• Preventive Nutrition and Food Science
• /
• 제4권4호
• /
• pp.231-235
• /
• 1999

Three black rices(Suwon 415, Iksan 427 and Sanghaehyanghyeolla) harvested in Korea were examined in their pasting characteristics, and minor nutrients(vitamins and minerals) in comparison to those of a brown rice (Dongjinbyo), whereas Iksan 427 and Sanghaehyanghyeolla were waxy rices(0.4 and 0.6%, respectively). Iksan 427 and Sanghaehyanghyeolla showed similar viscosity pattern with significantly low pasting temperatures and viscosity. Brown rice showed higher pasting viscosity and pasting temperature than black rices, and its viscosity pattern was similar to Suwon 415. Brown rice and Suwon 415 displayed higher hardness but lower adhesiveness of their gels. Black rices contained more non-carbohydrate components and dietary fiber than brown rice. From the amino acid analysis, black rices contained more acid amino acids (aspartic and glutamic acids) than brown rice. Among the black rices, Suwon 415 had the highest content of total essential amino acids(4.3%). Black rices also contained higher amounts of vitamin B complexes (thiamin, riboflavin and niacin) and minerals(K, Mg and Ca) than brown rice. Sanghaehyanghyeolla showed an exceptionally high amount of Ca (12mg%).

• 농업과학연구
• /
• 제42권4호
• /
• pp.439-446
• /
• 2015

Kimbugak is one of Korea's traditional snacks made of laver. This study was conducted to investigate the physical drying and frying characteristics of kimbugaks made by a pasting & garnishing machine. The drying and frying characteristics should be analyzed to develop a continuous operation system for manufacturing kimbugak because kimbugak has a high moisture content after pasting process. Materials for pasting and garnishing on laver were rice gruel and sesame. The aluminum shelf with square hole was selected as a drying shelf. The recommended size of the square hole type was $1.5mm{\times}1.5mm$ because characteristics of deformation and easy separation from the shelf were excellent at the hole size. The drying time of 2 hours was also recommended with the drying temperature of $70^{\circ}C$ based on the test results such as dried condition (good), moisture conten t (3.7%), deformation (12.1 mm), and shrinkage rate (19.8%). As the frying conditions for dried kimbugaks, recommended oil temperature and frying time were $170^{\circ}C$, 15 seconds, respectively when corn oil was used. In the case of frying for undried kimbugaks, recommended oil temperature and frying time were $210^{\circ}C$, 2 - 3 minutes, respectively for improvement of work efficiency.

• Journal of Biosystems Engineering
• /
• 제40권4호
• /
• pp.320-326
• /
• 2015

Purpose: Kimbugak is one of Korea's traditional snack foods made of laver. Mechanization of the manufacturing process is necessary to produce kimbugak in large quantities and standardize the products for industrialization. This study was conducted to develop a machine that can simultaneously accomplish the two processes of pasting and garnishing for manufacturing kimbugak, and test its performance. Methods: A pasting and garnishing machine was designed, and its target work efficiency was set at 720 sheets/h. The performance was tested based on the physical characteristics such as work efficiency, pasting uniformity, and garnishing uniformity. Results: With the developed technology, kimbugak could be produced up to a productive rate of 840 sheets/h on a single machine. The pasting uniformity ranged from 91.5% to 96.8%, and a garnishing uniformity of more than 90% could be obtained. Conclusions: It is expected that this approach to developing a machine with the functions of pasting and garnishing can contribute to the mechanization of the manufacturing process to produce Korean traditional foods including kimbugak in large quantities and standardize the products for industrialization.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.329-329
• /
• 2017

The study was conducted to investigate the effects of different harvesting time on pasting properties of starch in three colored rices. Seven major parameters of starch pasting properties, peak viscosity (PKV), hot pasting viscosity (HPV), cool pasting viscosity (CPV), setback (CPV minus PKV), breakdown (PKV minus HPV), peak time, and pasting time were determined by Rapid Visco Analyzer. The peak viscosity, hot viscosity, cool viscosity and peak time were influenced by different harvesting times. Pasting time was delayed slightly with prolonged harvesting time in all rice cultivars. Pasting temperature in each rice cultivar differed from each harvesting time, and pasting temperature of the two rice cultivars, Hongjinju and Joseongheugchal, showed the highest at the 40 days after heading and then it decreased at the final harvesting time. With the delay of the harvesting time, peak viscosity, hot viscosity, cool viscosity, setback value and pasting temperature did not exhibit a regular trend depending on their genetic characteristics. Branch chain length distribution of amylopectin was demonstrated a distinct difference among these colored rices. In changes of amylopectin branch chain-length distribution, the amylopectin structure of Hongjinju rice cultivar as affected by different harvesting time, the shortest chain length of amylopectin in rice starch harvested at 20 days after heading was characterized by the significant increase in A chains with $DP{\geq}12$ and remarked decrease in long chains $37{\leq}DP$ compared to that of 30, 40, and 50 days after heading. In particular, when harvesting time is delayed the distribution percentage of short chain (A chains with $DP{\geq}12$) was increased except for the rice which harvested 20 days after heading. The similar results were also observed in Sintoheugmi rice cultivar like that of Hongjinju rice cultivar. Otherwise, distribution percentage of the shortest chain length of amylopectin in rice starch harvested at 20 days after heading was characterized by the significant decrease in A chains with $DP{\geq}12$ and remarked increase in B chains $13{\leq}DP{\geq}24$ compared to that of 30, 40, and 50 days after heading.

