• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.307-308
• /
• 2006

Recently, fire extinguishing systems based on water mists have been attracting public attentions in marine engineering. Performance of the fire extinguishing systems is influenced by the size and distribution of spayed water mists. Droplet analyzing method based on image processing technique for measuring droplet size and distribution has been developed. The morphological method based on partial curvature information of pre-processed images was adopted for recognition and separation of overlapped particles. Tested results show that the present method may be reliable for the analysis of the size and distribution of droplets produced by water mist spay flow.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.317-324
• /
• 2020

Plastic wastes generated from domestic waste are separated by mixed discharge with foreign substances, and the cost of the separation and screening process increases, so recycling is relatively low. In this study, as a fundamental study for recycling mixed plastic wastes generated from domestic waste into concrete aggregates, changes in concrete properties according to the plastic waste types and the substitution rate were evaluated experimentally. The mixed plastic waste aggregate(MPWA) was found to have a lower density and a higher absorption rate compared to the coarse aggregate with good particle size distribution. On the other hand, the single plastic waste aggregate(SPWA) was composed of particles of uniform size, and both the density and the absorption rate were lower than that of the fin e aggregate. It was found that the MPWA substitution concrete did not cause a material separation phenomenon due to a relatively good particle size distribution even with the largest amount of plastic waste substitution, and the amount of air flow increased little. The compressive strength and flexural strength of the PWA substitution concrete decreased as the amount of substitution of the PWA increased due to the low strength of the PWA, the suppression of the cement hydration reaction due to hydrophobicity, and the low adhesion between the PWA and the cement paste. It was found that the degree of deterioration in compressive strength and flexural strength of concrete substituted with MPWA having good particle size distribution was relatively small.

• Journal of Dairy Science and Biotechnology
• /
• v.25 no.2
• /
• pp.29-32
• /
• 2007

An understanding functional properties and molecular interactions of milk proteins was critical to improve qualities of fermented dairy products including yogurts and cheeses. Extensive rearrangements of casein particles were important factors to enhance whey separation in yogurt gel network. The use of high hydrostatic pressure treated whey protein as an ingredient of low fat processed cheese food resulted in the production of low fat processed cheese food with acceptable firmness and enhanced meltabilities. Milk protein-based nano particles produced by self-association of proteins could be better nutrient delivery vehicle than micro particle since particle size reduction in nano particles could lead to increased residence time and surface area available in GI tract.

• 한국유가공학회:학술대회논문집
• /
• 2007.09a
• /
• pp.31-37
• /
• 2007

An understanding functional properties and molecular interactions of milk proteins was critical to improve qualities of fermented dairy products including yogurts and cheeses. Extensive rearrangements of casein particles were important factors to enhance whey separation in yogurt gel network. The use of high hydrostatic pressure treated whey protein as an ingredient of low fat processed cheese food resulted in the production of low fat processed cheese food with acceptable firmness and enhanced meltabilities. Milk protein-based nano particles produced by self-association of proteins could be better nutrient delivery vehicle than micro particle since particle size reduction in nano particles could lead to increased residence time and surface area available in GI tract.

• Membrane Journal
• /
• v.14 no.4
• /
• pp.304-311
• /
• 2004

The poly(1-trimethylsilyl-1-propyne) (PTMSP) and silica-filled PTMSP membranes were prepared by casting from a toluene solution on porous polyetherimide (PEI). FT-IR spectrum, GPC and SEM pictures have been taken to characterize the membranes. The particle size of membrane decreases as silica content of the membrane increases from 23 to 60 wt%, and a uniform distribution of the silica is observed. The separation properties of the gas mixture (32 mol% $H_2$/ 68 mol% $N_2$) through the composite membranes were studies as a function of pressure and percentage of silica. Selectivity values of $H_2$/$N_2$ increased as the pressure of permeation cell and silica content of the membrane increased. The real separation factor($\alpha$), head separation factor($\beta$), and tail separation factor((equation omitted)) of PTMSP-PEI composite membrane were 2.28, 1.58, and 1.44 respectively at $\Delta$P 30 psi and $25^{\circ}C$. $\alpha$, $\beta$, and (equation omitted) of PTMSP-Silica-PEI composite membrane for 60 wt% silica were 3.34, 1.95, 1.72 at $\Delta$P 30 psi and $25^{\circ}C$.

