• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.97-107
• /
• 1998

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. Braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two sizes of brake discs in stop and hold braking modes. And Plasma spray coating technique was used to coat ceramic powder on the discs. In the test four commercial brake pads were coupled with discs. Ceramic coated discs had shown good stability in friction coefficient at high speed and high energy braking conditions. But they caused large pad mass wear loss compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc, it had shown fluctuating friction coefficient at high speed but a fittie pad mass wear loss compared with ceramic coated discs.

• YAKHAK HOEJI
• /
• v.27 no.2
• /
• pp.125-131
• /
• 1983

Whether ($AB_{w}$) may be neglected against ($A_{w}^{+}$) in the calculation of the extraction coefficient of ion-pairs was criticized by both experiments and theoretical consideration, where ($AB_{w}$) and ($A_{w}^{+}$) mean the molar concentration of ion-pair AB and cation $A^{+}$ in the aqueous phase. Ion-pair complexes were partitioned between phosphate buffer (pH 7.4) and n-octanol. Tetrabutylammonium, isopropamide and methylene blue were selected as cations and benzoic acid, p-toluenesulfonic acid, salicylic acid and taurodeoxycholic acid were selected as counter ions (anions). As a result, conventional methods which assume no existence of ($AB_{w}$) were proven to lack generality. The equation proposed in my earlier report was confirmed to be valid as a general method.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.557-564
• /
• 2000

This study is aimed to develop the adsorbent which can effectively remove toxic hydrophobic organic compounds from the aqueous phase. The emphasis was made to elucidate the adsolubilization behavior of sparingly soluble organic compounds (SSOCs) into the cetyltrimetylammonium bromide(CTAB) layer formed on anthracite by the partition coefficient. The amount of SSOCs removed from aqueous solution was increased with increase of the amount of CTAB coated on the surface and wich increase of SSOCs's hydrophobicity. With the surface-modified solid shown in above. chloroform and benzene at the initial concentration of $6{\times}10^{-4}M$ were removed over 95%. Experimentally determined partition coefficient($K_d$) values between organo-anthracite and organics were 4~25 times higher than theoretical $K_d$ values of same organics Organo-anthracite formed by the addition of the CTAB can effectively immobilize organic contaminants dissolved in landfill leachate and can also be applicable to wastewater treatment containing toxic hydrophobic organic compounds such as chloroform and benzene.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.1
• /
• pp.32-49
• /
• 1998

For estimation of regional myocardial blood flow with O-15 water PET, a few modifications considering partial volume effect based on single compartment model have been proposed. In this study, we attempted to quantify the degree of heterogeneity and to show the effect of tissue flow heterogeneity on partition coefficient(${\lambda}$) and to find the relation between perfusable tissue index(PTI) and ${\lambda}$ by computer simulation using two modified models. We simulated tissue curves for the regions with homogeneous and heterogeneous blood flow over a various flow range(0.2-4.0ml/g/min). Simulated heterogeneous tissue composed of 4 subregions of the same or different size of block which have different homogeneous flow and different degree of slope of distribution of blood flow. We measured the index representing heterogeneity of distribution of blood flow for each heterogeneous tissue by the constitution heterogeneity(CH). For model I, we assumed that tissue recovery coefficient ($F_{MME}$) was the product of partial volume effect($F_{MMF}$) and PTI. Using model I, PTI, flow, and $F_{MM}$ were estimated. For model II, we assumed that partition coefficient was another variable which could represent tissue characteristics of heterogeneity of flow distribution. Using model II, PTI, flow and ${\lambda}$ were estimated. For the simulated tissue with homogeneous flow, both models gave exactly the same estimates, of three parameters. For the simulated tissue with heterogeneous flow distribution, in model I, flow and $F_{MM}$ were correctly estimated as CH was increased moderately. In model II, flow and ${\lambda}$ were decreased curvi-linearly as CH was increased. The degree of underestimation of ${\lambda}$ obtained using model II, was correlated with CH. The degree of underestimation of flow was dependent on the degree of underestimation of ${\lambda}$. PTI was somewhat overestimated and did not change according to CH. We conclude that estimated ${\lambda}$ reflect the degree of tissue heterogeneity of flow distribution. We could use the degree of underestimation of ${\lambda}$ to find the characteristic heterogeneity of tissue flow and use ${\lambda}$ to recover the underestimated flow.

• Journal of Photoscience
• /
• v.3 no.1
• /
• pp.33-38
• /
• 1996

The effect of vesicular L-$\alpha$-phosphatidylcholine on the rate of formation of all-trans-N-retinylidene-n-butylamine (3) and on the regeneration kinetics of bacteriorhodopsin pigment from retinal and bacterio-opsin have been studied. An estimate of the relative positions of retinal and n-butylamine in the vesicles has been made by fluoresence quenching experiments. Partition coefficient of retinal and microviscosity of the retinal-binding region have also been determined. The results are discussed in terms of the nature of chemical interaction between retinal and amine in a lipid environment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.E1
• /
• pp.1-9
• /
• 2003