• 한국식품과학회지
• /
• 제46권5호
• /
• pp.593-600
• /
• 2014

찹쌀 전분과 검(XAT, LBG, 및 XAT:LBG) 혼합물의 페이스팅 특성과 이들 페이스트의 점탄특성 및 냉해동 안정성을 조사하여 일반 쌀 전분(20% 수준의 아밀로오스 함유)의 물성을 대체할 수 있으며 낮은 냉해동 안정성을 개선할 수 있는 찹쌀 전분-검 혼합물의 조성을 제시하고자 하였다. 찹쌀 전분은 검(XAT 및 LBG) 및 검 혼합물(XAT:LBG)에 의해 건조중량 대비 19:1의 비율로 대체하여(총 고형분 함량 5%, w/w) 페이스팅 점도 특성을 조사하였을 때 찹쌀 전분-검 혼합물 내의 XAT 농도가 낮아질수록 찹쌀 전분의 페이스팅 온도에 근접하였다. 최고점도는 찹쌀 전분-XAT 혼합물에서 가장 낮았으며 XAT와 LBG를 75:25의 비율의 검 혼합물로 찹쌀 전분을 대체하였을 때(X075L025)가 가장 높았다. 또한 찹쌀 전분-XAT:LBG의 최고점도에서 최종점도 사이의 온도 프로파일 범위에서 찹쌀 전분만을 이용하였을 때보다 높은 수준의 페이스팅 점도를 나타내었다. 찹쌀 전분-검 혼합물 페이스트의 점탄특성은 찹쌀 전분-XAT:LBG (X050L050 및 X025L050) 페이스트들에 한해 5 rad/s의 높은 진동수에서 일반 쌀 전분 페이스트의 저장탄성률과 유사해졌다. 손실탄성률은 모든 찹쌀 전분-검 혼합물 페이스틀이 찹쌀 전분과 일반 쌀 전분들 보다 높은 수준을 나타내었다. 냉해동 안정성과 관련하여 일반 쌀 전분 페이스트에 비해 찹쌀 전분 및 찹쌀 전분-검 혼합물들이 높은 냉해동 안정성을 나타내었다. 이 중 찹쌀 전분-XAT와 찹쌀 전분-XAT:LBG (X075L025)가 7회의 냉해동 순환처리에도 syneresis 현상이 관찰되지 않았다. 모든 결과들을 고려할 때 일반 쌀 전분을 대체할 수 있는 찹쌀 전분-검 혼합물은 XAT와 LBG를 건조중량 비율로 50:50으로 혼합한 검 혼합물을 찹쌀 전분의 건조중량의 5% 수준으로 대체하는 것으로 판단되었다.

• 한국식품저장유통학회지
• /
• 제19권2호
• /
• pp.257-262
• /
• 2012

시중에서 유통되는 쌀가루의 전분 및 호화특성을 조사하기 위하여 17종의 쌀가루를 구입한 후 수분함량, 수분결합력, 용해도, 팽윤력, 아밀로오즈 함량, 손상전분, 입도크기 및 전분의 호화특성을 분석하였다. 시중에서 유통되는 쌀가루의 경우 수분함량은 7.64-14.97% 범위를 보였고, 수분결합능력은 95.22-232.94%로 확인되었다. 시중에서 유통되는 쌀가루의 용해도 1.97-37.40%였으며, 팽윤력은 1.33-5.76 범위를 나타냈다. 쌀가루의 아밀로오즈 함량은 4.32-22.45%였으며, 시중 유통 쌀가루의 입도는 32.11-305.67 ${\mu}m$로 다양한 입도를 보였다. 시중유통 쌀가루의 손상전분 함량 중 3.17%가 가장 낮은 전분 손상도를 보였고, 17.54%는 가장 높은 손상도를 보이는 것으로 확인되었다. 시중에서 판매되는 쌀가루의 호화특성을 조사한 결과 최고점도는 17.74-295.95RVU였으며, 최종 점도의 경우도 15.47-360.34RVU 범위이었다. 시중에서 유통되는 쌀가루의 호화 온도는 $69.72^{\circ}C$가 가장 낮았으며, $90.13^{\circ}C$가 시중에서 유통되는 쌀가루 중 가장 높은 호화 온도를 보였다. 본 연구결과 손상전분의 함량이 높은 시료의 경우 수분 결합력이 높고, 입도 크기가 작은 쌀가루의 시료는 최종 점도가 높은 경향을 나타내는 것으로 확인되었다.

