• Journal of the Society of Disaster Information
• /
• v.13 no.2
• /
• pp.199-212
• /
• 2017

Rapid roadway snow removal is significantly important due to difficult occurrence estimation of heavy snowfall disasters by global warming and climate change. Local governments of S. Korea have snow removal equipments and vehicles based on past experiences without considering snowfall and roadway characteristics. The objective of this research is to develop the demand estimation procedure for snow removal equipments and vehicles based on regional snowfall and roadway characteristics. This research first classifies regional snowfall characteristics using KMO's ten-year snowfall data. Second, roadway snow removal length is computed for local governments. Real possession data is compared with demand estimation of snow removal equipments & vehicles for each local government with roadway snow removal scenarios. Finally, required demands of snow removal equipments & vehicles are predicted by concerning regional snowfall amount and required snow removal hours. Results from this research are used for developing heavy snowfall disaster management policies for optimal demands and snow removal routes of 229 local governments.

• Journal of the Korean Society for information Management
• /
• v.32 no.3
• /
• pp.49-68
• /
• 2015

There were not many ways to share research data in the past, but modern information technology has allowed us to share these data. As data sharing has its side effects, researchers' attitude and practice to sharing data vary by individual discipline. This study found that foreign learned societies, NGOs, universities and research funders support data sharing in a utilitarian perspective, while major publishers demand it so that other researchers can verify the data in peer review. It is important that open data policy should be settled down in near future for evoking further studies and encouraging progress in science. In order to establish data sharing successfully in Korea, efforts could be made by researchers, universities, academic libraries, and governments as well as the stakeholder. This study also proposed specific ways to perform it.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.81-90
• /
• 2008

Bus passengers need some time to adapt to the changed bus route or free bus transfer system which is part of the public transportation system restructuring plan. This research is focused on the characteristics of monthly patterns of bus passengers. The period of stabilization of bus passenger demand after the rearrangement of bus route system by a time series were analysed. In order to look into the characteristics of bus passenger demand by month, data on the number of monthly bus passengers of recent five years in metropolitan cities across the nation was collected. Kendall's coefficient of concordance is used to test whether the cities showed concordance with respect to the number of monthly bus passengers during a period of five years. The study collected and performed a time series analysis of data on the number of monthly bus passengers during the past ten years in Daegu metropolitan area which carried out a new bus route plan in February 2006. The number of monthly bus passengers in 2006 was estimated using the time series analysis. The city of Daegu found that after six months the estimated and actual values displayed a similar pattern. This result can be applied to other cities in estimating the passenger demands in the future.

• Journal of Korean Public Health Nursing
• /
• v.32 no.1
• /
• pp.5-18
• /
• 2018

Purpose: We present improvements to the Korean home visiting healthcare service based on analysis of Korean home visiting healthcare services considering recent sociodemographic changes and demands for healthcare services. Methods: This is a review study in which the results are derived through a literature review and data analysis. We collected data through a search of electronic databases, Google Scholar, and governmental websites. Results: Changes in Korean home visiting healthcare services are classified into four stages: 'introduction (1990-2000)', 'pilot project (2003-2006)', 'nationwide expansion (2007-2012)', 'various types (2013-2018)'. Korean home visiting healthcare service based on public health centers has achieved outcomes such as improved health behavior and health management, increased health management ability, and establishment of comprehensive healthcare infrastructure. Conclusion: In the future, the demand for home visiting healthcare service will increase steadily because of deepening social polarization, rapid aging of the population, and increases in chronic diseases. To improve health management and health equity, we suggest that Korean home visiting healthcare service will expand to all the people as a core public health service. It is necessary to establish a management team for various types of home visiting healthcare service in the public health center.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.10-14
• /
• 2016

Korean satellite development projects were divided military objectives such as national security, and commercial communication satellites. The First geostationary Korean earth observation satellite, GeoKOMPSAT is a turning point to concern another way to utilizing satellite. In the past, the main concern was the sharp ground images, now days, it is more important to make high added value from satellite data. In particular, environmental payload, GEMS mounted on the satellite GeoKOMPSAT-2 will monitor air quality which is not observed by visual material, may be referred to as case by utilizing the satellite. Satellite data utilization is likely to receive a great influence on the appropriate public policy data. If the public is expected to be fully revealed that potential demand. It is time to change the management policy on the security aspects of weak satellite data. Depending on the expanding use of satellites, it is necessary to investigate the status of disclosing satellite data, and suggests policy options for the distribution of materials for the environment satellite characteristics.

