• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.427-429
• /
• 2005

Energy efficiency is the most challenging issue in wireless sensor network to prolong the life time of the network, as the sensors has to be unattended. Cluster based communication can reduce the traffic on the network and gives the opportunity to other sensors for periodic sleep and thus save energy. Passive clustering (PC) can perform a significant role to minimize the network load as it is less computational and light weight. First declaration wins method of PC without any priority generates severe collision in the network and forms the clusters very dense with large amount of overlapping region. We have proposed several modifications for the existing passive clustering algorithm to prolong the life time of the network with better cluster formation.

• Smart Structures and Systems
• /
• v.18 no.6
• /
• pp.1217-1231
• /
• 2016

In this research, a slotted patch antenna sensor is designed for wireless strain and crack sensing. An off-the-shelf RFID (radiofrequency identification) chip is adopted in the antenna sensor design for signal modulation. The operation power of the RFID chip is captured from wireless reader interrogation signal, so the sensor operation is completely battery-free (passive) and wireless. For strain and crack sensing of a structure, the antenna sensor is bonded on the structure surface like a regular strain gage. Since the antenna resonance frequency is directly related with antenna dimension, which deforms when strain occurs on the structural surface, the deformation/strain can be correlated with antenna resonance frequency shift measured by an RFID reader. The slotted patch antenna sensor performance is first evaluated through mechanics-electromagnetics coupled simulation. Extensive experiments are then conducted to validate the antenna sensor performance, including tensile and compressive strain sensing, wireless interrogation range, and fatigue crack sensing.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.31-38
• /
• 2011

In this paper, we propose an autonomous Indoor lighting control system in which indoor lighting devices are autonomously controlled such that electricity bills are minimized in our daily life. Our focus is to utilize Passive Infrared (PIR) sensors to detect the presence of human being indoor and automatically to control indoor lighting electric devices. A control algorithm is also devised to control the whole system. We justify the proposed system by demonstrating specific applications in our everyday life. Cost survey and experimental results also demonstrate the efficiency of the proposed system in real life.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1515_1516
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based micro-sensor was developed for simultaneous measurement of temperature and humidity. The developed sensor is composed of a SAW reflective delay lines structured by an IDT (Inter-Digital Transducer), four reflectors and humidity sensitive film (polyimide). Polyimide was dry-ecthed by RIE (Reactive Ion Etching) to obtain high roughness, which gives the large reaction area resulting in high sensitivity. In wireless testing using a network analyzer, sharp reflection peaks with high S/N ratio, small signal attenuation, and few spurious peaks were observed in the time domain. High sensitivity towards the temperature and humidiy were also observed in the large concentration range. The obtained sensitivity was $16.8^{\circ}/^{\circ}C$ for temperature sensor and $15.8^{\circ}$/%RH for humidity sensor.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.469-472
• /
• 2023

If temperature management is required in factory or environmental monitoring, temperature can be measured by connecting various sensors wired or wirelessly. Surface acoustic wave sensors measure temperature using changes in acoustic waves on the sensor surface according to temperature, and are useful for wireless networks. In this paper, in order to build a wireless temperature measurement system in the 900 MHz frequency band, the temperature characteristics of the passive SAW sensor were measured, and the analysis and removal of multipath reflection wave effect inside the high temperature chamber were conducted. The resonant frequency of the SAW sensor was measured, and radio transmission/reception and multipath reflected wave removal techniques were proposed in the shielded chamber.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.496-497
• /
• 2009

This paper describes about the realization of a remote RF sensor system and its applications. RF Sensor System was designed and realized on DSP over the range of high frequency such as about 200[KHz]. It should be "wireless", "implantable" and "batteryless". Futhermore, the system should be consist of passive components such as R, Land C. The measurement was given using the inductive coupling principle between primary source part and secondary sensor part. This newly developed parameter estimation system can be easily applied to the Ambient Intelligent System including the ubiquitous computing and the sensitive environmental changes.

• Journal of Sensor Science and Technology
• /
• v.25 no.5
• /
• pp.337-343
• /
• 2016

In this paper, we newly introduce a wireless identification system using a solar cell and RF transceivers. The reader sends interrogating signal to a transponder using LED visible light, and the transponder responds to the reader using RF signal. The transponder consists of a solar cell, an amplifier, a microprocessor, and an RF transmitter. The solar cell receives the visible light from the reader and generates current to supply electric power to the other devices in the transponder. At the same time, the solar cell detects interrogating signal in the reader light. The microprocessor senses the interrogating signal and generates a responding signal. The RF transmitter radiates the responding signal to the reader. The transponder is a passive circuit because it operates without external power. In experiments, the maximum read distance between a reader and a transponder was about 1.6 meter.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.1
• /
• pp.103-109
• /
• 2015

This paper introduces a multi-purpose smart fusion sensor. Normally, this type of sensor can contribute to energy savings specifically related to lighting and heating/air conditioning systems by detecting individuals in an office building. If a fire occurs, the sensor can provide information regarding the presence and location of residents in the building to a management center. The system consists of four sensors: a thermopile sensor for detecting heat energy, an ultrasonic sensor for measuring the distance of objects from the sensor, a fire detection sensor, and a passive infrared sensor for detecting temperature change. The system has a wireless communication module to provide the management center with control information for lighting and heating/air conditioning systems. We have also demonstrated the usefulness of the proposed system by applying it to a real environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.430-433
• /
• 2006

Wireless sensor network plays a prominent role in tracking the location of the target outdoor and indoor. This paper describes the implementation of the passive indoor location tracking system using ultrasonic and RF technologies that provides accurate location in the form of user space and position in three dimensions. Our system used a combination of RF and ultrasonic technologies to provide a location-support service to users and applicants. Ceiling-mounted beacons were spread through the building, publishing location information on an RF signal. The person carried a listener and the listener determined the location by calculating the distance from three beacons using triangulation algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1119-1123
• /
• 2006

Wireless sensor network plays a prominent role in tracking the location of the target outdoor or indoor. This paper describes the implementation of the passive indoor location tracking system using ultrasonic and RF technologies that provides accurate location in the form of user space and position in three dimensions. Our system used a combination of RF and ultrasonic technologies to provide a location-support service to users and applicants. Ceiling-mounted beacons were spread through the building, publishing location information on an RF signal. The person carried a listener and the listener determined the location by calculating the distance from three beacons using triangulation algorithm.