• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.296-301
• /
• 1989

As a cornerstone of assembly automation, the automatic part feeders are used to feed the various kind of the parts to the assembly workstation in the desired order and fashion. In this paper, EXPERT SYSTEM consisting of the data base for the feeding functions and part properties plus the rule base for the selection of feeder types is developed. The symbolic data of the part properties are used as basic factors in the selection rule of the suitable feeder types.

• 전기의세계
• /
• 제22권6호
• /
• pp.8-18
• /
• 1973

This paper is a part from the series study on the 22.9KVY multiground destribution system and its is divided into three parts as follow. A.C. Network Analyzer study on the load current flow when one phase line of the feeder is out of seroice because of cutting. A.C. Network Analyzer study on the increasing zero sequence current in the good feeders when one feeder is under fault of single phase short. Field test report of the common use of open telephone line on same poles of 22.9KVY distribution system.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.124-133
• /
• 2017

In the current lighting market, LEDs that have a high luminous efficiency, a long life and consume less power have emerged as next generation lighting. Owing to various designs and sizes of LEDs, the production process of existing LEDs involves many tasks that require manual labor; hence, the assembly of LEDs necessitates manpower. Because of the use of manpower, the production costs of LEDs increases and production efficiency decreases. Recently, the assembly parts of LEDs have been standardized for minimizing manual labor, and an LED is developed as an LED panel. The automatic assembly system produces LED convergent lighting by assembling two LED panels and one diffusion cover. To increase the production efficiency of the LED convergent lighting module, it is important that the development of a feeder can continuously supply the LED panels is required, and whose design has sufficient stability. The automatic assembly system of the LED convergent lighting module consists of two feeders, which convey LED panels and diffusion covers to a main conveyor, which assembles the lifted panels and covers. In this study, structural analysis and fatigue life for forced loads on the conveyer line of the feeder in the process of lifting LED panels and diffusion covers of each feeder, is analyzed. In addition, the drive of the belt constituting the conveyor line of each feeder is simulated, and the dynamic characteristics of the belt is analyzed using the virtual engineering method.

• 한국경영과학회지
• /
• 제19권1호
• /
• pp.1-16
• /
• 1994

In this paper, we try to raise the efficiency of PCB production by improving automated inserting process. This process is composed of part inserting sequence and feeder allocation problem. Until now, this problem is formulated by Traveling Salesman Problem (TSP) or Rural Postman Problem. They concerted more on parts(chips) inserting. But in this paper, we concentrate on Feeder. We formulate 0-1 Integer program (MP2) easier than TSP. This program can be solved by using LP Package (i. e. LINDO, GAMS etc). We propose Heuristic algorithm ISFA which guarantees a local optimum and often gives solution. We give some examples to prove ISFA algorithm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.1019-1020
• /
• 2006

The proposed algorithm consists of two parts. One is to set up a decision tree to represent the various switching operations available. Another is to identify the most effective the set of switches using proposed search technique and a feeder load balance index. Test results on the KEPCO's 108 bus distribution system show that the performance is efficient and robust

• 한국인터넷방송통신학회논문지
• /
• 제22권4호
• /
• pp.35-40
• /
• 2022

본 논문은 전자제품의 PCB 기판 외곽에 위치시켜 ISM 대역에서 무선통신이 가능하도록 하는 안테나를 제안하였다. PCB에서는 부품의 간섭 또는 디자인에 방해가 되지 않도록 소형화하기 위해 T자형 OPEN - STUB 급전선을 설계하였다. T자형 스터브 급전선과 스파이럴 구조를 이용하여 각각 2.4GHz, 5.8GHz 대역에서 안테나의 특성을 확인하였다. 실험을 위하여 안테나 크기는 가로 5mm × 세로 6.5mm의 크기로 하였으며 PCB두께는 1.2T로 하여 제작하였다. 제작된 안테나의 실험 측정결과 2.4GHz, 5.8GHz에서 -10dB 이상의 반사손실을 얻을 수 있었다. 또한 E-plane에서 이득은 -4.45dBi로 나타났으며, H-plane에서 이득은 -1.05dBi 나타났다. 따라서 여기서 제안된 무선통신용 소형안테나에서 우수한 성능을 나타내었다.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.173-176
• /
• 2012

