• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1221-1228
• /
• 2004

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers load and the centrifugal force by rotation of table. It demands $4{\times}10^7$ cycle but has $4{\times}10^6{\sim}8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller. The repair expense for it amounts to $30\%$ of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner for vertical roller mill using HDM and fatigue analysis and makes the estimation for safety of vertical roller mill.

• Journal of Korean Academy of Nursing Administration
• /
• v.19 no.2
• /
• pp.265-272
• /
• 2013

Purpose: This study was done to identify the effects and relationships of humor, job satisfaction, job stress and intent to turnover for nurses and suggest a theoretical structural path diagram among the variables. Methods: Data were collected at 6 hospitals located in Seoul, and Gyeonggi Province, from June to September, 2010. Participants were 275 nurses. Data were analyzed using Amos 19.0 for Structural Equation Modeling. Results: Humor had significant effects on job satisfaction (${\beta}$=.15, t=2.29, p=.022) and indirect effects on the intent to turnover in this model ($X^2$=44.18, df=23, RMSEA=0.05, TLI=0.97). But humor did not affect job stress unlike results of previous studies (t=-.02, p=.771). Conclusion: Humor may not affect job stress under the very stressful conditions of the health care environment. The model showed the effect of humor contributed to increases in job satisfaction but did not decrease job stress. Higher levels of job satisfaction could decrease the intent to turnover. Consequently, humor would be helpful in increasing job satisfaction to diminish nurse turnover. Further studies are suggested to investigate causal relationships among humor, burnout, and other emotional and organizational variables.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2000.11a
• /
• pp.45-67
• /
• 2000

Broadband access technologies plays an important role in the national information infrastructure. In the evolution path of the information infrastructure, the relative economics of alternative access technology is the most critical determining factor. In this paper, we discuss the economics of local loop access technologies of existing technologies, such as, ADSL, HFC, and new PLC. To do this, we suggest appropriate configuration of access network system and its associated numerical equations. To modelize access network system and drive the numerical equations, we consider the DS (Double Star) and the T&B (Tree ＆ Brench) architecture and analyse the adequate block diagram of each access system for each technology We introduce the density of subscriber as a key variable and the equation of allocating optimal number of cell in a service area. We analyze the relative economics of local loop architecture in two different situations, that is, urban and rural. From the empirical implementation, we found that for the case of urban area, where the cost of cable and infrastructure is not necessary, there is not much difference in the cost per one subscriber. However, for the case of rural region, we found that there is remarkable difference in the cost per one subscriber among technologies. Therefore we conclude that the economics of local loop architecture is depend on the density of subscriber and existing network infrastructures. we hope that this paper contribute to the optimal technology selection of consmer, technology Providers, and government.

• Journal of Distribution Science
• /
• v.16 no.8
• /
• pp.15-27
• /
• 2018

Purpose - The purpose of the study is to examine the relationships among the following retail operations variables: retail store operations (i.e., store management, sales personnel, promotion of merchandise), success of assortment planning, firm performance (i.e., market share, overall competitive position, profitability, product quality, consumer satisfaction), and retail buyer's demographics and firm's characteristics. Research design, data, and methodology - After conducting a pilot test, the survey was conducted in Seoul, South Korea. With using the listwise deletion method, 378 usable data sets were analyzed. For data analysis, descriptive statistics, factor analysis, and Structural Equation Modeling (SEM) methods were employed. Results - As evidenced from the path diagram, the relationship between retail store operations and the success of assortment planning is strong and significant. Retail store operations affect firm performance, though at a weaker significance than it affects the success of assortment planning. The relationship between the success of assortment planning and firm performance, is the strongest relationship observed by this research. Conclusions - The findings of this empirical study contribute to the retail/fashion buying/management field by confirming (a) the importance of assortment planning for retail firm performance and (b) the role of store operations for successful assortment planning and firm performance for fashion retailers.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.174.1-174.1
• /
• 2012