• Journal of People, Plants, and Environment
• /
• v.22 no.5
• /
• pp.455-466
• /
• 2019

This study was carried out to analyze trends in floral products and services through the big data analysis of various social networking services (SNSs) and then to provide objective marketing directions for the floricultural industry. To analyze the big data of SNSs, we used four analytical methods: Cotton Trend (Social Matrix), Naver Big Data Lab, Instagram Big Data Analysis, and YouTube Big Data Analysis. The results of the big data analysis showed that SNS users paid positive attention to flower one-day classes that can satisfy their needs for direct experiences. Consumers of floral products and services had their favorite designs in mind and purchased floral products very actively. The demand for flower items such as bouquets, wreaths, flower baskets, large bouquets, orchids, flower boxes, wedding bouquets, and potted plants was very high, and cut flowers such as roses, tulips, and freesia were most popular as of June 1, 2019. By gender of consumers, females (68%) purchased more flower products through SNSs than males (32%). Consumers preferred mobile devices (90%) for online access compared to personal computers (PCs; 10%) and frequently searched flower-related words from February to May for the past three years from 2016 to 2018. In the aspect of design, they preferred natural style to formal style. In conclusion, future marketing activities in the floricultural industry need to be focused on social networks based on the results of big data analysis of popular SNSs. Florists need to provide consumers with the floricultural products and services that meet the trends and to blend them with their own sensitivity. It is also needed to select SNS media suitable for each gender and age group and to apply effective marketing methods to each target.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.999-1009
• /
• 2022

The Chuncheon Mullori area is an underprivileged area for water welfare that does not have a local water supply system. Here, water is supplied to the village by using a small-scale water supply facility that uses underground water and underground water as the source. To solve the problem of water shortage during drought and to prepare for the increasing water demand, a sand dam was installed near the valley river, and this facility has been operating since May 2022. In this study, in order to evaluate the reliability of water supply when a sand dam is assumed during a drought in the past, groundwater runoff simulation results using MODFLOW were used to generate inflow data from 2011 to 2020, an unmeasured period. After performing SWAT-K basin hydrologic modeling for the watershed upstream of the existing water intake source and the sand dam, the groundwater runoff was calculated, and the relative ratio of the monthly groundwater runoff for the previous 10 years to the monthly groundwater runoff in 2021 was obtained. By applying this ratio to the 2021 inflow time series data, historical inflow data from 2011 to 2020 were generated. As a result of analyzing the availability of water supply during extreme drought in the past for three cases of demand 20 m³/day, 50 m³/day, and 100 m³/day, it can be confirmed that the reliability of water supply increases with the installation of sand dams. In the case of 100 m³/day, it was analyzed that the reliability exceeded 90% only when the existing water intake source and the sand dam were operated in conjunction. All three operating conditions were evaluated to satisfy 50 m³/day or more of demand based on 95% reliability of water supply and 30 m³/day or more of demand based on 99% of reliability.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.1-23
• /
• 2014

