• Journal of Ginseng Research
• /
• v.20 no.1
• /
• pp.7-14
• /
• 1996

This study was performed to examine the effect of red ginseng total saponin and extract on memory in mice using one trial step-down type passive avoidance method. Red ginseng total saponins (No. 1: PD/PT ratio=1.24, No. 2: PD/PT ratio=1.47) were prepared with the different mixing ratio by using the parts of red ginseng. In single administration of total saponin No. 1 (100 mg/ kg, bw) or No. 2 (50 mg/kg, bw) increased the latency time as compared with control group but was not statistically significant. Treatment of total saponin No. 1 (50 mg/kg, bw) for 10 days produced an increase of latency time but was not statistically significant. In scopolamine-induced memory deficient mice total saponin No. 1 (50 mg/kg, bw) and No. 2 (100 mg/kg, bw) significantly improved the latency time. These results show that red ginseng total saponin may improve the memory of sco-polamine-induced memory deficient mice and have nootropic activity.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.469-474
• /
• 1990

The implementation of modern guidance law derived from optimal control theory requires accurate current states of target, for example, position, velocity and acceleration etc. But there is no sensors that measure the target states directly. So they are estimated from measurable data. For atmospheric missile engagement, direct application of the modern guidance laws may result In deterioration of Intercept performance because of poor observability associated with angles only-measurements by passive seeker and homing geometry. In this paper, a trajectory modulation method called "adaptive Intermittent maneuvers" is added to the modern guidance law, so the observability is enhanced and, consequently, improved the intercept performance. The estimation algorithm called "modified gain pseudo-measurement filter" is used for tracking filter. It is assumed that the passive seeker measure the angles between line of sight and Inertial frame. The Monte-Carlo simulation for realistic air-to-air Intercept scenario are conducted to demonstrate the effectiveness of intermittent maneuvers.ermittent maneuvers.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.352-355
• /
• 2003

27 passive systems in 21 mines constructed by The Coal Industry Promotion Board since 1996 were investigated to evaluate the treatment efficiency of systems and find problems in each system, which will eventually lead to the improvement or suggesting the alternative method of the passive treatment system. Problems in operation include overflow, leakage, inefficiency and unusablness. The efficiency of systems which has been evaluated by metal(Fe) removal rate and/or by acidity removal rate do not reflect the poor removal rate of S $O_4$$^{2-}$. Especially high concentration of S $O_4$$^{2-}$ and high COD in the beginning of the operation would decrease the bacteria activity due to the lack of the nutrition. To solve the problem of overflow the upflow-type SAPS is being considered.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.301-307
• /
• 1997

In this study, a new modified independent modal space control (IMSC), which relaxes the fundamental hardware limitation of IMSC, is suggested to handle vibration control problems using a virtual passive controller. This method has adapted a new stable switching algorithm between controlled modes and a virtual vibration absorber as a virtual passive controller in the independent modal space. It has been found that the new modified IMSC suggested in this paper, which can reduce the number of actuators, is shown to be simple and efficient in a realistic example of vibration control of a cantilever beam.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.607-612
• /
• 2007

A conventional passive TMD is only effective when it is tuned properly. In many practical applications, inevitable off-tuning of a TMD occurs because the mass in a building floor could change by moving furnishings, people gathering, etc. When TMDs are off tuned, TMDs their effectiveness is sharply reduced. This paper discusses the application of MR-TMD, semi-active damper, for the reduction of floor vibrations due to machine and human movements. Here, the groundhook and skyhook algorithm are applied to a single degree of freedom system representative of building floors. And displacement and velocity base control method are applied to reduce t100r vibration. The performance of the STMD is compared to that of the equivalent passive TMD. Comparison of the results demonstrates the efficiency and robustness of STMD with respect to equivalent TMD.

• Journal of Welding and Joining
• /
• v.29 no.5
• /
• pp.58-62
• /
• 2011

Stainless steels are alloy steels with a nominal chromium content of at least 11 percent, with other alloy additions. The stainlessness and corrosion resistance of these alloy steels are attributed to the presence of a passive oxide film on the surface. When exposed to conditions like Resistance Spot Welding (RSW) process that remove the passive oxide film, stainless steels are subject to corrosive attack. And exposure to elevated temperatures causes oxidation (discoloration) of areas around indentation in Spot welding. In this paper, deal with the effect of shielding gas (Ar) preventing the corrosion, oxidation of stainless steel. And find the optimal shielding gas flow rate. In addition, suggest effective purging method for direct/indirect spot welding process.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.147-158
• /
• 2012

In this paper, we present a demodulation structure suitable for a reader baseband receiver in a passive radio frequency identification (RFID) environment. In a passive RFID configuration, an undesirable DC-offset phenomenon may appear in the baseband of the reader receiver, which can severely degrade the performance of the extraction of valid information from the received tag signal. To eliminate this DC-offset phenomenon, the primary feature of the proposed demodulation structures for the received FM0 and Miller subcarrier signals is to reconstruct the signal corrupted by the DC-offset phenomenon by creating peak signals from the corrupted signal. It is shown that the proposed method can successfully detect valid data, even when the received baseband signal is distorted by the DC-offset phenomenon.

• Korean Journal of Occupational Health Nursing
• /
• v.16 no.2
• /
• pp.109-118
• /
• 2007

Purpose: The purpose of this study was to identify stress and coping patterns of manufacturing male workers. Method: Data were collected from 215 manufacturing male workers and analyzed by SPSS WIN 12.0 Results: The total job stress score was 41.41 and the mean of the daily hassles score was 1.60. Related to the coping type, direct-active coping was the highest among four types of coping. Indirect-active coping was the second, followed by direct-passive coping and indirect-passive coping. Job stress score and daily hassles score were highly correlated by passive coping types. Conclusion: Occupational health management program including coping strategy is required to relieve workers' stress.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.03a
• /
• pp.161-176
• /
• 2002

Collision avoidance is the most important part of a small vessel. Small and mediurn sized ships are surprisingly poor targets for radar reflection and are frequently in danger of being overrun by large vessels, even under good condition of visibility. One of the best way to prevent collisions at sea is to use as large and well designed a radar reflector. Thus, RCS(Radar Cross Section) increase is key element in the design of radar reflector. Radar Reflectors are normally classified into active-type and passive-type. In this paper, the RCS increase methods for passive-type reflector through shaping are explained, and analyzed with RCS performance test by computer simulation. As results from analysis, It is shown that the effective diameter of radar reflector is over 10 λ to provide a return above the threshold RCS of 25m$^2$, lower limit of detectability using X-band radar in a moderate sea.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.427-429
• /
• 2005

Energy efficiency is the most challenging issue in wireless sensor network to prolong the life time of the network, as the sensors has to be unattended. Cluster based communication can reduce the traffic on the network and gives the opportunity to other sensors for periodic sleep and thus save energy. Passive clustering (PC) can perform a significant role to minimize the network load as it is less computational and light weight. First declaration wins method of PC without any priority generates severe collision in the network and forms the clusters very dense with large amount of overlapping region. We have proposed several modifications for the existing passive clustering algorithm to prolong the life time of the network with better cluster formation.