• Fashion & Textile Research Journal
• /
• v.10 no.2
• /
• pp.254-259
• /
• 2008

Poly(ethylene-co-vinylacetate)(EVA) microspheres were prepared by a thermally induced phase separation. The microsphere formation occurred by the nucleation and growth mechanism in the metastable region. The diluents used were toluene. The microsphere formation and growth was followed by the cloud point of the optical microscope measurement. The microsphere size, which was obtained by SEM observation and particle size analyzer, became decreased when the titanium dioxide($TiO_2$) concentration was higher. The deodorizing function of the prepared fabrics was studied by the determination of the decomposing capability for $NH_3$. The deodorant activity of these deodorizing fabrics was measured by chromogenic gas detector tubes. The deodorant activity of $NH_3$ increased with increasing $TiO_2$ concentration of EVA microsphere.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.2
• /
• pp.99-103
• /
• 1999

Self-Emulsifying System(SES), an isotropic mixture of oil and surfactant which forms oil-in-water emulsion, is expected to improve in vitro drug dissolution and enhance in vivo drug absorption. A poorly water soluble drug, ibu-profen(IBP) was incorporated into the SES to improve absorption, and enhance bioavailability of drug. Medium chain triglyceride, glyceryl tricaprylate(GTC) as an oil, and Tween 85 as a surfactant were used to formulate SES. To characterize SESs with various concentrations of Tween 85, the phase separation and solubility of IBP-SEDDS containing IBP as a function of Tween 85 concentration were conducted, and the particle size was measured using photon correlation spectroscopic method. The SES with optimal concentration of Tween 85(35%(w/w)) was selected based on its high drug loading, small particle size and low surfactant concentration. After an oral administration of IBP-SEDDS and IBP suspension in methyl cellulose equivalent to 40.0 mg/kg to rats, the pharmacokinetic parameters were compared. The $C_{max}(163.17\;vs\;88.82\;{\mu}g/ml)$, $AUC(12897.01\;vs\;8751.13\;{\mu}g\;min/ml)$ and Bioavailability(86.44 vs 58.65%) significantly increased but $T_max(10\;vs\;20\;min)$ was significantly advanced. The current SEDDS containing IBP provide an alternative to improve an oral bio-availability of IBP.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.201-207
• /
• 2004

Dissolved air flotation (DAF) is a solid-liquid separation process that uses fine rising bubbles to remove particles in water. Most of particle-bubble collision occurs in the DAF contact zone. This initial contact considered by the researchers to play a important role for DAF performance. It is hard to make up conceptual model through simple mass balance for estimating collision efficiency in the contact zone because coupled behavior of the solid-liquid-gas phase in DAF system is 90 complicate. In this study, 2-phase(gas-liquid) flow equations for the conservation of mass, momentum and turbulence quantities were solved using an Eulerian-Eulerian approach based on the assumption that very small particle is applied in the DAF system. For the modeling of turbulent 2-phase flow in the reactor, the standard $k-{\varepsilon}$ mode I(liquid phase) and zero-equation(gas phase) were used in CFD code because it is widely accepted and the coefficients for the model are well established. Particle-bubble collision efficiency was calculated using predicted turbulent energy dissipation rate and gas volume fraction. As the result of this study, the authors concluded that bubble size and recycle ratio play important role for flow pattern change in the reactor. Predicted collision efficiency using CFD showed good agreement with measured removal efficiency in the contact zone. Also, simulation results indicated that collision efficiency at 15% recycle ratio is higher than that of 10% and showed increasing tendency of the collision efficiency according to the decrease of the bubble size.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.225-230
• /
• 1988

Emulsion stability, viscosity, and oil particle size of mayonnaise, prepared at various egg yolk contents, were investigated. With increasing of the egg yolk ratio, emulsion stability became stronger, viscosity became higher, and oil particle size became smaller. Freezing stability of mayonnaise containing below 6.5% egg yolk was reduced significantly. Referring to vibration separation, it was observed that stability of mayonnaise containing 2% and 3.5% egg yolk was very low and containing over 5% egg yolk was stable relatively. Viscosity of mayonnaise, stored at $-10^{\circ}C$, was reduced significantly during first 24hrs. and then levelled off. Oil particle size of mayonnaise, stored at $-10^{\circ}C$, became larger with increasing the storage time and the tendency to change was apparent in the sample containing below 6.5% egg yolk.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.30-39
• /
• 2014

The trajectories of PCB(Printed Circuit Board) particles in the corona discharge electrostatic separation was simulated. The PCB particles are prepared by crushing bare board, which disassembled from electronic components, consist mostly of copper and FR-4(Flame Retardant Level-4) Firstly, a model was established for calculating of detachment points of PCB particles from the rotating electrode in separator. The model of detachment points was derived from equilibrium of force such as gravity force, centrifugal force, electrostatic force. The trajectories of particles after detachment was calculated by acceleration derived from time-integrating method of motion equation. In this simulation, particle size, supplied voltage, rotation speed of rotating roll electrode and angle of induction electrode were adopted as variables. While the trajectories of FR-4 particles were affected by all variables, rotation speed of rotating roll electrode was dominant variables affecting trajectories of copper particles.