• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.225-230
• /
• 2004

Synthesis gas is a high valued compound as a basic chemicals at various chemical processes. Synthesis gas is mainly produced commercially by a steam reforming process. However, the process is highly endothermic so that the process is very energy-consuming process. Thus, this study was carried out to produce synthesis gas by the partial oxidation of methane to decrease the energy cost. The effects of reaction temperature and flow rate of reactants on the methane conversion, product selectivity, product ratio, and carbon deposition were investigated with 13wt% Ni/MgO catalyst in a fluidized bed reactor. With the fluidized bed reactor, $CH_4$ conversion was 91%, and Hz and CO selectivities were both 98% at 850$^{\circ}C$ and total flow rate of 100 mL/min. These values were higher than those of fixed bed reactor. From this result, we found that with the use of the fluidized bed reactor it was possible to avoid the disadvantage of fixed bed reactor (explosion) and increase the productivity of synthesis gas.

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.289-295
• /
• 2003

Synthesis gas is produced commercially by a steam reforming process. However, the process is highly endothermic and energy intensive. Thus, this study was conducted to produce synthesis gas by the partial oxidation of methane to cut down the energy cost. Supported Ni catalysts were prepared by the impregnation method. To examine the activity of the catalysts, a differential fixed bed reactor was used, and the reaction was carried out at $750{\sim}850^{\circ}C$ and 1 atm. The fresh and used catalysts were characterized by XRD, XPS, TGA and AAS. The highest catalytic activity was obtained with the 13wt% Ni/MgO catalyst, with which methane conversion was 81%, and $H_2$ and CO selectivities were 94% and 93%, respectively. 13wt% Ni/MgO catalyst showed the best $MgNiO_2$ solid solution state, which can explain the highest catalytic activity of the 13wt% Ni/MgO catalyst.

• 공업화학
• /
• 제5권4호
• /
• pp.609-615
• /
• 1994

기체크로마토그래프에 직접 연결한 펄스 반응장치를 이용하여 10wt% $Ag/{\alpha}-Al_2O_3$ 촉매상에서 에틸렌 부분산화반응을 수행하였다. 산소가 분자흡착상태로 존재하기 어려운 실험온도에서 산소를 주입한 후 에틸렌을 주입하였을 때 산화에틸렌이 발생하였으며, 이 결과로부터 원자상태의 흡착산소가 산화에틸렌 생성에 관여함을 알 수 있었다. 흡착산소량과 몸체산소량을 감소시키면 산화에틸렌의 선택도는 감소하였다. 생성된 산화에틸렌은 에틸렌과 흡착산소로 분해되거나 아세트알데히드로 이성질화되었으나, 아세트알데히드로의 이성질화반응은 먼저 흡착된 산소에 의해서 크게 억제되었다.

• 한국수소및신에너지학회논문집
• /
• 제18권2호
• /
• pp.124-131
• /
• 2007

Methane is partially oxidized to produce the syngas by the lattice oxygen of metal oxides in the absence of gaseous oxygen. The present work deals with ferrite including copper component, which does not chemisorb methane, to investigate the suppression of the carbon deposition during the reduction of metal oxides by methane. Iron-based oxides of $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0) was synthesized by the co-precipitation method. Thermogravimetric Analysis(TGA) was used to observe the isothermal reduction behavior of $Cu_xFe_{3-x}O_4$ and $Fe_3O_4$ at $600-900^{\circ}C$ under methane atmosphere. The crystal structures of reduced specimens were characterized by X-rays powder diffraction(XRD) technique. From the analyses of TGA, it is concluded that the reduction kinetics of $CuFe_2O_4$ was the fastest among $Fe_3O_4$ and $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0). The X-ray diffraction analyses indicated that $Cu_xFe_{3-x}O_4$ was decomposed to Cu and $Fe_3O_4$ phase at $600^{\circ}C$ and was reduced to Cu and Fe phase at $800^{\circ}C$. $Fe_3O_4$, which was reduced at $900^{\circ}C$, showed Fe, graphite and $Fe_3C$ phases. On the contrary, $Cu_xFe_{3-x}O_4$ does not show the graphite or $Fe_3C$ phases. This results infer that Cu component suppress the carbon deposition on Cu-ferrite.

