• Bulletin of the Korean Chemical Society
• /
• 제12권5호
• /
• pp.540-544
• /
• 1991

Thin film being formed on the surface of cobalt in the early stage of electrochemically induced passivation was studied by the three-parameter ellipsometry. The growth of the passive film was complete in a few seconds from the onset of the passivating potential, and was followed by a slight decrease in the thickness in 4-40 seconds. The optical constants of the passive film changed gradually during the changes in the thickness. The thickness and the optical properties at the steady state of passivation depended on the potential of the electrode. From the coulometric data and the optical properties, the composition of the passive films was deduced to be close to those of CoO, ${Co_3}{O_4}$ and ${Co_2}{O_3}$ depending on the potential. Cathodic reduction in the presence of EDTA was found to be an efficient way to obtain film-free reference surface of cobalt.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.176-179
• /
• 2005

The increasing demand for high density packaging technologies and the evolution to mixed digital and analogue devices has been the con-set of increasing research in thin film multi-layer technologies such as the passive components integration technology. In this paper, Cu and TaO thin film with RF sputtering was deposited for spiral inductor and MOM capacitor on the $SiO_2$/Si(100) substrate. MOM capacitor and spiral inductor were fabricated for L-C band pass filter by sputtering and lift-off. We are analyzed and designed thin films L-C passive components for band pass filter at 900 MHz and 1.8 GHz, important devices for mobile communication system. Based on the high-Q values of passive components, MOM capacitor and spiral inductors for L-C band pass filter, a low insertion loss of L-C passive components can be realized with a minimized chip area. The insertion loss was 3 dB for a 1.8 GHz filter, and 5 dB for a 900 MHz filter. This paper also discusses a analysis and practical design to thin-film L-C band pass filter.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.261-266
• /
• 2015

The capacity of passive metal to repassivate after film damage determines the development of local corrosion and the resistance to corrosion failures. In this work, the repassivation kinetics of 316L stainless steel (316L SS) was investigated in borate buffer solution (pH 9.1) using a novel abrading electrode technique. The repassivation kinetics was analyzed in terms of the current density flowing from freshly bare 316L SS surface as measured by a potentiostatic method. During the early phase of decay (t < 2 s), according to the Avrami kinetics-based film growth model, the transient current was separated into anodic dissolution ($i_{diss}$) and film formation ($i_{film}$) components and analyzed individually. The film reformation rate and thickness were compared according to applied potential. Anodic dissolution initially dominated the repassivation for a short time, and the amount of dissolution increased with increasing applied potential in the passive region. Film growth at higher potentials occurred more rapidly compared to at lower potentials. Increasing the applied potential from 0 $V_{SCE}$ to 0.8 $V_{SCE}$ resulted in a thicker passive film (0.12 to 0.52 nm). If the oxide monolayer covered the entire bare surface (${\theta}=1$), the electric field strength through the thin passive film reached $1.6{\times}10^7V/cm$.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.273-279
• /
• 2015

Effects of passive film quality by chemical passivation and solution flow on the corrosion behavior of 304 stainless steel in HCl solution were investigated using a coloration indicator, and by corrosion weight loss, electrochemical polarization and element dissolution measurements. A high redness degree suggests a low passive-film integrity for 304 stainless steel following air exposure, while the minimum redness degree for the samples after chemical passivation suggests a high passive-film integrity. In the static condition, samples subjected to air exposure exhibited a high corrosion rate and preferential dissolution of Fe. Chemical passivation inhibited the corrosion rate due to the intrinsically high structural integrity of the passive film and high concentrations of Cr-rich oxides and hydroxide. Solution flow accelerated corrosion by promoting both the anodic dissolution reaction and the cathodic reaction. Solution flow also altered the preferential dissolution to fast uniform dissolution of metal elements.

• Bulletin of the Korean Chemical Society
• /
• 제22권5호
• /
• pp.481-487
• /
• 2001

Surface films formed prior to bulk reduction of lithium have been studied at gold, platinum, and copper electrodes in rigorously dried propylene carbonate solutions using electrochemical quartz crystal microbalance (EQCM) and secondary ion mass spectrometry experiments. The results indicate that the passive film formation takes place at a potential as positive as about 2.0 V vs. Li/Li+ , and the passive film thus formed in this potential region is thicker than a monolayer. Quantitative analysis of the EQCM results indicates that electrogenerated lithium reacts with solvent molecules to produce a passive film consisting of lithium carbonate and other compounds of larger molecular weights. The presence of lithium carbonate is verified by SIMS, whereas the lithium compounds of low molecular weights, including lithium hydroxide and oxide, are not detected. Further lithium reduction takes place underneath the passive film at potentials lower than 1.2 V with a voltammetric current peak at about 0.6 V.

• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.214-216
• /
• 1995

Passive films formed on chromium surface in citrate buffer solution were investigated by means of three-parameter ellipsometry. The citrate buffer was found to be a suitable medium in which oxide film on chromium could be removed by cathodic treatment, providing a reference surface for the optical study. The passive film effectively protecting the chromium surface from corrosion was found to have thicknesses in the range 0.65 to 1.25 nm depending on the potential in the range of -0.20 to 0.60 V (0.1M KCl calomel electrode). The complex refractive index of the passive film did not show significant potential-dependent changes, indicating that the composition of the film material does not depend on potential.