본 논문에서는 평판형 방사소자를 이용한 새로운 원형편파용 혼 안테나를 제안한다. 본 안테나는 평판형 마이크로스트립 안테나와 구형 혼으로 구성되며, 혼 내부에 삽입되는 마이크로스트립 안테나는 혼에 전력신호를 여기하는 급전부이자 편파기로서 동작한다. 또한, 마이크로스트립 안테나는 고이득, 높은 고립도 특성과 함께 광대역을 구현하기 위하여 금속 스페이서를 삽입한 적층형 구조로 설계되었다. 제안된 구조를 통하여, 혼 안테나는 급전부와 편파기와 같은 부가적인 구조를 별도로 설계하지 않음으로써 안테나의 소형화를 도모할 수 있다. 제안된 안테나는 8.6dBi의 이득과 4.8%의 3-dB 축비 대역폭을 가지며, 특히, 높은 대역에서 원형편파로 동작되는 이동통신 및 위성통신 분야의 다양한 안테나 시스템에 적용될 수 있다.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.63-68
• /
• 2006

This research presents the reliability analysis of the pneumatic actuator within the tape feeder that is used to transfer the correct force to linked parts during l.0E+7 cycles. First, the degradation analysis for thrust and air leakage is executed to obtain the failure data of a product based on its performance over time. Second, once the parameters has been calculated using the weibull 2-parameter distribution and MLE(Maximum Likelihood Estimation), information related to life such as reliability, failure rate, probability density function is estimated. Finally, MTTF(Mean Time To Failure) and $B_{10}$ life of actuators are calculated. MTTF means the mean life at the confidence level and $B_{10}$ life refers to the time by which 10% of the product would fail. In this study, failure causes and solutions are examined using the reliability analysis.

• 한국정보통신학회논문지
• /
• 제8권3호
• /
• pp.535-540
• /
• 2004

본 논문에서는 CPW급전을 이용한 직사격형 슬롯안테나를 설계 방법에 대해 기술하였다. CPW 급전을 이용한 슬롯안테나는 간단한 구조를 가지고, 능동소자에 집적이 용이하다. 논문에 제시한 안테나는 다중 공진을 이용하여 광대역을 실현하고자 안테나의 구성을 내부패치안테나와 외부패치안테나 두 부분으로 하였다. 또한 안테나의 파라미터 변화와 내부패치 안테나의 위치 및 크기를 변화함으로써 다중공진안테나의 특성을 확인하였다. 제시된 안테나의 각각의 공진주파수 실험 결과치는 1,9GHz, 2.8GHz, 3,5GHz, 4,9GHz로 측정되었다. 각각의 공진주파수의 방사패턴에서 네 번째 공진주파수의 방사패턴이 TM11모드로 나타나므로 실제 제시한 직사각형 슬롯안테나는 3중공진주파수로 나타나는 것을 확인하였다.

• The Korean Journal of Ecology
• /
• 제8권3호
• /
• pp.153-161
• /
• 1985

Energy flow through the trophic levels was studied at a salt marsh ecosystem distinguished into low and high marsh. Gross primary productions of Suaedeto-Salicornietum and Artemisieto-Limonietum at low marsh were 8, 299 and 13, 154kca/$m^2$/yr, and those of Calama-grostetum and Sonchuso-Setaetum at high marsh were 17, 899 and 15, 177kca/$m^2$/yr, respectively. Efficiencies of solar energy utilization of plants were 1.7 and 2.6% at the former, and were 3.6 and 3.2% at the latter. Of gross productions, net primary productions were 3, 977 and 5, 280kca/m2/yr at low marsh and were 6, 354 and 5, 329kca/$m^2$/yr at high marsh, and the remainder, 52~67%, was consumed by respiration of plants. A small amount (0.03~0.04%) of the net primary production was flowed through grazing food chain and most amout was transferred into dead parts. Of dead parts, 40% was accuulated as litter and the rest was decomposed into detritus. In the detritus food chain, a little energy was utilized by detritus feeder, and a major by microorganism. The amounts of energy flowed through grazing and detritus feeders at high marsh were much more than those at low marsh, but tertary production as spider was Vice versa.