆면에 패턴의 피치와 높이가 각각 60, $1{\mu}m$인 마이크로 패턴을 제작하고, 패턴의 형상을 이용하여 버의 형상과 생성 메커니즘을 정의하였다. 또한, 자기연마 디버링을 이용하여 마이크로 패턴의 정밀도를 높이고자 하였다. 그 결과, 미세패턴의 제작 시, 공구의 이송방향에 따라 버의 생성방향이 결정됨을 확인할 수 있었다. 또한, 자기연마디버링 공정에서 자속밀도와 공구의 회전속도가 각각 40mT, 1600rpm일 때, 패턴의 높이는 $1.018{\mu}m$로 측정되었으며, 자기연마 디버링에 가장 적합한 조건임을 알 수 있었다.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.86-92
• /
• 2005

In this paper a forward-backward can extrusion process are analyzed by using rigid-plastic FEM simulation. FEM simulation is conducted to investigate forming characteristics such as deformation modes fur different process parameters. Design parameters such as thickness ratio, punch angle, friction factor and diameter ratio are selected to study the effect of them on the pattern of material flow. The analysis is focused mainly on the influences of the design factors on deformation pattern in terms of forming load, extruded length ratio and volume ratio. It is known for the simulation that the forming load, the length ratio and the volume ratio increase as the thickness ratio (TR), the wall thickness in forward direction to that in backward direction, decreases. The various punch angles have slight influence on the forming load. length ratio and volume ratio. However friction factor have little effect on the forming characteristics such as the forming load, volume ratio and so on. In addition the forming load increases as diameter ratio (DR), the outer diameter of a can in forward direction to that in backward direction, increases. Furthermore the extruded length ratio is lowest with a certain value of DR=0.85 among diameter ratios. Pressure distribution exerted on the die-material interface is illustrated schematically.

• 로봇학회논문지
• /
• 제12권2호
• /
• pp.228-238
• /
• 2017

The CALEB10 is a multi-legged biomimetic underwater robot. In the last research, we developed a swimming pattern named ESPG (Extended Swimming Pattern Generator) by observing diving beetle's swimming actions and experimented with a positive buoyancy state in which CALEB10 floats on the water. In this paper, however, we have experimented with CALEB10 in a neutral buoyancy state where it is completely immersed in water for pitch motion control experiment. And we found that CALEB10 was unstably swimming in the pitch direction in the neutral buoyancy state and analyzed that the reason was due to the weight proportion of the legs. In this paper, we propose a pitch motion control method to mimic the pitch motion of diving beetles and to solve the problem of CALEB10 unstably swimming in the pitch direction. To control the pitch motion, we use the method of controlling additional joints while swimming with the ESPG. The method of obtaining propulsive force by the motion of the leg has a problem of giving propulsive force in the reverse direction when swimming in the surge direction, but this new control method has an advantage that a propulsive moment generated by a swimming action only on a target pitch value. To demonstrate validity this new control method, we designed a dynamics-based simulator environment. And the control performance to the target pitch value was verified through simulation and underwater experiments.

• 한국가구학회지
• /
• 제28권1호
• /
• pp.47-52
• /
• 2017

With the rapid economical and technological progress in China, the demand for wine increased tremendously along with the need for wine storage furniture and wine related products. Although demand for furniture increased, consumers' emotional need toward high quality design product has not been met properly. As the quality of people's life improves, they pursue better materials providing them with higher mental satisfaction. To meet the specific demand of Chinese market stated above, the direction of this report is set as to study pattern elements of Chinese traditional lattice and combine them with wine storage furniture design and crafting, which is originated from western culture. By doing that, the study is aimed to suggest a new direction of Chinese modern design and to improve the fundamental notion of Chinese furniture design. Although wine and wine racks are from western world, the wine mini-bar designed in this study stands out for its beauty and taste of eastern culture. It not only fits perfectly to the habits and taste of wine lovers, but also goes very well with fusion style interior design trend in modern China. The furniture carries the charm of eastern cultural tradition and elegance of modern furniture design in one.

