• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.2
• /
• pp.295-302
• /
• 2006

Over the past decades, a flocculation and/or sedimentation process have been adopted to remove pollutants from CSOs. It has been learned that major factors affecting settlement of pollutants are the particle size distribution, their settling velocities and their specific gravity. It is, therefore, a good idea to analyze the particle size distribution and settleability of CSOs pollutants in order to develop details in designing a process. Discussed in this study are pollutant characteristics of CSOs such as particle size distribution and settleability of pollutants. The power law function is applied and is found to be an effective and reliable index for expressing the particle size distribution of pollutants in CSOs. Based on the regression analysis it is observed that the derived constants of curves representing settling velocity profile are proportional to the initial concentration of particles and to the ${\beta}$-values of power law distributions.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.860-863
• /
• 2005

The microcapsules containing fragrant oil as functional material were prepared by in-situ polymerization with prepolymer that was made from melamine-formaldehyde (MF) as wall material of microcapsules. The effects of polymerization variables, such as the nature and concentration of surfactants, stirring rate, and stirring time, on the size and distribution of the particles were investigated. Fourier transform-infrared spectroscopy (FT-IR), thermal analysis, particle size analysis, scanning electron microscopy (SEM) observation were used to investigate the characteristics of microcapsules. Through the FT-IR and SEM analysis, we found that the prepared microcapsules were containing fragrant oil and the shape of particle was spherical. The nature and concentration of surfactants, stirring rate, and stirring time had profound effects on the particle size and particle size distribution.

• Archives of Pharmacal Research
• /
• v.3 no.2
• /
• pp.65-74
• /
• 1980

Analysis of particle size distribution of a sample of fine aluminum hydroxide powder was carried out by four different methods, i. e., conductivity, air permeability, gas-adsorption and sedimentation. Each method was reproducible. The results obtained by Coulter counter and sedimentation balance were similar, and the data obtained by Lea and Nurse permeameter and Stroehlein areameter were also similar. But the results differ considerabley between the former and the latter. The advantages and disavantages of each method were discussed briefly and a means of comparing the results with those obtianed by surface area measurements was shown.

• Journal of Powder Materials
• /
• v.20 no.3
• /
• pp.186-190
• /
• 2013

The electrochemical performance for the corrosion of zinc anodes according to particle size and shape as anode in Zn/air batteries was study. We prepared five samples of Zn powder with different particle size and morphology. For analysis the particle size of theme, we measured particle size analysis (PSA). As the result, sample (e) had smaller particle size with $10.334{\mu}m$ than others. For measuring the electrochemical performance of them, we measured the cyclic voltammetry and linear polarization in three electrode system (half-cell). For measuring the morphology change of them before and after cyclic voltammetry, we measured Field Emission Scanning Electron Microscope (FE-SEM). From the cyclic voltammetry, as the zinc powder had small size, we knew that it had large diffusion coefficient. From the linear polarization, as the zinc powder had small size, it was a good state with high polarization resistance as anode in Zn/air batteries. From the SEM images, the particle size had increased due to the dendrite formation after cyclic voltammetry. Therefore, the sample (e) with small size would have the best electrochemical performance between these samples.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.165-178
• /
• 2000

In this study the effects of block distance have been investigated on the particle deposition efficiency in the collecting cell of two-stage electrostatic precipitator by numerical analysis. Particle trajectories have been changed by the electrostatic and inertial force of particle with the inlet velocity electrostatic number and particle diameter. The total deposition efficiency has a minimum value by the interaction between the effect of particle inertial force and electrostatic force in the collecting cell. The increase of block distance makes the total deposition efficiency decrease under the range of the particle size which has the minimum deposition efficiency. However beyond the range of particle size which has minimum deposition efficiency total deposition efficiency has no trend with the variation of block distance.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.3
• /
• pp.278-284
• /
• 2017

Generally, classifiers have been used as machines to crush raw materials and classify suitable particle sizes in all industrial fields, such as food, chemical, and mineral. However, the technique for classifying micron-sized particles between 5 and $20{\mu}m$ is inferior. In particular, numerous experiments and considerable experiences are required to predict the particle size, because the classifier particle size is determined according to the internal flow. However, it is quite difficult to set the driving conditions so that the desired particle size can be classified only by experience and experimentation. Therefore, this study proposes a method of predicting the average particle size by employing multiphase flow analysis and the Taguchi method; this method is subsequently verified.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.77-86
• /
• 2012