현재 인공위성 개발 프로젝트들을 계획하고 일정계획을 수립하기위해 간트차트가 널리 활용되고 있다. 간트차트는 프로젝트의 각 작업들이 언제 시작하고 종료되는지에 대한 작업 일정을 막대 도표를 이용하여 표시하는 프로젝트 일정표로 다양한 형태로 변경하여 사용할 수 있으나 작업경로를 표시할 수 없으며 계획의 변화에 대한 적응성이 약한 단점이 있다. 또한 일목요연하게 눈으로 보여줄 수 있으나 효과적인 프로젝트 관리에 중요한 활동 사이의 어떤 관계에 대한 정보를 주지 못한다. 인공위성개발과 같은 복잡한 프로젝트에 대해 간트차트와 더불어 PERT(Program evaluation and review technique)와 CPM(critical path method)과 같은 네트워크 도(Network Diagram)와 함께 사용될 수 있도록 그 이론과 활용방안에 대해 기술하고자 한다. PERT와 CPM은 큰 프로젝트를 계획하고 조정하기 위해 폭넓게 사용되는 두 가지 기법이다. PERT와 CPM을 사용하면 프로젝트 활동에 대한 그래프를 통한 도시, 프로젝트 소요시간 추정, 프로젝트 완료시간 준수를 위해 중요한 활동의 식별, 전체 프로젝트에 대한 지연 없이 가능한 각 활동의 지연시간 추정과 같은 이점이 있다. PERT와 CPM은 독립적으로 개발되었지만, 많은 공통점이 있다. 더 나아가서 둘 사이에 원래 존재했던 차이점은 많은 부분은 서로의 특징을 도입하면서 거의 사라졌다. 실제적으로 볼 때, 두 기법은 지금 같은 기법이며, 기술된 특징과 절차는 PERT분석 뿐 아니라 CPM 분석에도 적용될 수 있을 것이다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.61-69
• /
• 2005

The topology of NPC inverter coupled with the large number of devices used increases the probability of device failure. It's necessary to develop an optimal remedial strategy which can be used to continue the application when fault occurs. The fault tolerance is obtained by the use of the proposed method. The proposed method utilizes that the one phase load with the failed power device could be connected to the center-tap of the DC-link capacitor in order to dc-link voltage with balance and the sinusoidal phase current with constant amplitude under the single power device fault condition. The strategy described in this paper is expected to provide an economic alternative to more expensive redundancy techniques.

• Transactions of Materials Processing
• /
• v.24 no.3
• /
• pp.176-180
• /
• 2015

The current study is concerned with the prediction of fracture strains for DP980 steel sheets over a wide range of loading paths. The use of DP980 steel is increasing significantly in automotive industries for enhanced safety and higher fuel efficiency. The material behavior of advanced high-strength steels (AHSSs) sheets sometimes show unpredictable and sudden fracture during sheet metal forming. A modified Lou-Huh ductile fracture criterion is utilized to predict the formability of AHSSs because the conventional forming limit diagram (FLD) constructed based on necking is unable to evaluate the formability of AHSSs sheets. Fracture loci were extracted from three dimensional fracture envelopes by assuming the plane-stress condition to evaluate equivalent plastic strains at the onset of fracture for a wide range of loading paths. Three different types of specimens -- pure shear, dog-bone and plane strain grooved -- were utilized for tensile testing to calibrate the fracture model of DP980 steel sheets. Fracture strains of each loading path were evaluated such that there shows little deviation between fracture strains predicted from the fracture model and the experimental measurements. From the comparison, it is clearly shown that the three dimensional fracture envelopes can accurately predict the onset of the fracture of DP980 steel sheets for complicated loading conditions from compressive loading to shear loading and to equibiaxial tensile loading.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.2
• /
• pp.58-66
• /
• 2018

This paper represents a systematic approach aimed at improving the performance of the proportional integral (PI) controller for the Advanced Power Reactor (APR) 1400 Feedwater Control System (FWCS). When the performance of the PI controller offers superior control and enhanced robustness, the steam generator (SG) level is properly controlled. This leads to the safe operation and increased the availability of the nuclear power plant. In this paper, a systems engineering approach is used in order to design a novel PI controller for the FWCS. In the reverse engineering stage, the existing FWCS configuration, especially the characteristics of the feedwater controller as well as the feedwater flow path to each SG from the FWCS, were reviewed and analysed. The overall block diagram of the FWCS and the SG was also developed in the reverse engineering process. In the re-engineering stage, the actual design of the feedwater PI controller was carried out using a genetic algorithm (GA). Lastly, in the validation and verification phase, the existing PI controller and the PI controller designed using GA method were simulated in Simulink/Matlab. From the simulation results, the GA-PI controller was found to exhibit greater stability than the current controller of the FWCS.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.2
• /
• pp.194-204
• /
• 2023