• 한국작물학회지
• /
• 제51권spc1호
• /
• pp.292-296
• /
• 2006

Three rice cultivars of Goami2 (G2), Ilpumbyeo (IP), and Baegjinju (BJJ) of which physicochemical properties are significantly different, were blended by a simplex-lattice mixture design. The effect of blending those rice cultivars on pasting and texture properties were observed. Rapid Visco Analysis (RVA) indicated that the onset gelatinization temperature of pure blend of G2 rice $(83.80{\pm}0.07^{\circ}C)$ was higher than that of IP $(68.08{\pm}0.01^{\circ}C)$ and BJJ $(68.08{\pm}0.04^{\circ}C)$. Increasing G2 rice resulted in lower peak and breakdown viscosity, and adhesiveness and cohesiveness, whereas higher setback viscosity and hardness. Pasting and texture properties of IP and BJJ indicated that G2 rice has quite different physical characteristics compared to IP and BJJ. Thus, it is expected that blending those three rice cultivars can be used to formulate a desirable rice blend on purpose, furthermore to promote the consumption of G2 rice, which has higher indigestible carbohydrate contents.

• 한국작물학회지
• /
• 제46권5호
• /
• pp.360-366
• /
• 2001

Flour physicochemical properties of six Korean waxy wheat lines and their parental plants, including Kanto 107 and BaiHuo, which have partially null in GBSS (granule bound starch synthase), were evaluated in this study. The very low amylose content (3.20%) of Korean waxy wheat lines, which had been influenced by the null in all three GBSS isoforms encoded by three Wx loci, could result in the higher starch swelling power (25.15%), lower starch and flour pasting temperature (61.37$^{\circ}C$; 65.85$^{\circ}C$), and higher starch pasting peak viscosity and breakdown (246.60 RVU; 161.50 RVU) than those of their parental plants. In addition to high swelling and pasting properties, Korean waxy wheat lines had the higher protein content (12.80%), alkaline water retention capacity (97.39%), SDS sedimentation volume (80.33 $m\ell$) and damaged starch content (4.35 %) than those of their parental plants.

• 한국작물학회지
• /
• 제56권2호
• /
• pp.107-112
• /
• 2011

Oat flour was purchased and investigated for quality characteristics of oat bread. Antioxidant and flour pasting properties of oat flour, and water content, weight, volume, Hunter color value, texture of bread were measured. DPPH radical scavenging capacity (%) of oat extract was 68.49%. Pasting temperature of oat flour ranged between $66.60^{\circ}C$ and $70.93^{\circ}C$. Flour pasting properties of sample added with 10 and 30% oat flour was shown similar results compared with wheat flour. Final viscosity of sample was increased by adding concentration of oat flour (up to 311.65 RVA). Water content (%) of bread was shown increasing trend by adding oat flour. Weight of bread loaf with 100% oat flour was shown higher score than other samples. Volume of loaf by adding oat flour of 10, 30, and 50 % ratio was 550, 450, and 388 mL, respectively. The Hunter color $L^*$ values of bread by adding oat flour was dark compared with wheat bread. Color value of bread added 10% oat flour was similar results with $L^*$ values of bread with wheat flour. The bread added with 20 and 30% oat flours had the higher hardness, gumminess, and chewiness compared with other samples. Cohesiveness of the bread with wheat flour showed higher than that of bread added with oat flour and increased by storage period. The growth of total viable cell was inhibited depending on the concentration of oat flour during storage.

• 한국작물학회지
• /
• 제68권3호
• /
• pp.99-105
• /
• 2023

Starch characteristics and pasting properties of Tongil-type rice varieties with different amylose content were analyzed. Three different Tongil-type rice varieties and one Japonica-type rice variety were examined for their properties. Tongil-type rice varieties have longer panicles and higher rice yield (721-765 kg per 10a) than Boramchan, a Japonica-type high-yield rice variety. The protein content of the Tongil-type rice variety was higher than that of Boramchan. Japonica-type rice varieties had lower amylose content than Japonica-type rice varieties, except for Amimyeon (Milyang355). Amimyeon had higher protein content than the other varieties, and its amylose content was particularly high at 39.2%. The distribution of starch granule sizes of the four varieties was similar, and the particle size corresponding to D50 was approximately 87.8-81.9 ㎛. The pasting properties of rice flour varied among varieties. The Dasanbyeo and Hanarum2 amylogram patterns were similar. These two varieties had a higher peak viscosity (PV) and lower setback (SB) than Boramchan. In the case of Amimyeon, the hot paste viscosity (HPV), cool paste viscosity (CPV), and SB were significantly higher than those of the other Toingil-type varieties, and the breakdown (BD) was very low, showing pasting properties significantly different from that of the other varieties. The onset (T_o), peak (T_p), and conclusion temperature (Tc) of gelatinization of rice flour from Amimyeon were lower than those of the other tested varieties. In addition, the gelatinization temperature, measured using differnetial scanning calorimetry (DSC), and BD, measured using al rapid visco analyzer (RVA) were low in Amimyeon. Amylose content showed a high positive correlation with pasting time (PTi), HPV, and SB and a negative correlation with PV and BD.