• 한국통신학회논문지
• /
• 제17권12호
• /
• pp.1437-1450
• /
• 1992

본 논문에서는 손바닥의 interdigital영역으로 부터 특징패턴을 추출하는 과정과 이 특징패턴과 관련된 자료를 이용한 개인식별 방법을 제안하였다. 처리과정은 interdigital영역을 일정한 크기로 분할하고 각 분할된 영역에 대하여 융선의 분포에 따른 4방향의 방향 코드를 부여한후 이것을 분석하는 것에 의해 특징패턴의 존재 유무와 1차 중심점을 검출하였다. 검출된 1차 중심점의 주변 제한된 영역에 대해서만 세선화와 융선 추적을 통하여 특징패턴의 종류와 2차 중심점(core)을 구하였다. 2차 중심점들을 연결하는 특징패턴 좌표계를 설정하고 각 중심점에 대한 상대적 거리와 방향정보 특징 패턴의 종류등에 대한 특징 파라미터를 구하였다. 식별실험은 각 특징패턴의 종류와 수, 존재위치에 의하여 판단하거나 특징 파라미터를 비교, 분석하는 것에 의해 수행하였다.

• 전자공학회논문지
• /
• 제51권11호
• /
• pp.146-154
• /
• 2014

텍스쳐 분류에 사용되는 방식 중 하나인 지역적 이진화 패턴은 일반적으로 영상 내의 평탄한 부분, 에지, 코너의 분포를 사용한다. 그러나 영상이 가지는 방향성을 고려하지 않고, 단순히 크고 작음만을 비교하는 지역적 이진화 패턴의 특성때문에 화소간 차이를 반영하지 못하는 문제점이 있다. 또한 영상의 분포를 사용하기 때문에 작은 크기의 영상에 대해서는 분류 성능이 저하된다. 이런 문제를 해결하기 위해 본 논문에서는 영상의 방향성 분포와 고유치 행렬을 이용한 세부 분류 기법을 제안한다. 지역적 이진화 패턴으로 초기 분류에서 누락된 텍스쳐 영상에 대하여 두 가지 특징을 이용하여 세부적으로 분류한다. 첫째, 영상이 가질 수 있는 방향을 여덟 가지로 양자화하고 그 방향들의 분포를 계산한다. 둘째, 구조 행렬을 이용하여 나온 고유치 중 큰 값의 분포를 구한다. 모의 실험을 통해 지역적 이진화 패턴만을 사용하였을 때 대비 제안 방법이 약 8% 정도 분류 정확도가 향상됨을 보였다.

• 한국환경과학회지
• /
• 제16권4호
• /
• pp.467-477
• /
• 2007

A numerical study with Envi-met model is experimented to investigate the characteristics of wind pattern in apartment complex. In all case, most conditions such as wind speed, temperature, and surface features are considered as the same, but wind direction is the only different factor. The wind directions considered in this study have a meaning of prevailing wind direction. When the prevailing wind with the direction of $170^{\circ}$ blows into the complex, the ventilation passage toward the outside of complex is formed and the stagnation of air is not expressed. In case of having the direction of $300^{\circ}$, most evident ventilation passages are composed. When the inflow wind direction is the northeast, $30^{\circ}$, there is some possibility of stagnation phenomenon. This is because the arrangement of buildings makes a right angle with the inflow wind direction.

• 복식문화연구
• /
• 제17권5호
• /
• pp.746-757
• /
• 2009

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern, width of materials, and marker orientation using man's shirts. To compare the marking efficiency of shirts, plain and check-patterned materials with the intervals of $1.5{\times}1.5cm$, $3{\times}3cm$, and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on materials width, the highest efficiency was obtained with nap-either-way position of 150cm, plain materials and lowest efficiency with nap-one-way position of 150cm, $5{\times}5cm$ check-pattern materials. Regardless of the direction of marker position, the marking efficiency of 150cm width was higher than 110cm width in the plain, $1.5{\times}1.5cm$ and $3{\times}3cm$ check-pattern interval, but the marking efficiency of 110cm width was higher than 150cm width in the $1.5{\times}1.5cm$ check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and material width, the highest efficiency was obtained with nap-either-way position. And nap-up-and-down and nap-one-way follows next. Third, in the comparison of marking efficiency depending on check-pattern interval, the efficiency of plain materials was higher than those of check-patterned materials. And increasing the intervals decreased marking efficiency and vice versa. So the lowest efficiency was obtained with $5{\times}5cm$ check patterned materials.