• Nuclear Engineering and Technology
• /
• 제32권6호
• /
• pp.595-604
• /
• 2000

Flow-Accelerated Corrosion Behavior of SA106 Gr.C steel in room temperature alkaline solution simulating the CANDU primary water condition was studied using Rotating Cylinder Electrode. Systems of RCE were set up and electrochemical parameters were applied at various rotating speeds. Corrosion current density decreased up to pH 10.4 then it increased rapidly at higher pH. This is due to the increasing tendency of cathodic and anodic exchange half-cell current. Corrosion potential shifted slightly upward with rotating velocity. Passive film was formed from pH 9.8 by the mechanism of step oxidation and the subsequent precipitation of ferrous species into hydroxyl compound. Above pH 10.4, the film formation process was active and the film became stable. Corrosion current density showed increment in pH 6.98 with the rotating velocity, while it soon saturated from 1000 rpm above pH 9.8. This seems that activation process which represents formation of passive film on the bare metal surface controls the entire corrosion process

• 한국식품저장유통학회지
• /
• 제20권3호
• /
• pp.317-322
• /
• 2013

전처리 유무와 포장방법에 따른 건조복숭아를 가속실험($40^{\circ}C$, 50일)하여 품질변화를 조사한 결과 중량 및 pH의 변화는 vitamin C 처리가 무처리에 비해 낮았으며, 충진방법에 따라서는 전반적으로 vacuum 처리가 passive 및 $N_2$ 처리방법에 비해 낮았다. 가용성고형분 함량은 polyethylene film에서 높았고, vacuum 처리가 passive 및 $N_2$ 처리방법에 비하여 높은 함량을 나타내었다. 적정산도의 경우는 OPP/Al/PE film이 polyethylene film다 높은 반면 vitamin C 처리 시 포장 재질 간에 유의한 수준의 값을 나타내어 vitamin C 처리가 저장 중에 온도에 의한 산의 손실을 억제하는 것으로 관찰되었다. 충진 방법에 따라서는 전반적으로 vacuum 및 $N_2$ 처리방법이 passive에 비해 높은 적정산도 값을 나타내었고, 식미와 관계가 있는 당산비에서는 vacuum 처리방법이 높은 값을 나타내었다. 색도의 변화는 전반적으로 vitamin C 처리가 무처리에 비해 낮은 변화를 보였으며 L 값, delta E 값 및 갈변도의 결과 OPP/Al/PE film 포장방법 및 vacuum 처리에서 갈변현상이 억제되는 것으로 관찰되었다. 전처리 방법에 따른 폴리페놀 및 플라보노이드 함량은 vitamin C 처리가 무처리에 비해 높은 함량을 나타내었으며, 포장재질에 따라서는 polyethylene film에 비하여 OPP/Al/PE film이 유의적으로 높은 함량을 나타내었다. 이상의 결과 무처리군의 passive 포장법에서는 갈변 및 품질열화현상이 높은 것으로 관찰되었으나 vitamin C 처리군의 vacuum-OPP/Al/PE film 포장은 갈변화 및 품질손상이 적게 관찰되어 품질유지 및 유통기간 연장을 위한 적정포장 방법이 될 것으로 사료된다.

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.7-11
• /
• 2003

Photoelectrochemical response and electrochemical impedance behavior was investigated for passive film formed on sputter-deposited Cr alloy in $0.1kmol{\cdot}m^{-3}$. Photoelectrochemical action spectrum could be separated into two components, which were considered to be derived from $Cr_2O_3$ ($E_g\sim3.6eV$) and $ Cr(OH)_3 $ ($E_g\sim2.5eV$). The band gap energy, $E_g$, of each component was almost constant for various applied potentials. polarization periods and alloying additives. The photoelectrochemical response showed negative photo current for most potentials in the passive region. Therefore, the photo current apparently exhibited p-typesemiconductor behavior. On the other hand, Mort-Schottky plot of the capacitance showed positive slope, which means that passive film formed on Cr alloy has n-type semiconductor property. These apparently conflicting results are rationally explained assuming that the passive film on Cr alloy formed in the acid solution has n-type semiconductor property with a fairly deep donor level in the band gap and forms an accumulation layer in the most of potential region in the passive state.

• Corrosion Science and Technology
• /
• 제6권1호
• /
• pp.7-11
• /
• 2007

In this study, new evaluation method for the stability and corrosion resistance properties of passive films has been suggested by means of observation of self-activation process in open-circuit state and galvanostatic nanoscale reduction test. The experiments were performed for air-formed oxide film in case of plain carbon steel, and for anodically passivated films formed in aqueous sulfuric acid solutions in case of titanium and 304 stainless steel. From these experimental results, we derived two parameters, $i_{0}$ and $q_{0}$, which characterize the self-activation process and the properties of passive film on a stainless steel surface. The parameter $i_{0}$ was defined as the rate of self-activation, and $q_{0}$, the reduced amount of charge during the self-activation process. In conclusion, it is considered that the stability and corrosion resistance of passive metals and alloys can be evaluated quantitatively by three parameters of $\tau_{0}$, $q_{0}$, and $i_{0}$, which easily obtain by means of observing the self-activation process and galvanostatic nanoscale reduction test.