The soil concentrations of polychlorinated biphenyls (PCBs) were measured at 12 sites in Ansung, Kyonggi province, Korea. Correlation coefficient (r) between total PCBs and organic matter content (OM) was significant (r=0.562, p< 0.05). It suggests that organic matter may be a key factor of soil absorption of PCBs. The PCB concentrations of low chlorinated congeners with high vapor pressure were relatively abundant in air but high chlorinated congeners with low vapor pressure were mainly dominated by soil. The results indicated the influence of physicochemical properties of PCBs such as vapor pressure, octanol - air partition coefficient ( $K_{OA}$ ). The calculated soil/air fugacity quotients suggested that the soil may be a source of heavier molecular PCBs (>penta-CBs) to the atmosphere, where lighter molecular PCBs appear to be affected by a movement from air to soil, especially tetra-CBs. Therefore, PCB homologs with low vapor pressure might have been influenced by revolatilization from soil.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.731-739
• /
• 1998

The probabilistic relaxation(PR) scheme based on the conditional probability and probability space partition has the important property that when its compatibility coefficient matrix (CCM) has uniform components it can classify m-dimensional probabilistic distribution vectors into different classes. When consistency or inconsistency measures have been defined, the properties of PRs are completely determined by the compatibility coefficients among labels of labeled objects and influence weight among labeled objects. In this paper we study the properties of PR in which both compatibility coefficients and influence weights are uniform, and then a learning rule for such PR system is derived. Experiments have been performed to verify the effectiveness of the learning rule.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.4
• /
• pp.259-263
• /
• 2010

We measured and compared the partition coefficients and absorption levels of preservative phenoxyethanol (PE), antimicrobial ethylhexylglycerin (EG) and UV-filters widely used in cosmetic products and more specifically evaluated the relative absorption level of PE depending on various packaging materials. The resulting partition coefficients of 11 UV filters in relation to PE and EG displayed EG with a relatively higher partition coefficients. The partition coefficients of Tinsorb M and Solaveil CT434 were also high. Among the UV-filter ingredients with EG absorption levels exceeding 40 % were Gransil PSQ, UV Titan M 160 and Micro $TiO_2$ MT 100 TV, whereas Gransil PSQ and Scadder showed PE absorption levels above 40 %. In addition, we confirmed that PE had displayed an absorption level of 7 ~ 8 % as a result of 1 month-long exposure to packaging material polyoxymethylene. This extensive research illustrates the possibility of producing the most potent preservative contents based on studying the relative compatibility between UV-filters and preservatives and selecting the adequate preservatives to be used. Furthermore, preservative level can also decline with passage of time depending on the type of packaging material used.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.1
• /
• pp.21-28
• /
• 2003

Ketorolac tromethamine(KT) is a nonsteroidal agent with potent analgesic and moderate anti-inflammatory activity. The lipid-water partition coefficient of KT was evaluated and KT gel was formulated as a gel containing different pH, different concentrations of polymer (poloxamer 407, carbopol 941), propylene glycol, ethanol and various enhancers. The resulting KT gels were evaluated with respect to their viscosity, in vitro drug permeation rate through hairless mouse skin and stability. In n-octanol and chloroform, the lipid-water partition coefficient of KT was the highest at pH 4 phosphate buffer. The apparent viscosity of KT gel increased with an increase in gel pH, polymer and enhancer concentration. But the apparent viscosity of KT gel decreased with an increase in ethanol concentration. The permeation rate of KT through hairless mouse skin from gels different pH was maximum at pH 4 which is close to KT $pK_{a}$ 3.54. The permeation rate decreased with an increase in polymer, propylene glycol concentration. But the permeation rate increased with an increase in ethanol. The increase of drug concentration from 1 to 3% induced linear increase in permeation rate. The best enhancer was the combination of $Labrasol^{\circledR},\;Transcutol^{\circledR}$, oleic acid and l-menthol. In the accelerated stability test(25, 40 and $50{\circ}C$), pH 5 gel was most stable and pH 4 gel was most unstable for 90 days.

• Environmental Analysis Health and Toxicology
• /
• v.16 no.4
• /
• pp.223-226
• /
• 2001

Acetanilide is a High Production Volume Chemical, which is produced about 2,300 tons/year in Korea as of 1998 survey. Most is used as an intermediate for synthesis of pharmaceuticals and dyes. The chemical is one of seven chemicals, which are under the frame of OECD SIDS program sponsored by National Institute of Environmental Research of Korea. Regarding the information on the environmental fate. bioconcentration is one of important factor to estimate the environmental tranfer. However, measurement of bioconcentration needs high expense and time. For this reason, OECD recommends to use BCFWIN model to estimate bioconcentration of organic chemicals, BCFWIN estimates the bioconcentration factor (BCF) of an organic compound using the log octanol-water partition coefficient (Kow) of the compound. Structures are entered into BCFWIN through SMITES (Simplified Molecular Input Line Entry System) notations. The BCFWIN method classifies a compound as either ionic or non-ionic. ionic compounds include carboxylic acids, sulfonic acids and salts of sulfonic acids, and charged nitrogen compounds (nitrogen with a + 5 valence such as quaternary ammonium compounds). All other compounds are classified as non-ionic. In this study, bioaccumulation of acetanilide was estimated using BCFWIN model based on SMIIES notation, chemical name data and partition coefficient as one of environmental fate/distribution of the chemical elements.