• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.248-258
• /
• 2001

The main mode of heat transfer of combustion gases at high temperature is thermal radiation of the participating gases, which are mainly carbon dioxide and water vapor. Therefore, the information of the emissivities of carbon dioxide and water vapor would be very important in the thermal performance analysis of a furnace. In this study, an exponential model for the emissivities of carbon dioxide and water vapor is derived as a function of the product of the partial pressure and characteristic length and a polynomial of reciprocal of temperature. Error analysis of the calculated values from the present model is performed for the temperature ranges of 555.6∼2777.8K and the partial-pressure-length product ranges of 0.09144∼609.6 cm-atm. For carbon dioxide, the difference between the values from the present model and the Hottels chart is less than 2.5% using a polynomial in 1/T of degree of 4. For water vapor, the model can predict the emissivity within 2.5% difference using a polynomial in 1/T of degree of 3.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2892-2897
• /
• 2008

Plasma techniques have been proposed to generate a hydrogen enrich gas to investigate a feasibility of plasma techniques on a fuel reforming, we considered a dry reforming and a partial oxidation with methane in the atmospheric pressure. For these experiments, we employed an arc jet plasma reactor. The effects of input power and oxidizer in each process were investigated by product analysis, including carbon monoxide, hydrogen, ethylene, propane, and acetylene as well as methane and carbon dioxide. In both processes, input electrical power activated the reactions significantly. The increased ratio of the carbon dioxide to methane in the dry reforming doesn't affect to a methane conversion, whereas increased ratio of oxidizer to methane in the partial oxidation was very effective for the reaction. Moreover, for a simultaneous treatment of methane and carbon dioxide, a feasibility of a dry reforming combined with partial oxidation also has been investigated.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.231-236
• /
• 2016

Electrocatalytic reduction can produce useful chemicals and fuels such as carbon monoxide, methane, formate, aldehydes, and alcohols using carbon dioxide, the green house gas, as a reactant through the supply of electrical energy. In this study, tin-lead (Sn-Pb) alloy electrodes are fabricated by electrodeposition on a carbon paper with different alloy composition and used as cathode for electrocatalytic reduction of carbon dioxide into formate in an aqueous system. The prepared electrodes are measured by Faradaic efficiency and partial current density for formate production. Electrocatalytic reduction experiments are carried out at -1.8 V (vs. Ag/AgCl) using H-type cell under ambient temperature and pressure and the gas and liquid products are analyzed by gas chromatograph and liquid chromatograph, respectively. As results, the Sn-Pb electrodes show higher Faradaic efficiency and partial current density than the single metal electrode. The Sn-Pb alloy electrode which have Sn:Pb molar ratio=2:1, shows the highest Faradaic efficiency of 88.7%.

• Journal of Chest Surgery
• /
• 제25권12호
• /
• pp.1399-1403
• /
• 1992

The evaluation of the effectivess of ongoing cardiopulmonary resucitation efforts is dependent on the commonly used methods, such as the presence of femoral or carotid artery pulsations, arterial blood gas determinations, peripheral arterial pressure and intracardiac pressure monitoring. But recent studies suggest that end-tidal carbon dioxide tension serves as a non-invasive measurement of pulmonary blood flow and therefore cardiac output under constant ventilation. A prospective clinical study was done to determine whether end-tidal carbon dioxide monitoring in open heart surgery under cardiopulmonary bypass could be used as a prognostic indicator of bypass weaning. We monitored end-tidal PCO2 values continuously during cardiopulmonary bypass in 30 patients. "Ohmeda 5210 CO-2 monitor" under infrared absorption method were incorperated into the ventilator circuit by means of a side point adaptor between endotracheal tube and ventilator tubing. 18 patients[Group I ] were res-ucitated from partial bypass followed by aorta cross clamp off and 12 patients[Group II ] from aorta cross clamp off followed by partial bypass. But there was no difference between two groups[p>0.05]. The value of end-tidal carbon dioxide tension during ventricular fibrillation or nearly arrest state was 6.6$\pm$2.9 mmHg, and at the time of spontaneous beating was 19.3$\pm$5.6 mmHg[Mean$\pm$Standard deviation], In conclusion end-tidal carbon dioxide tension monitoring provides clinically useful, continous, noninvasive and supplementary prognostic indicator during cardiopulmonary bypass weaning procedures.rocedures.

