• 한국환경과학회지
• /
• 제13권2호
• /
• pp.175-180
• /
• 2004

A prompt gamma-ray neutron activation (PGNA) system was simulated by the Monte Carlo N-Particle transport code (MCNP-4A) to estimate the level at which the scattered photon fluence rate, the absolute efficiency of the HPGe-detector, the volume of the concrete sample and the $^{35}$ /Cl(n, ${\gamma}$) reaction rate in this sample contribute to the count rate in the NaCl concentration measurement. The n- ${\gamma}$ fluence rates at the ST-2 beam tube exit of the HANARO reactor were used as input data, and the GAMMA-X type HPGe detector was modeled to tally 1.1649 MeV ${\gamma}$ -rays emitted from the $^{35}$ Cl(n, ${\gamma}$) reaction in the concrete sample. For three cylindrical concrete samples of 13.8, 46.8 and 157.1 ㎤ volumes, respectively, the relations between the NaCl weight fractions of 0.1, 1, 2 and 5 % in each of the concrete samples and the 1.1 649 MeV pulses created in the HPGe detector model were studied. As a result, it was found that the count rate at the same NaCl concentration nearly depends on the volume of the samples in a simulated condition of the same NaCl concentration samples, and that the linearities of the NaCl concentration calibration curves were reasonable in the narrow range of the NaCl weight fraction.

• Journal of Animal Science and Technology
• /
• 제63권6호
• /
• pp.1433-1442
• /
• 2021

In this study, Saccharomyces cerevisiae culture fluid (SCCF) has been added to a diet of lactating dairy cows to attempt to improve the ruminal fermentation and potentially increase the dry matter intake (DMI) and milk yield. This study was conducted to investigate the effects of SCCF on the milk yield and blood biochemistry in lactating cows during the summer. Twenty-four Holstein dairy cows were randomly assigned to one of four treatments: (1) total mixed ration (TMR-1) (Control); (2) TMR-1 supplemented with SCCF (T1); (3) TMR-2 (containing alfalfa hay) (T2); and (4) TMR-2 supplemented with SCCF (T3). SCCF (5 ml/head, 2.0×10⁷ CFU/mL) was mixed with TMRs daily before feeding to dairy cows. The mean daily temperature-humidity index (THI) during this trial was 76.92 ± 0.51 on average and ranged from 73.04 to 81.19. For particle size distribution, TMR-2 had a lower >19 mm fraction and a higher 8-9 mm fraction than TMR-1 (p < 0.05). The type of TMR did not influence the DMI, body weight (BW), milk yield and composition, or blood metabolites. The milk yield and composition were not affected by the SCCF supplementation, but somatic cell counts were reduced by feeding SCCF (p < 0.05). Feeding SCCF significantly increased the DMI but did not affect the milk yield of dairy cows. The NEFA concentration was slightly decreased compared to that in the control and T2 groups without SCCF. Feeding a yeast culture of S. cerevisiae may improve the feed intake, milk quality and energy balance of dairy cows under heat stress.

• 자원리싸이클링
• /
• 제12권5호
• /
• pp.42-49
• /
• 2003

넓은 입도분포를 가지는 헤마타이트 철광석을 사용하여 $H_2$ 및 $H_2$-CO 혼합가스 분위기에서 환원 및 탄회특성에 대하여 고찰하였다. 환원에 의한 활성화에너지 값은 약 20kJ/mol 였다. 환원 및 탄화단계에서 무게변화는 환원단계에서는 약 28% 감소하였고, 탄화단계에서는 약 5%증가하였다. 이는 이론 계산식에 의한 값과 거의 일치하였다. 온도, 입도 및 가스비($_H2$/CO=1～5 범위)에 따른 탄화속도는 온도가 낮을수록 입자가 작을수록 그리고 가스비가 작을수록 탄화속도가 증가하였다. 또한 $H_2$의 가스비($H_2$/CO=1)가 낮을 때는 유리카본(C, free carbon)이 발생하였다. 수소가스를 혼합하였을 경우가 탄화속도는 증가하였으나, 수소분율에 비례하여 증가하지는 않았다. 혼합가스 중 수소분율($X_{H2}$ )이 0.5일 때 ($H_2$/CO=1) 탄화속도가 최대였다. 이때 수소가 탄화철 생성과정에 있어서 촉매역할을 한 것으로 추정된다.