Models based on diffusion-limited aggregation (DLA) have been extensively used to explore the mechanisms of dendritic particle aggregation phenomena. The physical and chemical properties of systems in which DLA aggregates emerge are given in their fractal. In this paper, we present a comprehensive study of the growth of electrodeposited copper dendrites in flat plate electrochemical cells from a fractal perspective. The effects of growth time, applied voltage, copper ion concentration, and electrolyte acidity on the morphology and fractal dimension of deposited copper were examined. 'Phase diagram' set out the variety of electrodeposited copper fractal morphology analysed by metallographic microscopy. The box counting method confirms that the electrodeposited dendritic structures manifestly exhibit fractal character. It was found that with the increase of the voltage and copper ion concentration. The fractal copper size becomes larger and its morphology shifts towards a dendritic structure, with the fractal dimension fluctuating around 1.60-1.70. In addition, the morphology of the deposited copper is significantly affected by the acidity of the electrolyte. The increase in acidity from 0.01 to 1.00 mol/L intensifies the hydrogen precipitation side reactions and the overflow path of hydrogen bubbles affects the fractal growth of copper dendrites.

• Journal of Intelligence and Information Systems
• /
• v.18 no.4
• /
• pp.117-127
• /
• 2012

Due to the recent expansion of the Web 2.0 -based services, along with the widespread of smartphones, online social network services are being popularized among users. Online social network services are the online community services which enable users to communicate each other, share information and expand human relationships. In the social network services, each relation between users is represented by a graph consisting of nodes and links. As the users of online social network services are increasing rapidly, the SNS are actively utilized in enterprise marketing, analysis of social phenomenon and so on. Social Network Analysis (SNA) is the systematic way to analyze social relationships among the members of the social network using the network theory. In general social network theory consists of nodes and arcs, and it is often depicted in a social network diagram. In a social network diagram, nodes represent individual actors within the network and arcs represent relationships between the nodes. With SNA, we can measure relationships among the people such as degree of intimacy, intensity of connection and classification of the groups. Ever since Social Networking Services (SNS) have drawn increasing attention from millions of users, numerous researches have made to analyze their user relationships and messages. There are typical representative SNA methods: degree centrality, betweenness centrality and closeness centrality. In the degree of centrality analysis, the shortest path between nodes is not considered. However, it is used as a crucial factor in betweenness centrality, closeness centrality and other SNA methods. In previous researches in SNA, the computation time was not too expensive since the size of social network was small. Unfortunately, most SNA methods require significant time to process relevant data, and it makes difficult to apply the ever increasing SNS data in social network studies. For instance, if the number of nodes in online social network is n, the maximum number of link in social network is n(n-1)/2. It means that it is too expensive to analyze the social network, for example, if the number of nodes is 10,000 the number of links is 49,995,000. Therefore, we propose a heuristic-based method for finding the shortest path among users in the SNS user graph. Through the shortest path finding method, we will show how efficient our proposed approach may be by conducting betweenness centrality analysis and closeness centrality analysis, both of which are widely used in social network studies. Moreover, we devised an enhanced method with addition of best-first-search method and preprocessing step for the reduction of computation time and rapid search of the shortest paths in a huge size of online social network. Best-first-search method finds the shortest path heuristically, which generalizes human experiences. As large number of links is shared by only a few nodes in online social networks, most nods have relatively few connections. As a result, a node with multiple connections functions as a hub node. When searching for a particular node, looking for users with numerous links instead of searching all users indiscriminately has a better chance of finding the desired node more quickly. In this paper, we employ the degree of user node vn as heuristic evaluation function in a graph G = (N, E), where N is a set of vertices, and E is a set of links between two different nodes. As the heuristic evaluation function is used, the worst case could happen when the target node is situated in the bottom of skewed tree. In order to remove such a target node, the preprocessing step is conducted. Next, we find the shortest path between two nodes in social network efficiently and then analyze the social network. For the verification of the proposed method, we crawled 160,000 people from online and then constructed social network. Then we compared with previous methods, which are best-first-search and breath-first-search, in time for searching and analyzing. The suggested method takes 240 seconds to search nodes where breath-first-search based method takes 1,781 seconds (7.4 times faster). Moreover, for social network analysis, the suggested method is 6.8 times and 1.8 times faster than betweenness centrality analysis and closeness centrality analysis, respectively. The proposed method in this paper shows the possibility to analyze a large size of social network with the better performance in time. As a result, our method would improve the efficiency of social network analysis, making it particularly useful in studying social trends or phenomena.