• 공업화학
• /
• 제7권4호
• /
• pp.605-613
• /
• 1996

Cellulose acetate(CA) 비대칭막, CA 복합막 그리고 cellulose triacetate(CTA) 비대칭막을 통한 순수 이산화탄소 및 메탄의 투과 특성을 측정하여, 투과성능의 운전압력에 대한 영향을 조사하였다. 그리고 이산화탄소와 메탄의 혼합기체($CO_2/CH_4=57.6/42.4$)에 대한 투과 특성을 조사하여, 이를 순수 기체의 투과 특성으로부터 얻어진 결과와 비교하였다. 실험은 25~125 psig의 분압과 상온에서 실험하였다. CA 복합막과 CTA 막을 통한 기체의 투과거동은 CA 막의 투과 거동과 비슷하였다. CA 막, CA 복합막 그리고 CTA 막을 통한 순수 이산화탄소의 투과속도는 상부분압이 증가함에 따라 약간 증가하였으며, 반면에 메탄의 경우에는 상부분압에 의존하지 않고 일정하였다. 그러나 혼합기체의 경우 이산화탄소에 의한 가소화 효과와 각 기체의 경쟁효과에 의해 순수 기체와는 다른 투과거동을 보였다. 각각의 분리막의 투과성능을 비교 할 때, CTA 막의 분리인자와 투과속도가 CA 막의 값들보다 높은 값을 나타내었으며, CA 복합막의 투과속도가 CA 막의 값보다 높은 값을 가졌다. 그러나 CTA 막의 경우 기계적 강도가 매우 낮았다. 결국 본 연구에 사용된 CA 복합막이 투과 플럭스가 크므로 이산화탄소와 메탄의 분리용 막으로 적합하다고 생각된다.

• 멤브레인
• /
• 제16권3호
• /
• pp.204-212
• /
• 2006

이산화탄소에 대한 가소화 안정성 및 이산화탄소/질소의 분리특성이 탁월한 폴리이서술폰(PES)중공사 분리막에 의한 이산화탄소 분리특성을 수치해석으로 알아보고자 하였다. 공정변수에 따른 이산화탄소 분리 거동을 예측하기 위하여 공급 기체와 투과기체가 같은 방향으로 흐르는 병류 흐름에 대한 분리막 공정 지배 방정식을 5차 Runge-Kutta-Verner 방법을 사용하여 Compaq Visual Fortran 6.6 소프트웨어를 이용 공정모사 프로그램을 개발하였다. 개발된 프로그램을 사용하여 수치해석을 수행한 결과, 이산화탄소 투과특성에 영향을 주는 가장 중요한 인자로서 공급 이산화탄소 분압, 투과측과 분리막 내부의 압력비 그리고 공급 기체가 분리막 내부에 머무르는 체류 시간임을 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.17-24
• /
• 2021

