• 한국소음진동공학회논문집
• /
• 제22권6호
• /
• pp.535-541
• /
• 2012

The three-down one-up method which is commonly used in the field of psychophysics is employed in this study that is to reveal how much magnitude of vibration makes discomfort in passenger vehicle on idle condition. Thirteen taxi drivers were invited for subject of the experiment where they evaluated the controlled vibrations on rigid seat in terms of idle vibration on passenger vehicle at frequency range from 15 Hz to 40 Hz. As the result, vibration of 100~105 dB is marginal range to make discomfort on passenger seat. Frequency dependency of the discomfort was found at the frequency range, which is the higher frequency the lower discomfort with the same magnitude of vibration. The frequency dependency found here was compared with ISO 2631-1 that is more sensitive at the frequency range.

• 한국소음진동공학회논문집
• /
• 제24권6호
• /
• pp.444-451
• /
• 2014

The signal patterns of slosh noise produced by the fuel tank of a passenger vehicle are characterized by analyzing vehicle interior noise, fuel tank vibration, and near-field noise radiated from the fuel tank. This paper also shows the noise transfer path analysis results performed from the fuel tank to the vehicle inside. On top of them, physical index is described, demonstrating a good correlation with subjective feeling of slosh noise. It is essential to identify the main noise transfer paths for redesigning of the fuel tank system aiming at reducing slosh noise and also helpful to apply physical index in evaluating and reducing this noise. It is found that structure-borne path is the main root of slosh noise and a value reveals a good correlation with subjective feeling.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.22-28
• /
• 2011

This paper presents an active roll motion control of a passenger vehicle. The roll controller is designed in the framework of $H_{\infty}$ control scheme based on the 3 DOF vehicle model taking into consideration parameter variations, which affect the roll dynamics, and unmodeled high frequency dynamics for robustness and performance. In order to investigate the feasibility of the active roll control system in a car, its performance is evaluated by simulation in a full vehicle model with nonlinear tire characteristics under various operating conditions. Finally, in order to enhance the performance in a transient region taking into account the limited bandwidth of the actuating module, a hybrid control strategy is presented.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.222-229
• /
• 2009

A noble infrared sensor was studied for passenger conditional detection in vehicle, This research relates to uncooled infrared sensors for detecting the presence, type and temperature of occupants in vehicle. It sense that the occupants purpose to control the smart airbag for safety in the case of adult or child and to control the automatic air conditioning for convenience. This paper described the design and the fabrication of microbolometers which were composed of 2 by 8 elements using the surface micromachining technology. The characteristics of the array were investigated in the spectral region of $8{\sim}12{\mu}m$. The fabricated detectors exhibited the thermal mass of $7.05{\times}10^{-9}\;J/K$, the thermal conductance of $1.03{\times}10^{-6}\;W/K$, the thermal time constant of 6.8 ms, the responsivity of $2.96{\times}10^4\;V/W$ and the detectivity of $1.01{\times}10^9\;cmHz^{1/2}/W$, at the chopper frequency of 10 Hz and the bias current of $4.4{\mu}A$. We could successfully detect the human body condition in the divided zone. As a results, we concluded that microbolometer optimized in this research could be useful for the application of passenger conditional detection in vehicle.

