• 한국의상디자인학회지
• /
• 제7권1호
• /
• pp.33-40
• /
• 2005

Gathering is method used to control fullness along a seam line. The purpose of this study was to investigate the relationship between the quantitative research and qualitative method; the effect of gather and the types of gather drape. The experimental design consists of four factors: (l) three kinds of different weight and thickness of fabrics (2) three kinds of stitch densities (3) five kinds of ratio of gathers (4) three kinds of grain directions. Therefore one hundred thirty five (135) samples were made. And utilized SPSS WIN 10.0 Package in data analysis. The results of this study were as follows; First, after frequency analysis, side height, hem line width, node depth, node count, node width accorded with these result data recording. Second, after correlation analysis, side height related with front statements. Side height and entire visual was negative correlation. Hem line width, node depth, node count with section statements was negative correlation but node width at section statements was positive correlation. Third, after $k^2$ analysis, front picture parts getting excellent evaluation were 1st side height, 3rd hem line width, 4th node depth, 3rd node count, 3rd node width. And section illustration parts getting excellent evaluation were 4th side height, 1st hem line width, 2nd node depth, 3rd node count, 4th node width.

• Journal of Astronomy and Space Sciences
• /
• 제36권2호
• /
• pp.69-74
• /
• 2019

Spacecraft requires sufficient power in orbit to perform its mission. So as to comply with system requirements, the sufficient power should be made by a solar cell array by photovoltaic power conversion. A life time of space program depends on its mission considering parts reliability and parts grade. Based on the mission life time, power equipment might be designed to meet specifications. In outer space, solar cell array might generate the dc power by photovoltaic conversion effects and GaInP/GaAs/Ge solar cells are used in this study. Space programs that require more than five years should select parts for high reliability applications. Therefore, reliability analysis for high reliability applications should be performed to check its fulfilment of the requirements. This program should also require more five years for its mission and we performed its analysis using parts count method (PCM) for its reliability. Finally, we performed reliability analysis and obtained quantitative figures found out 99.9%. In this study, we presented the reliability analysis of the 300 W GaInP/GaAs/Ge solar cell array.

• 한국소음진동공학회논문집
• /
• 제13권1호
• /
• pp.33-39
• /
• 2003

Interior parts of a vehicle are getting important to reduce interior noise. Therefore, prior analysis of cabin noise related with interior parts are necessary at first design stage. Recently, Statistical Energy Analysis(SEA) has been suggested as a possible way for high frequency range noise analysis of interior parts. The validity of noise analysis with SEA to interior parts has been preyed by comparing with experimental result, and the developed method with SEA has been applied in finding optimized interior parts package.

• 한국입자에어로졸학회지
• /
• 제11권4호
• /
• pp.93-98
• /
• 2015

Particles which generated from plasma enhanced chemical vapor deposition (PECVD) during thin film deposition process can affect to the process yield. By using light extinction method, ISPM can measure particles in the large-diameter pipe (${\leq}300mm$). In our research, in-situ particle monitor (ISPM) sensor was installed at the 300 mm diameter exhaust-line to count the particles in each size. In-house flange for mounting the transmitting and receiving parts of ISPM was carefully designed and installed at a certain point of exhaust line where no plasma light affect to the light extinction measurement. Measurement results of trend changes on particle count in each size can confirm that ISPM is suitable for real-time monitoring of vacuum process.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.94-102
• /
• 2002

위성은 일단 한번 발사하고 나면 운용궤도상에서 수리 및 회수가 거의 불가능하기 때문에 위성에 들어가는 모든 개발 부품들은 완벽한 설계, 충분한 해석, 고 작업도의 제작, 그리고 다양한 시험을 수반하여 충분한 검증을 받게 된다. 그럼에도 불구하고 실패가 일어날 수 있으며, 이러한 실패에 대비하기 위해 여분의 부품을 탑재하여 일부 부품의 실패에도 불구하고 정상적인 작동을 할 수 있도록 설계한다. 본 논문에서는 현재 전자통신연구원에서 개발중인 통신방송위성의 중계기에 대한 신뢰도 분석과 함께 어떠한 방법을 이용하여 여분의 부품을 구성하는 것이 신뢰도 측면에서 최적화되는 설계인지 분석하였다. 이를 위하여 여러 가지 여분의 부품을 구성하는 방법 및 각각의 경우에 대한 결과를 비교하였다.

• 한국정보기술학회 영문논문지
• /
• 제10권1호
• /
• pp.71-83
• /
• 2020

In this paper, we propose a system that can detect the shape of a hand at high speed using an FPGA. The hand-shape detection system is designed using Verilog HDL, a hardware language that can process in parallel instead of sequentially running C++ because real-time processing is important. There are several methods for hand gesture recognition, but the image processing method is used. Since the human eye is sensitive to brightness, the YCbCr color model was selected among various color expression methods to obtain a result that is less affected by lighting. For the CbCr elements, only the components corresponding to the skin color are filtered out from the input image by utilizing the restriction conditions. In order to increase the speed of object recognition, a median filter that removes noise present in the input image is used, and this filter is designed to allow comparison of values and extraction of intermediate values at the same time to reduce the amount of computation. For parallel processing, it is designed to locate the centerline of the hand during scanning and sorting the stored data. The line with the highest count is selected as the center line of the hand, and the size of the hand is determined based on the count, and the hand and arm parts are separated. The designed hardware circuit satisfied the target operating frequency and the number of gates.