새로운 이산화탄소 분리용 흡착제 개발은 흡착속도, 소수성, 상용 흡착제보다 낮은 재생온도 등을 고려하여야 한다. 본 연구에서는 CO2를 분리하기 위하여 아미노실란이 그라프팅된 활성탄을 합성하였다. 아민 작용기 전구체로 methyltrimethoxysilane(MTMS) and 3-Aminopropyl-triethoxysilane(APTES)을 사용하여 그라프팅하였다. APTES를 그라프팅 활성탄이 MTMS을 사용한 것보다 우수한 흡착 특성을 나타내었다. 온도 및 이산화탄소 분압에 따른 흡착 특성으로 이산화탄소 분리 메커니즘을 규명하였다. 이산화탄소의 흡수/흡착능은 25 ℃에서 아민 그라프팅 활성탄과 활성탄과 비슷하지만 아민 그라프팅 활성탄이 75 ℃에서 더 높게 나타났다. 아민 작용기 그라프팅 활성탄은 이산화탄소 분압이 1 % 인 조건에서 활성탄보다 더 우수한 흡수능을 나타내었다. 아미노실란 그라프팅 활성탄은 물리적 흡착 특성을 지닌 화학적 흡수 메카니즘을 나타내었다. 아민 작용기가 부여되어 개질된 고체상 흡수/흡착제는 이산화탄소 흡착/흡수 공정만 아닌 재료 관련 산업에 큰 영향을 미칠 수 있는 고성능 복합 재료이며, 개발된 흡착제는 흡수/흡착 및 분리 관련 산업 공정에 적용될 수 있다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.171-178
• /
• 2008

The combustion and exhaust emission characteristics were investigated in an DME fueled HCCI engine. Carbon dioxide, nitrogen and mixed gas, which was composed of carbon dioxide and nitrogen, were used as control parameters of combustion and exhaust emission. As the oxygen concentration in induction air, which was occurred by carbon dioxide, nitrogen and mixed gas, was reduced, the start of auto-ignition was retarded and the burn duration was extended due to obstruction of combustion and reduction of combustion temperature. Due to these fact, indicated mean effective pressure was increased and indicated combustion efficiency was decreased by carbon dioxide, nitrogen and mixed gas. In case of exhaust emission, hydrocarbon and carbon monoxide was increased by reduction of oxygen concentration in induction air. Especially, partial burning was appeared at lower than about 18% of oxygen concentration by supplying carbon dioxide. However it was overcome by intake air heating.

• 센서학회지
• /
• 제20권5호
• /
• pp.311-316
• /
• 2011

Monitoring the carbon dioxide concentration in arterial blood is vital for the evaluation and prevention of pulmonary disease. Yet, domestic pure arterial blood carbon dioxide sensor technologies are not being developed, instead all sensors are imported. In this paper, we develop a real time monitoring system for arterial blood partial pressure of carbon dioxide($pCO_2$) gas from the wrist by using a carbon micro-heater. The micro-heater was fabricated with a thickness of 0.3 ${\mu}m$ in order to collect the carbon dioxide under the skin. The micro-heater has been designed to perform temperature compensation in order to prevent damage to the skin. Two clinical trials of the system were undertaken. As a result, we demonstrated that a portable, transcutaneous carbon dioxide analysis($TcpCO_2$) device produced domestically is possible. In addition, this system reduced the analysis time significantly. Carbon films could reduce the unit price of these sensors by replacing the gold film used in foreign models. Also, we developed a real time monitoring system which can be used with optical biosensors for medical diagnostics as well as gas sensors for environmental monitoring.

• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4635-4642
• /
• 2013

화력발전소로부터 배출되는 이산화탄소를 분리하기 위하여 급수가 다른 아민을 혼합한 개선 흡수제를 개발하고자 하였다. 급수가 다른 1, 2, 3급 아민을 혼합한 후 이산화탄소 부분압에 따른 이산화탄소 흡수능을 조사하였다. 동일한 압력에서 이산화탄소 흡수능은 3DMA1P 30wt%>3DMA1P 27wt%+MEA 3wt%>3DMA1P 27wt%+DEA 3wt% 순으로 나타내었으며, 이는 3급인 3DMA1P에 2급인 DEA보다는 1급인 MEA를 혼합하는 것이 우수한 흡수능을 보이고 있다. 따라서 흡수능이 우수한 3급 아민에 흡수속도를 높이기 위하여 1급 아민을 혼합하는 것이 유리함을 알 수 있다. 최종적으로 준경험 기액 평형모델을 이용하여 실험 결과를 계산한 결과 실험치와 잘 일치하였다.