• Environmental Engineering Research
• /
• 제14권3호
• /
• pp.180-185
• /
• 2009

Only limited information is available as regards to the exposure levels of naphthalene (polycyclic aromatic hydrocarbons, PAHs) and monocyclic aromatic hydrocarbons(MAHs) in the interiors of diesel-fueled passenger cars, while many studies investigated the exposure levels of various volatile organic compounds(VOCs) in the interiors of gasoline-fueled passenger cars or public buses. Present study was performed to supplement this deficiency by measuring naphthalene (as a representative of PAHs) and MAHs levels inside five diesel-fueled and five gasoline-fueled passenger cars while morning and evening commuting on real roadways. Each car was surveyed five times on different sampling days. The in-vehicle naphthalene levels were higher for the diesel-fueled cars as compared to gasoline-fueled cars, whereas the results were reversed for the in-vehicle MAH levels. The median cabin levels of diesel-fueled cars were 1.3, 7, 13, 4, and 6 ${\mu}g/m^3$ for naphthalene, benzene, toluene, ethyl benzene, and m,pxylene, respectively. With respect to gasoline-fueled cars, their respective levels were 0.7, 11, 21, 7, and 9 ${\mu}g/m^3$ . The median MAHs concentration ratios of gasoline-fueled cars to diesel-fueled cars ranged from 1.50 to 1.75, while the median naphthalene concentration ratio was estimated to be 0.54. In addition, there was no significant difference of both naphthalene and MAHs between the diesel-fueled cars, but the in-vehicle levels were significantly different between gasoline-fueled cars. The concentration levels of both naphthalene and MAHs were higher in the passenger cars than other non-industrial microenvironments. Consequently, it was confirmed that the cabins of both diesel-fueled and gasoline-fueled passenger cars are an important microenvironment associated with the exposure to naphthalene and MAHs.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.816-822
• /
• 2010

A comprehensive review for the selection of urban rail vehicle systems that best suit Gimpo railway line is taking place with consideration of the project area characteristics in light of line planning, passenger demand, supply of rolling stock, and railway construction and operation. Various aspects of vehicle systems including passenger demand on concerned lines, regional characteristics, vehicle types, and railway construction and operational settings should be taken into consideration. In addition, request for the introduction of customized vehicle systems reflecting the convenience of transit users such as wide and hospitable inner space, low noise, flexible operation of 2 to 4 car train-set and eye catching slim bridge piers is increasing. A study on alternatives to place an order to opt for optimum rolling stock systems considering line characteristics of Gimpo City's urban railway and future passenger demand while meeting the needs of Gimpo City has been conducted.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.38-45
• /
• 1996

Power steering systems play an important role for the vehicle handling characteristics and driver's steering center feeling during straightforward driving situation. In this paper, the rotary valve, the main component of power steering systems, is modeled and analyzed, and is combined with a 3-DOF(degree of freedom) lateral dynamics model of passenger cars to examine the effects of design parameters on the vehicle steering characteristics. The results can be applied to the development of advanced power steering systems for passenger cars such as electronically-con-trolled power steering system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.821-822
• /
• 2007

• 한국분무공학회지
• /
• 제22권4호
• /
• pp.185-189
• /
• 2017

In Korea, sales of passenger cars using diesel and LPG fuels were continuously increased in recent years. From now on 2030, the registrated vehicles will close in about twenty five million in Korea. From these reason, Investigation on the comparison of exhaust emission characteristics of passenger cars using LPG and Diesel fuel in variation of driving mode and ambient conditions were conducted in this study. Exhaust emission characteristics of test vehicles were measured and analyzed by using chassis dynamometer and emission analyzer. Also, test vehicles were selected on the diesel vehicle with 1.7L engine and LPG vehicle with 2.0L engine. In order to study on emission characteristics according to driving cycles, CVS-75, NEDC, US06, SC03, Cold-FTP and HWFET were applied and the test conditions were set up the cases of A/C on and hot start. From these results, it is revealed that the NOx emission of diesel vehicle was higher than that of LPG vehicle and the case of CO emission shows the opposite patterns. In the HC emission, the emission increasing patterns not showed but the NOx emission of diesel vehicle and CO emission of LPG vehicle were showed the variation patterns according to the various driving modes.

• 센서학회지
• /
• 제18권5호
• /
• pp.385-392
• /
• 2009

This paper describes the algorithm development of a new body pressure detection sensor for occupant classification system. U.S. Government has required that advanced airbag system should be installed to every automobiles after 2006 according to FMVSS 208 regulation. Therefore, Occupant Classification System should be provided the passenger with safety in order to protect the infants or children that sit in the front passenger seat. When an occupant sits on the chair of the vehicle, deployment of the airbag depends on passenger's weigh distribution and postures. Authors have been developed a new pattern recognition of passenger and weight distribution at the same time by Force Sensing Resistor for the safety.