• Composites Research
• /
• 제23권2호
• /
• pp.10-16
• /
• 2010

가압주조법으로 제조된 알루미나 섬유와 SiC 입자 혼합금속복합재료의 마찰특성을 조사하였다. 핀 형태의 마모 시험편은 전체 부피비 20%에 섬유와 입자의 서로 다른 비를 갖고 있다. 혼합금속복합재료의 윤활마모시험은 핀과 디스크 타입의 마모시험기를 사용하여 수행되었는데, 상온과 고온 $100^{\circ}C$와 $150^{\circ}C$.에서의 건식마찰특성을 각각 수행하였다. 마모면의 미시분석은 주사전자현미경(SEM)으로 조사하여 마찰특성과 마모거동을 분석하였다. 시험 결과 마모저항은 상온에서는 섬유와 같은 방향인 (PR) 방향에서는 SiC입자의 증가에 따라 향상되었다. 고온에서는 섬유와 수직한 방향(N)의 마모특성은 PR방향의 섬유가 마모면으로 전체적으로 쉽게 뽑히기 때문에 PR방향의 금속보합재료의 마모특성보다 우수하였다. 한편 마찰계수는 온도증가에 따라 감소하였다.

• 한국입자에어로졸학회지
• /
• 제14권4호
• /
• pp.145-151
• /
• 2018

Rod shaped Potassium hexatitanate ($K_2Ti_6O_{13}$) was synthesized from colloidal mixture of $TiO_2$, KOH and graphene oxide (GO) by aerosol spray drying and post heat treatment. Firstly, $TiO_2-KOH-GO$ composites were fabricated by aerosol spray drying in argon atmosphere. The composites were then calcined to form a rod shaped morphology of potassium titanate (KTO) in the presence of graphene at $900^{\circ}C$ for 3 h in argon atmosphere. Finally, the rod shaped KTO was obtained after removal of graphene (GR) at $800^{\circ}C$ and 3 h in air atmosphere. Characterization of the synthesized $K_2Ti_6O_{13}$ was carried out using the XRD, BET and FE-SEM. The length and diameter of the synthesized $K_2Ti_6O_{13}$ could be controlled by weight fraction of GO in the aerosol precursor. The length of $K_2Ti_6O_{13}$ rod increased with decreasing its diameter as GO concentration increased. The aspect ratio of the synthesized $K_2Ti_6O_{13}$ rod was controlled from 5 to 13.

• 산업기술연구
• /
• 제17권
• /
• pp.37-42
• /
• 1997

Generation and physico-chemical characteristics of municipal solid wastes are very important for sanitary management. However, that has not been investigated so far especially in chunchon. And so, we tried to examine many things in detail. It was resulted that density was $90{\sim}94kg/m^3$ in school and office zone and $290{\sim}298kg/m^3$ in apartment and market place. The compositional weight fraction was food, 40~54%, paper, 14~18%, vinyl and prastic, 14~20% in house zone and market place and paper, 42~70% in school and office zone. Moisture was estimated to be 54~57% in independent house zone, apartment and market place and 11~23% in school and office zone. And three composition was water content, 44.1%, incineration particle, 11.2%, volatile parts, 44.7% in respectively. That is because of seasonal effects and regional chracteristics. In the results of chemical composition and caloric value analysis, carbon(C) was 80% in vinyl and plastic and oxygen(O) was 54.4% in paper.

