• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.63-68
• /
• 2004

There are a lot of manholes such as for water supply, sewage, telecommunication cable, traffic sign, electricity supply, and rainwater, etc. Conventional manholes installed on a road are impossible to adjust height, so that they should be entirely excavated to reinstall or repair. This entire excavation of a manhole causes too much time-consuming work, waste of resources, and obstruction of traffic. In this study, in order to solve the above mentioned problems, a cover, outer and inner parts of a manhole are integrated by gear-shaped parts located between outer and inner parts of a manhole. Mechanical design is performed to determine dimension of gear-shaped parts by Taguchi orthogonal array table. Cast molds for a gear-shaped manhole are also manufactured.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.710-715
• /
• 2004

There are a lot of manholes such as for water supply, sewage, telecommunication cable, traffic sign, electricity supply, and rainwater, etc. Conventional manholes installed on a road are impossible to adjust height, so that they should be entirely excavated to reinstall or repair. This entire excavation of a manhole causes too much time-consuming work, waste of resources, and obstruction of traffic. In this study, in order to solve the above mentioned problems, a cover, outer and inner parts of a manhole are integrated by gear-shaped parts located between outer and inner parts of a manhole. Mechanical design is performed to determine dimension of gear-shaped parts by Taguchi orthogonal array table. Cast molds for a gear-shaped manhole are also manufactured.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.1
• /
• pp.110-117
• /
• 2015

Spare part management is very important to products that have large number of parts and long lifecycle such as automobile and aircraft. Supply chain must support immediate procurement for repair. However, it is not easy to handle spare parts efficiently due to huge stock keeping units. Qualified forecasting is the basis for the supply chain to achieve the goal. In this paper, we propose an agent based modeling approach that can deal with various factors simultaneously without mathematical modeling. Simulation results show that the proposed method is reasonable to describe demand generation process, and consequently, to forecast demand of spare parts in long-term perspective.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1258-1261
• /
• 2003

Oil supply system is one of the most important part of Turbine. Lubricating oil of bearings supplied by oil pump. Failure of Oil supply pump critical damaged parts of Turbine, especially bearings. In this paper we have discussed the serious damage of turbine bearings due to failure of Oil supply pump.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.125-131
• /
• 2002

In Currently, the domestic reuse rate of ELV parts is about 3%. The reason of the row rate of it is due to that consumer can not obtain the information of the needed ELV parts. In order to supply the needed information to consumer, the standard of the part classification of the ELV parts is required. This research is to develop the part classification system of the three digits and web site of ELV parts.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.10-20
• /
• 2017

The proportion of software in the automotive industry is steadily increasing due to the rapid technological development of automobile E/E parts. Because the automotive E/E technology is now on the basis of intelligent automobile and advanced safety automobile technology. The purpose of this study is to investigate the effect of organizational capability (organizational resource capability and management capability), process capability (process capability, customer Requirement management capability), performance dimension (motivation, participation level). In this study, we conducted questionnaires and statistical analysis on engineers (members of the Korea Advanced Automotive Technology Association) who perform research and development activities in the R&D organization of the automotive E/E part in South Korea. ANOVA is applied for the verification of the difference in performance measured by organizational capability, process maturity, and motivation participation level according to company characteristics (level of processing : supply chain configuration, annual sales, total SW development ratio). According to the results of this study, in order to improve the performance of ASPICE or ISO 26262-related consulting project, a different consulting approach strategy considering the characteristics of organization and personnel is needed. In summary, the analysis results for the three main treatment levels are as follows. The difference in organizational capacity, process capability and performance was found to be statistically significant according to supply chain configuration and annual sales, but it was found that the difference of response according to the proportion of total SW was not significant.

• Korean Journal of Metals and Materials
• /
• v.46 no.4
• /
• pp.241-248
• /
• 2008

Gas turbine blades serviced for a period are usually repaired for reuse via "rejuvenation processes" including fluoride ion cleaning, brazing or welding, and recoating. Among these processes, the welding process is applied to rebuilt damaged parts of the blade in which welding materials being mostly Ni base superalloy are supplied in the form of powder or wire. When powder is used in the welding process, the uniform supply of powder is a very important factor for the uniformity of welding. According to our experience, the uniformity was very poor with the powder supply system only utilizing pressurized air flow. A new powder supply system was developed in which powder is supplied via air flow and simultaneously mechanically. The welding uniformity was much improved with this new system. In this study, the microstructure and mechanical properties of welded parts obtained from several kinds of powder using the new powder supply system were characterized.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.155-166
• /
• 2023

Through COVID-19, the importance of supply chain management of raw material minerals has been maximized. In particular, supply chain management is important for rare metals, which are difficult to manage demand and supply, in order to secure raw materials for the parts and materials industry that Korea is actively promoting. In this study, a system was established and evaluated to select Critical minerals that need to respond to Korea's industrial structure and global risks by quantifying tangible and intangible risk factors. Global Supply Concentration, Supplying country risk, Policy Social Environment Regulation, Domestic Import Instability, Risk responsiveness, Market Scale, Demand Fluctuation and Economic Importance were evaluated as evaluation indicators. The degree of risk and risk impact were quantitatively measured using the criticality matrix-criticality level. After evaluating 40 types of minerals used in domestic new growth businesses, 15 types of Critical minerals(Li, Pt, Co, V, REE, Mg, Mo, Cr, Ti, W, C, Ni, Al, Mn, Si) in Korea were selected. The results are expected to be used to establish policies to strengthen resource security and to make decisions to form a company's raw material portfolio.

• International Journal of Quality Innovation
• /
• v.4 no.1
• /
• pp.213-219
• /
• 2003

This paper proposes an efficient and effective BOM management scheme for small and medium manufacturing (SME) companies that produce automobile parts. Automobile part's manufacturers produce very various products due to various automobile characteristics such as types, colors, and options of cars. These products are classified into product groups with common parts and like this product groups with commonality are regarded as product family. This paper proposes a BOM data model for product family structures and implements the practical EXCEL-based BOM management system for real small and medium manufacturing (SU) companies that produces automobile parts.

• Journal of the Korean Geographical Society
• /
• v.50 no.6
• /
• pp.621-639
• /
• 2015

The aim of this study is to consider the physical distribution system of assembly supplied from $1^{st}$ supplier and module corporation to automobile assembly plant through analysis of existing literatures and interview survey. The major findings of this study are as follows. Parts supply of automobile are to bind together with many regional parts supplier than using multi frequency and small delivery of JIT. Regional physical distribution center of joint parts and integrated physical distribution information center is to be installed in neighboring region of automobile assembly plant in order to reduce the transport cost by designating and activating multiple physical distribution and transport companies in each automobile assembly plant and turning into effective high volume shipping system.