Market forecasting aims to estimate the sales volume of a product or service that is sold to consumers for a specific selling period. From the perspective of the enterprise, accurate market forecasting assists in determining the timing of new product introduction, product design, and establishing production plans and marketing strategies that enable a more efficient decision-making process. Moreover, accurate market forecasting enables governments to efficiently establish a national budget organization. This study aims to generate a market growth curve for ICT (information and communication technology) goods using past time series data; categorize products showing similar growth patterns; understand markets in the industry; and forecast the future outlook of such products. This study suggests the useful and meaningful process (or methodology) to identify the market growth pattern with quantitative growth model and data mining algorithm. The study employs the following methodology. At the first stage, past time series data are collected based on the target products or services of categorized industry. The data, such as the volume of sales and domestic consumption for a specific product or service, are collected from the relevant government ministry, the National Statistical Office, and other relevant government organizations. For collected data that may not be analyzed due to the lack of past data and the alteration of code names, data pre-processing work should be performed. At the second stage of this process, an optimal model for market forecasting should be selected. This model can be varied on the basis of the characteristics of each categorized industry. As this study is focused on the ICT industry, which has more frequent new technology appearances resulting in changes of the market structure, Logistic model, Gompertz model, and Bass model are selected. A hybrid model that combines different models can also be considered. The hybrid model considered for use in this study analyzes the size of the market potential through the Logistic and Gompertz models, and then the figures are used for the Bass model. The third stage of this process is to evaluate which model most accurately explains the data. In order to do this, the parameter should be estimated on the basis of the collected past time series data to generate the models' predictive value and calculate the root-mean squared error (RMSE). The model that shows the lowest average RMSE value for every product type is considered as the best model. At the fourth stage of this process, based on the estimated parameter value generated by the best model, a market growth pattern map is constructed with self-organizing map algorithm. A self-organizing map is learning with market pattern parameters for all products or services as input data, and the products or services are organized into an $N{\times}N$ map. The number of clusters increase from 2 to M, depending on the characteristics of the nodes on the map. The clusters are divided into zones, and the clusters with the ability to provide the most meaningful explanation are selected. Based on the final selection of clusters, the boundaries between the nodes are selected and, ultimately, the market growth pattern map is completed. The last step is to determine the final characteristics of the clusters as well as the market growth curve. The average of the market growth pattern parameters in the clusters is taken to be a representative figure. Using this figure, a growth curve is drawn for each cluster, and their characteristics are analyzed. Also, taking into consideration the product types in each cluster, their characteristics can be qualitatively generated. We expect that the process and system that this paper suggests can be used as a tool for forecasting demand in the ICT and other industries.

• Journal of Digital Contents Society
• /
• v.17 no.5
• /
• pp.409-416
• /
• 2016

Recently, Big Data issue has become a buzzword and universities, industries and research institutes have been efforts to collect, analyze various data enabled. These things includes accumulated data from the past, even if it is not possible to analysis at this present immediately a which has the potential means. And we are obtained a valuable result from the collected a large amount of data via the semantic analysis. The demand for high-performance storage system that can handle large amounts of data required is increasing around the world. In addition, it must provide a distributed parallel file system that stability to multiple users too perform a variety of analyzes at the same time by connecting a large amount of the accumulated data In this study, we identify the I/O bandwidth of the storage system to be considered, and performance of the metadata in order to provide a file system in stability and propose a method for configuring the optimal environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1405-1408
• /
• 2005

An embedded system has been applied to many fields including households and industrial sites. In the past, user interface products with simple functions were commercialized .but now user demands are increasing and the system has more various applicable fields due to a high penetration rate of the Internet. Therefore, the demand for embedded system is tend to rise In this paper, we Implementation of an embedded system for image tracking. This system is used a fixed IP for the reliable server operation on TCP/IP networks. A real time broadcasting of video image on the internet was developed by using an USB camera on the embedded Linux system. The digital camera is connected at the USB host port of the embedded board. all input images from the video camera is continuously stored as a compressed JPEG file in a directory at the Linux web-server. And each frame image data from web camera is compared for measurement of displacement Vector. That used Block matching algorithm and edge detection algorithm for past speed. And the displacement vector is used at pan/tilt motor control through RS232 serial cable. The embedded board utilized the S3C2410 MPU Which used the ARM 920T core form Samsung. The operating system was ported to embedded Linux kernel and mounted of root file system. And the stored images are sent to the client PC through the web browser. It used the network function of Linux and it developed a program with protocol of the TCP/IP.