We have carried out a series of numerical experiments to study the effect of average particle size on the mechanical properties of granite-derived weathered soils. A distinct-element method was adopted to study the changes in macro-scale mechanical properties with particle size and maximum-to-minimum particle size ratio. The numerical soil specimen with cohesion values of 0.25 MPa and internal friction angle of 29 degrees was prepared for reference. While keeping the porosity values constant, we varied particle size and size distribution to study how cohesion and internal friction angle changes. The experimental results show that the values of cohesion apparently decrease with increasing particle size. Changes in the values of internal friction angles are small, but there is a trend of increase in internal friction angle as the average particle size increases. This study demonstrates a possibility that the results of numerical experiments of this type may be used for rapid estimation of mechanical properties of granite-derived weathered soils. For example, when mechanical properties obtained through in situ tests and particle size data obtained through lab analysis are available for a site, it is expected that the mechanical properties of weathered granite soils with varying degrees of weathering (thus, varying particle size) may be estimated rapidly only with particle size data for that site.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.4
• /
• pp.635-643
• /
• 2017

The properties of rice were studied, and 8 rice flour cultivars were used to study the effect of particle size on the physicochemical properties, color value, RVA viscosities, water absorption index (WAI), and water solubility index (WSI) of rice flours. The mean particle size by the 3 particle size classification of 150 mesh, 200 mesh, and 250 mesh was, $90.75{\mu}m$, $60.73{\mu}m$, $39.94{\mu}m$, respectively. Thai rice had the highest amylose content and Samkwang rice had the lowest amylose content. Protein content of rice flours prepared was decreased as the particle size of rice flour decreased. In terms of color values, the L-value and the a-value of rice flour were increased as the particle size of rice flours decreased, while the b-value was decreased as the particle size of rice flours decreased. Using a rapid visco analyzer (RVA), the initial pasting temperature of Thai rice cultivar was found to be the highest; the peak viscosities of Sunpum cultivar and Misomi cultivar, and Samkwang rice were higher than those of other rice flours. The water absorption index and water solubility index were increased as the particle size of rice flour decreased. In order to use processed rice flour for the development of processed foods, proper characteristics of the cultivars and particle size should be considered.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.243-254
• /
• 1996

The main purpose of this study is to investigate the collection efficiency characteristics of a cylindrical ESP. To do that, it is necessary to analyze the electric field, gas flow field, and mechanism of particle movement by numerical simulation based on EHD model. For a gas flow field, Navier-Stokes equation involving the electric source term was solved by SIMPLE algorithm. In case of the electric field, the current continuity and electric field equations were solved by S.O.R. method. The analysis of particle movement was performed on the basis of PSI-CELL model from the Lagrangian viewpoint. The results showed that the influence on the gas flow field by the electric field is almost negligible in a cylindrical ESP. The particle drift velocity $V_P$ toward the collection surface is increased continuously by the electrostatic force due to the rise of particle charge as the particle is moving to the flow direction and the particle size becomes larger. The collection efficiency is to quitely higher with the increase of applied voltage for the same particle size, while becomes smaller as the inlet velocity is increased.

• Nutrition Research and Practice
• /
• v.6 no.2
• /
• pp.120-125
• /
• 2012

The aim of this study was to investigate the influencing factors that characterize low density lipoprotein (LDL) phenotype and the levels of LDL particle size in healthy Korean women. In 57 healthy Korean women (mean age, $57.4{\pm}13.1$ yrs), anthropometric and biochemical parameters such as lipid profiles and LDL particle size were measured. Dietary intake was estimated by a developed semi-quantitative food frequency questionnaire. The study subjects were divided into two groups: LDL phenotype A (mean size: $269.7{\AA}$, n = 44) and LDL phenotype B (mean size: $248.2{\AA}$, n = 13). Basic characteristics were not significantly different between the two groups. The phenotype B group had a higher body mass index, higher serum levels of triglyceride, total-cholesterol, LDL-cholesterol, apolipoprotein (apo)B, and apoCIII but lower levels of high density lipoprotein (HDL)-cholesterol and LDL particle size than those of the phenotype A group. LDL particle size was negatively correlated with serum levels of triglyceride (r = -0.732, $P$ < 0.001), total-cholesterol, apoB, and apoCIII, as well as carbohydrate intake (%En) and positively correlated with serum levels of HDL-cholesterol and ApoA1 and fat intake (%En). A stepwise multiple linear regression analysis revealed that carbohydrate intake (%En) and serum triglyceride levels were the primary factors influencing LDL particle size ($P$ < 0.001, $R^2$ = 0.577). This result confirmed that LDL particle size was closely correlated with circulating triglycerides and demonstrated that particle size is significantly associated with dietary carbohydrate in Korean women.