• 전자공학회논문지C
• /
• 제36C권4호
• /
• pp.17-29
• /
• 1999

본 논문은 데이터 의존적인 CMOS 회로(예: DSP) 의 전력량을 감축하기 위한 상위 수준 합성 기법에 대한 연구이다. 상위수준 합성은 스케줄링, 자원 및 레지스터 할당의 세가지로 나우어서 수행한다. 스케줄링시의 저전력 설계의 목적은 자원할당 시 입력을 재 사용할 수 있는 가능성을 증가시키는 것이다. 스케줄링 후에 자원 및 레지스터 할당 문제는 가중차기 부가된 앙립 그래프로 표현하여 최소비용흐름 알고리즘을 수행함으로써 스위칭 동작횟수가 적은 해를 얻는다. 제안된 알고리즘은 저전력 레지스터 및 자원 할당 문제에 대하여 O({{{{ { n}^{3 } }}}}) (n은 그래프의 노드수) 시간에 최적해를 제공한다. 벤치마크 회로에 대한 실험 결과는 15%의 전력 감축 효과를 나타낸다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.187-187
• /
• 2010

In this study, we investigated the effect of electrodes on resistance switching of TaOx film. Pt, Ni, TiN, Ti and Al metal electrodes having the different oxidation degree were deposited on TaOx/Pt stack. Unipolar resistance switching behavior in Pt or Ni/TaOx/Pt MIM stacks was investigated, but bipolar resistance switching behavior in TiN, Ti or Al /TaOx/Pt MIM stacks was shown. We investigated that the voltage dependence of capacitance was decreased with higher oxidation degree of metal electrodes. Through the C-V results, we expected that linearity ($\alpha$) and quadratic ($\beta$) coefficient was reduced with an increase of interface layer between top electrode and Tantalum oxide. Transmission Electron Microscope (TEM) images depicted the thickness of interface layer formed with different oxidation degree of top electrode. Unipolar resistance switching behavior shown in lower oxidation degree of top electrode was expected to be generated by the formation of the conducting path in TaOx film. But redox reaction in interface between top electrode and Tantalum oxide may play an important role on bipolar resistance switching behavior exhibited in higher oxidation degree of top electrode. We expected that the resistance switching characteristics were determined by oxidation degree of metal electrodes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권2호
• /
• pp.271-287
• /
• 2013

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3081-3099
• /
• 2012

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.113-119
• /
• 2005

A crack emanating from an internal electrode or a conducting damage path in ferroelectric ceramic actuators is analyzed. The boundary of the domain switching zone near the edge of the internal electrode in a ceramic multilayer actuator is determined based on the nonlinear electric theory. The stress intensity factor induced by a ferroelectric domain switching under small scale conditions is numerically obtained for flaws of various sizes near the electrode edge. It is found that stress intensity factor near the crack tip depends on the material property of the electrical nonlinearity.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권3호
• /
• pp.188-194
• /
• 2000

This paper presents new Zero-Voltage-/Zero-Current-Switching (ZVZCS) PWM DC-DC converters. The proposed soft-switching technique achieves ZVS and ZCS simultaneously at both turn-on and turn-off of the main switch and diode by using only one auxiliary switch. Also, the proposed soft-switching technique is suitable for not only minority but also majority carrier semiconductor devices. The auxiliary circuit of the proposed topology is placed out the main power path and therefore, there are no voltage/current stresses on the main switch and diode. The operating principle of the proposed topology is illustrated by a detailed study with a boost converter as an example. Theoretical analysis, simulation and experimental results are presented to explain the proposed schemes.