• 한국가시화정보학회지
• /
• 제12권1호
• /
• pp.49-53
• /
• 2014

In this study, a novel FDR-SPC is first synthesized in this study. The drag reducing functional radical such as PEGMA (Poly(ethylene) glycol methacrylate) has been utilized to participate in the synthesis process of the SPC. The types of the baseline SPC monomers, the molecular weight and the mole fraction of PEGMA were varied in the synthesis process. The resulting SPCs were coated to the substrate plates for the subsequent hydrodynamic test for skin friction measurement. In a low-Reynolds number flow measurement using PIV (Particle Image Velocimeter), a significant reduction in Reynolds stress was observed in a range of specimen, with the maximum drag reduction being 15.9% relative to the smooth surface.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.134-141
• /
• 1993

Electro-Rheological(ER) fluids undergo a phase-change when subjected to an external electic field, and this phase-change typically manifests itself as a many-order-of-magnitude change in the rheological behavior. This phenomenon permits the global stiffness and energy- dissipation properties of the beam structures to be tuned in order to synthesize the desired vibration characteristics. This paper reports on a proof-of-concept experimental investigation focussed on evaluation the vibration properties of hollow cantilevered beams filled with an ER fluid. and consequently deriving an empirical model for predicting field-dependent vibration characteristics. A hydrous-based ER fluid consisting of corn starch and silicone oil is employed. The beams are considered to be uniform viscoelastic materials and modelled as a viscously-damped harmonic oscillator. Natural frequency, damping ratio and elastic modulus are evaluated with respect to the electric field and compared among three different beams: two types of different volume fraction of ER fluid and one type of different particle concentration of ER fluid by weight. Transient and forced vibration responses are examined in time domain to demonstrate the validity of the proposed empirical model and to evaluate the feasibility of using the ERfluid as an actuator in a closed-loop control system.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1649-1657
• /
• 1993

This paper reports on a proof-of-concept experimental investigation focused on evaluating the vibration characteristics and control of smart hollow cantilever beams filled with an electro-rheological(ER) fluid. The beams are considered to be of uniform viscoelastic materials and modelled as a viscously-damped harmonic oscillator. Electric field-dependent natural frequencies, loss factors and complex moduli are evaluated and compared among three different beams : two types of different volume fraction of ER fluid and one type of different particle concentration of ER fluid by weight. Modal characteristics of the beams are observed in both the absence and the presence of electric potentials. It is also shown that by constructing active control algorithm the removal of structural resonances and the suppression of tip deflection are obtained. This result provides the feasiblility of ER fluids as an active vibration control element.

• 전기화학회지
• /
• 제17권1호
• /
• pp.57-64
• /
• 2014

다공성의 활성탄소와 상대적으로 입자크기가 더 작은 carbon black을 여러 비율로 혼합하여 다양한 적층배열 구조를 갖는 축전식 탈염용 전극을 제조하였고 활성탄소만 존재하는 전극과 비교 분석하였다. 연구 결과 carbon black의 양이 증가할수록 탄소체의 배열 구조가 조밀해지는 것을 관찰하였고, mesopore가 약 10% 증가하는 것으로 나타났다. 순환전압전류법을 이용하여 축전용량을 살펴보았을 때 carbon black만으로는 이온흡착에 대한 영향이 거의 없지만 활성탄소체와 혼합하여 carbon black의 양이 증가할수록 비축전용량 역시 증가하는 것을 관찰하였다. 최종적으로 셀에 전극을 채용하여 탈염실험을 수행한 결과, carbon black의 양이 가장 많이 함유된 전극의 탈염 성능이 가장 우수하였고, pH의 변화의 폭이 가장 좁았다. 또한, 축전된 전하의 분석을 통해 비페러데이 전류의 비율이 증가하는 것으로 나타나 페러데이 반응에 대한 영향이 감소하는 것을 관찰하였다. 이는 carbon black의 첨가로 전극의 적층배열 구조가 변형함으로써 mesopore의 비율이 증가해 페러데이 반응에 의한 영향이 감소하였고, 탈염 성능 역시 증가하는 것을 알 수 있었다.