• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.8
• /
• pp.45-55
• /
• 1997

To design a ATM Switch which ahs advantages in high sped packet switching, it is essential to set multiple paths between input ports and output ports and to design a new packet transfer technique on that paths for decreasing Packet Loss by conflicts in internal Switch Plane. We propose new packet transfer method, Alternate Path Transfer Mechanism by Dynamic Bypass Transfer Method which can solve conflict problem in Banyan network easily. Proposed ATM Switch consists of Banyan networks, Input/Ouput Port, Bypass Link, and Bypass Link Controller. Packets caused conflicts in SEs have another chances of packet transfer over alternate switching planes by using this mechanism.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.35-42
• /
• 2003

In this paper, we classified the wavelength reservation mechanisms of optical burst switching (OBS), and investigated the path length priority effect of the offset time/delayed reservation (OT/DR)-based scheme like the just-enough-time (JET) protocol. And, we showed that the fiber delay line (FDL)-based scheme can avoid the path length priority effect in multiple hop network environments. Also, we proposed a novel FDL/DR with hop-by-hop priority increasing (HPI) scheme which can improve the end-to-end throughput by increasing the priority of bursts hop-by-hop using the input FDLs at each node. The simulation results showed that the proposed FDL/DR with HPI scheme could avoid the path length priority effect and enhance the end-to-end throughput in multiple hop network environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2805-2826
• /
• 2021

In most cases, the routing policy of networks shows a preference for a static one-to-one mapping of communication pairs to routing paths, which offers adversaries a great advantage to conduct thorough reconnaissance and organize an effective attack in a stress-free manner. With the evolution of network intelligence, some flexible and adaptive routing policies have already proposed to intensify the network defender to turn the situation. Routing mutation is an effective strategy that can invalidate the unvarying nature of routing information that attackers have collected from exploiting the static configuration of the network. However, three constraints execute press on routing mutation deployment in practical: insufficient route mutation space, expensive control costs, and incompatibility. To enhance the availability of route mutation, we propose an OpenFlow-based route mutation technique called Polymorphic Path Transferring (PPT), which adopts a physical and virtual path segment mixed construction technique to enlarge the routing path space for elevating the security of communication. Based on the Markov Decision Process, with considering flows distribution in the network, the PPT adopts an evolution routing path scheduling algorithm with a segment path update strategy, which relieves the press on the overhead of control and incompatibility. Our analysis demonstrates that PPT can secure data delivery in the worst network environment while countering sophisticated attacks in an evasion-free manner (e.g., advanced persistent threat). Case study and experiment results show its effectiveness in proactively defending against targeted attacks and its advantage compared with previous route mutation methods.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.4
• /
• pp.279-285
• /
• 2019

This study proposes an enhanced switching pattern that can improve energy transfer efficiency in an active cell-balancing circuit using a multiwinding transformer. This balancing circuit performs cell balancing by transferring energy stored in a specific cell with high energy to another cell containing low energy through a multiwinding transformer. The circuit operates in flyback and buck-boost modes in accordance with the energy transfer path. In the conventional flyback mode, the leakage inductance of the transformer and the stray inductance component of winding can transfer energy to an undesired path during the balancing operation. This case results in cell imbalance during the cell-balancing process, which reduces the energy transfer efficiency. An enhanced switching pattern that can effectively perform cell balancing by minimizing the amount of energy transferred to the nontarget cells due to the leakage inductance components in the flyback mode is proposed. Energy transfer efficiency and balancing speed can be significantly improved using the proposed switching pattern compared with that using the conventional switching pattern. The performance improvements are verified by experiments using a 1 W prototype cell-balancing circuit.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.35-43
• /
• 2012

The explosive growth of Internet traffic cause by smart equipment such as smart phone has led to a dramatic increase in demand for data transmission capacity and network control architecture, which requires high transmission rates beyond the conventional transmission capability. Next generation networks are expected to be controlled by Generalized Multi-Protocol Label Switching(GMPLS) protocol suite and operating at multiple switching layers. In order to ensure the most efficient utilization of multilayer network resources, effective global provisioning that providing the network with the possibility of reacting in advance to traffic changes should be provided. In this paper, we proposes a new path selection scheme in multilayer optical networks based on the vertical PCE architecture and a different approach to efficiently exploit multiple PCE cooperation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2568-2588
• /
• 2021

Shared mesh protection (SMP) protects traffic against failures occurring in a working path, as with linear protection, and allows resource sharing of protection paths with different endpoints. The SMP mechanism coordinates multiple protection paths that require shared resources when failures occur on multiple working paths. When multiple failures occur in SMP networks sharing limited resources, activation can fail because some of the resources in the protection path are already in use. In this case, a node confirming that a resource is not available has the option to wait until the resource is available or to withdraw activation of the protection path. In this study, we recognize that the protection switching time and the number of protected services can be different, depending on which option is used for SMP networks. Moreover, we propose a detailed design for the implementation of SMP by considering options and algorithms that are commonly needed for network nodes. A simulation shows the performance of an SMP system implemented with the proposed design and utilizing two options. The results demonstrate that resource utilization can be increased or protection switching time can be shortened depending on the option selected by the network administrator.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.235-238
• /
• 1990

This paper presents a method of finding the optimal path of which is considered the switching cost and the reliability index. The problem is formulated as an optimization problem and solved by the maximum flow/mimimum cut method. The objective of this paper is to find the optimal path and minimize the failure cost and switching cost. Presented method has been simulated and the results are discussed.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.544-546
• /
• 2008

An improved dual-path energy recovery circuit (ERC) using a current source and a voltage source for plasma display panel (PDP) is proposed. The proposed ERC uses the voltage source to charge a panel and the current source to discharge the panel. Thus, the proposed circuit can make the panel charge to $V_S$ and discharge to 0V, fully and it is possible to achieve zero voltage switching (ZVS) of all switches in H-bridge inverter and zero current switching (ZCS) of all switches in the ERC. Moreover, it has less conduction and switching loss in ERC devices by the dual energy recovery paths for charging and discharging the panel. Furthermore, it has features of canceling the gas discharge current, high performance and the low cost ERC components. The operation principle and features of the proposed ERC are presented in detail and verified with 42-inch SD PDP.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.205-213
• /
• 2006

A cost-effective magnetic-coupled AC-PDP sustain driver with low switching loss is proposed. The transformer reduces current stress in the energy recovery switches which affects circuit cost and reliability. The turns-ratio can be used to adjust the sustain pulse slopes which affect gas discharge uniformity. Dividing the recovery paths prevents abrupt changes in the output capacitance and thereby switching losses of the recovery switches is reduced. In addition, the proposed circuit has a more simple structure because it does not use the recovery path diodes which also afford a large recovery current. By reducing the current stress and device count in the energy recovery circuit, the proposed driver may have decreased circuit cost and improved circuit reliability.

• Convergence Security Journal
• /
• v.23 no.1
• /
• pp.3-8
• /
• 2023

Multi-domain optical transport networks are not fundamentally interoperable and require an integrated orchestration mechanism and path provision mechanism at the entire network level. In addition, ensuring network survivability is one of the important issues. MPLS-TP (Multi-Protocol Label Switching-Transport Profile) defines various protection/recovery methods as standards, but does not mention how to calculate and select protection/recovery paths. Therefore, an algorithm that minimizes protection/recovery collisions at the optical circuit packet integrated network level and calculates and sets a path that can be rapidly protected/recovered over the entire integrated network area is required. In this paper, we proposed an algorithm that calculates and sets up a path that can be rapidly protected and restored in a T-SDN network composed of multiple ring-mesh topology.