• 한국통신학회논문지
• /
• 제30권3B호
• /
• pp.72-84
• /
• 2005

광 버스트 스위칭 방식은 제어 채널과 데이터 채널을 분리하여 버스트 제어 패킷을 제어 채널로 먼저 전송하고 Offset 시간 후에 도착할 데이터 버스트에 대한 데이터 채널을 예약하는 단방향 예약 특성을 가지고 있다. 그러나 이러한 특성 때문에 버스트 간에 데이터 채널을 예약하기 위한 경합이 발생하게 되며 경합에 실패한 버스트는 손실되어 심각한 QoS (Quality of Service) 저하를 초래한다. 따라서 본 논문에서는 버스트 손실을 최소화하기 위해 노드에서 발생되는 버스트 손실이 임계값을 초과할 경우 버스트 우선순위와 버스트가 생성된 근원지 정보에 따라 유동적으로 경로를 재설정하는 동적 경로 설정 기법을 제안하였다. 이와 같이 제안된 기법은 기존 경로로 전송되고 있는 버스트 흐름에 영향을 최소화하기 위하여 링크 비용을 고려한 최소 경로 비용을 기반으로 하고 있다. 또한, 제안된 기법의 성능 평가를 위하여 버스트 손실률, 버스트 처리율 및 평균 흡수 관점에서 기존의 기법과 비교 평가하였다.

• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1073-1080
• /
• 2023

인터넷 네트워크의 발전과 속도 개선, 이를 배경으로 한 각종 플랫폼의 발전은 다양한 콘텐츠의 생산과 소비의 급속한 확장을 불러왔다. 하지만 기존의 IP를 기반으로 한 인터넷 체계는 이런 급속한 데이터의 증가에 효율적으로 대처할 수 없는 현황이다. 이에, 콘텐츠 중심 네트워크(CCN, Contents Centric Network)라는 대안이 등장해 호스트 중심이 아닌 콘텐츠를 중심으로 보다 효율적인 데이터 송수신이 가능해졌다. 본 논문에서는 CCN의 주요 연구 분야 중 하나인 실시간 스트리밍 서비스에서의 중간노드 이동성에 대해 다룰 것이며, RSSI 감지를 통한 보다 효율적인 경로 전환을 통해 네트워크 과부하를 최소화할 것이다. 즉, 정보요청자와 정보제공자 사이에 위치한 중간노드가 이동했을 때 예비 경로를 선택하고 전환하는 방법을 개선함으로써 데이터 전송의 단절은 없으면서도 네트워크에 경로 전환으로 인한 불필요한 부하가 발생하지 않도록 관리하는 매커니즘을 제안한다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권3호
• /
• pp.5-11
• /
• 2003

A simulation model for radial magnetic bearings is presented. The model incorporates hysteresis, saturation and eddy current effects. A simple magnetization model that describes hysteresis and saturation is proposed. Eddy currents are taken into consideration by assuming that they are generated by single-turn fictitious coils wrapped around each magnetic flux path. The dynamic equations describing the simulation model can easily incorporate the operation of switching power amplifier. A simulation of a typical 8-pole radial magnetic bearing produces switching waveforms very similar to the experimental observation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권5호
• /
• pp.1606-1623
• /
• 2015

Optical switching will be applied in datacenter networks because electronic switching is costly and power-consuming. In this paper, considering the ring-based interconnection using optical switching in the core of a datacenter, we study the home circuit (HC) construction for the labeled optical burst switching with home circuit (LOBS-HC), a new paradigm trying to share wavelengths among the HCs from the same source. In particular, aiming to construct HCs dynamically and properly, a scheme named optimal path matching and symmetric HC matching (OPM-SHM) is proposed. The main idea of OPM-SHM is to dynamically construct HCs by sharing wavelength(s) not only among the same-source HCs but also with symmetric HCs which have different sources other than the original LOBS-HC features. The simulation results demonstrate that OPM-SHM achieves better performance than some other methods in terms of burst loss rate and wavelength utilization of physical links. More specially, it maintains good load balancing for the datacenter network using an LOBS-HC ring. In addition, due to the symmetric feature of SHM, the proposed scheme can decrease the upper bound of the average hop count of the routing paths to half of the ring size.