• 한국멀티미디어학회논문지
• /
• 제16권5호
• /
• pp.566-576
• /
• 2013

In Home Area Network (HAN) of the smart grid, Power Line Communication (PLC) technology and ZigBee communication technology can be used in the communication among the Advanced Metering Infrastructure (AMI) devices. However, according to performance evaluation results of the PLC technology, we find that using the PLC technology is unsuitable for the remote meter reading service. It is worth noting that some parts of the PLC are converted to the ZigBee communication technology in Jeju, Korea. Compared with PLC, ZigBee has no restriction of the place, where the equipments can be freely set up, due to the advantage of radio communication. However, number of usable devices will impact the network performance which is depended on the address assignment. In addition, due to the restriction of transmission range among devices, it is difficult to apply the ZigBee address assignment method to the practical circumstance. In this paper, we examine the previous ZigBee address assignment schemes and the corresponding routing algorithms, and propose a novel address assignment scheme compared with the existing methods, the performance of the proposed one is improved. In particular, evaluation results show that the proposed scheme reduces the average number of hop count, the transfer time and the processing time.

• International Journal of Knowledge Content Development & Technology
• /
• 제13권4호
• /
• pp.39-49
• /
• 2023

This research investigates the availability of information resources for visually impaired students in University libraries in Nigeria; a tool for inclusive University education. A Descriptive survey research design was adopted for the study and a total number of 20 University libraries took parts in the study. A self-constructed online questionnaire was designed and distributed to collect the data from respondents (librarians) using a simple random sampling technique. A total of 45 respondents filled out the online questionnaire, but 40 were valid and useful for analysis. The use of frequency count and percentages method of data analysis was adopted for this research work. The study reveals that most of the University libraries lacked information resources for visually impaired students, it was found that the inclusion of information resources for visually impaired persons will promote inclusive education and librarians' skills. The challenges hindering the availability of information resources to the visually impaired students are insufficient funds for maintenance, erratic power supply and inadequate skills by users, among others. Recommendations were made for the campaign for inclusive education and the provision of information resources for visually impaired students.

• 한국환경보건학회지
• /
• 제36권2호
• /
• pp.95-107
• /
• 2010

Hand-washing is one of the major factors in personal hygiene and public health. This study was undertaken to investigate the hygienic behavior of food-service employees, focusing on awareness of hand washing, hand washing practices, and the load of index microorganisms (aerobic plate count, total and fecal coliforms, Escherichia coli, and Staphylococcus aureus) on the hands of food-service employees. A questionnaire survey completed by direct interview, direct observation of restrooms by the researcher and trained observers, and microbiological examination according to the Food Code of Korea were carried out. In the survey, a positive attitude toward hand washing compliance was reported; however, improper hand washing and poor hand hygiene of the food-service employees were seen under direct observation. Significant differences (p<0.05) were found between the questionnaire survey and the direct observations in hand washing compliance after using the toilet, duration of hand washing, use of hand washing agents, use of hand washing tools, washing of different parts of the hands, hand-drying method, temperature of water, and method of turning off the water. Samples taken from employees' hands before washing showed higher levels of bacteria than those taken during work and/or after washing (p<0.05). Poor hand washing practices were indicated by the positive results for total and fecal coliforms, E. coli, and S. aureus on the hands of some food-service employees. This study showed that there is a marked difference between the food-service employees' awareness of hand-washing and their actual hand-washing practices. The poor hand hygiene of and improper hand washing by the food-service employees should be addressed for improved food safety.

• 전기전자학회논문지
• /
• 제28권2호
• /
• pp.150-157
• /
• 2024

본 논문은 딥러닝 기반 객체 탐지 모델과 다항 회귀모델을 이용하여 사과나무에 열린 사과의 개수를 예측할 수 있는 새로운 알고리즘을 제안한다. 사과나무에 열린 사과의 개수를 측정하면 사과 생산량을 예측할 수 있고, 농산물 재해 보험금 산정을 위한 손실을 평가하는 데에도 활용할 수 있다. 사과 착과량 측정을 위해 사과나무의 앞면과 뒷면을 촬영하였다. 촬영된 사진에서 사과를 식별하여 라벨링한 데이터 세트를 구축하였고, 이 데이터 세트를 활용하여 1단계 객체 탐지 방식의 CNN 모델을 학습시켰다. 그런데 사과나무에서 사과가 나뭇잎, 가지 등으로 가려진 경우 영상에 포착되지 않아 영상 인식 기반의 딥러닝 모델이 해당 사과를 인식하거나 추론하는 것이 어렵다. 이 문제를 해결하기 위해, 우리는 두 단계로 이루어진 추론 과정을 제안한다. 첫 번째 단계에서는 영상 기반 딥러닝 모델을 사용하여 사과나무의 양쪽에서 촬영한 사진에서 각각의 사과 개수를 측정한다. 두 번째 단계에서는 딥러닝 모델로 측정한 사과 개수의 합을 독립변수로, 사람이 실제로 과수원을 방문하여 카운트한 사과 개수를 종속변수로 설정하여 다항 회귀 분석을 수행한다. 본 논문에서 제안하는 2단계 추론 시스템의 성능 평가 결과, 각 사과나무에서 사과 개수를 측정하는 평균 정확도가 90.98%로 나타났다. 따라서 제안된 방법은 수작업으로 사과의 개수를 측정하는 데 드는 시간과 비용을 크게 절감할 수 있다. 또한, 이 방법은 딥러닝 기반 착과량 예측의 새로운 기반 기술로 관련 분야에서 널리 활용될 수 있을 것이다.