• 전기학회논문지
• /
• 제57권4호
• /
• pp.625-628
• /
• 2008

Ba-Zn ferrite powders for electromagnetic insulator were synthesized by self-propagating high-temperature synthesis(SHS) with a reaction of $xBaO_2+(1-x)ZnO+0.5Fe_2O_3+Fe{\rightarrow}Ba_xZn_{1-x}Fe_2O_4$. In this study, phase indentification of SHS products was carried out by using x-ray diffractometry and quasi-nano sized Ba-Zn powders were prepared by a pulverizing process. SHS mechanism was studied by thermodynamical analysis about oxidation reaction among $BaO_2,\;ZnO,\;Fe_2O_3$, and Fe. As oxygen pressure increases from 0.25 MPa to 1.0 MPa, the SHS reactions occur well and make clearly the SHS products. X-ray analysis shows that final SHS products formed with the ratio of $BaO_2/ZnO$ of 0.25, 1.0 and 4.0, are mainly $Ba_xZn_{1-x}Fe_2O_4$. Based on thermodynamical evaluation, the heat of formation increases in the order of $ZnFe_2O_4,\;BaFe_2O_4$, and $Ba_xZn_{1-x}Fe_2O_4$. This supports that $Ba_xZn_{1-x}Fe_2O_4$ phase is predominately formed during SHS reaction. The SHS reactions to form $Ba_xZn_{1-x}Fe_2O_4$ depends on oxygen partial pressure, and the heat of formation during the SHS reaction. The SHS reactions tends to occur well with increasing the oxygen partial pressure and BaO2/ZnO ratio in the reactants This means that the SHS reaction for the formation of Ba-Zn ferrite includes the reduction of BaO2/ZnO and the oxidation of Fe. $Ba_xZn_{1-x}Fe_2O_4$ powders after pulverizing is agglomeratedwith a size of about $50{\mu}m$, in which quasi-nano sized particles with about 300nm are present.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.52-53
• /
• 2005

$Y_2O_3$ film was directly deposited on Ni-3at%W substrate using DC reactive sputtering technique. Metallic yttrium was used for DC sputtering target and water vapor was used for oxidizing the deposited metallic Yttrium atoms on the substrate. The window of the water vapor turned out to be broad. The minimum partial pressure of water vapor was determined by sufficient oxidation of the $Y_2O_3$ film, and the maximum partial pressure of water vapor was determined by the non-oxidation of the target surface. As the sputtering power was increased, The deposition rate increased without narrowing the window. The fabricated $Y_2O_3$ films showed good texture qualities and surface morphologies. The YBCO film deposited directly on the $Y_2O_3$ buffered Ni-3at%W substrate showed $T_c$, $I_c$ (77 K, self field), and $J_c$ (77 K, self field) of 89 K, 64 A/cm and 1.l $MA/cm^2$, respectively.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.356-364
• /
• 2007

The partial reduction and water splitting properties of metal substituted ferrite mediums for two-step thermochemical hydrogen production, were carried out by TPR/O(Temperature programmed reduction/oxidation) method at a temperature of below 1173 K and under atmospheric pressure. $ZrO_2$ was added to the ferrite as a binder to prevent the sintering. As the results, the reactivity of the metal species added to the ferrite mediums decreased in the order of Cu>Co>Ni>Mn, on the basis of water-splitting temperature. It was also found that the produced hydrogen amounts in the water-splitting step on partial reduced mediums were corresponding to the consumed hydrogen amounts in the previously partial reduction step.

• Nuclear Engineering and Technology
• /
• 제43권5호
• /
• pp.421-428
• /
• 2011

The out-of-pile mechanical performance and microstructure of recrystallized Zr-1.5 Nb-S alloy was investigated. The strength of the recrystallized Zr-1.5Nb-O-S alloys was observed to increase with the addition of sulfur over a wide temperature range, from room temperature up to $300^{\circ}C$. A yield drop and stress serrations due to dynamic strain were observed at room temperature and $300^{\circ}C$. Wavy and curved dislocations and loosely knit tangles were observed after strained to 0.07 at room temperature, suggesting that cross slip is easier. At $300^{\circ}C$, however, dislocations were observed to be straight and aligned along the slip plane, suggesting that cross slip is rather difficult. At $300^{\circ}C$, oxygen atoms are likely to exert a drag force on moving dislocations, intensifying the dynamic strain aging effect. Oxygen atoms segregated at partial dislocations of a screw dislocation with the edge component may hinder the cross slip, resulting in the rather straight dislocations distributed on the major slip planes. Recrystallized Zr-Nb-S alloys exhibited ductile fracture surfaces, supporting the beneficial effect of sulfur in zirconium alloys. Oxidation resistance in air was also found to be improved with the addition of sulfur in Zr-1.5 Nb-O alloys.

• 한국수소및신에너지학회논문집
• /
• 제3권2호
• /
• pp.45-54
• /
• 1992

An applicability microencapsulation, using electroless copper plating, of hydrogen storage alloy powder as an anode material for nickel-hydrogen secondary batteries was investigated. Alloys employed were $LaNi_{4.7}Al_{0.3}$ and $MmNi_{4.5}Al_{0.5}$(Mm=mischmetal) which have an appropriate equilibrium pressure and capacity. The microencapsulation of the alloy powder was found to accelerate initial activation of electrodes and to increase capacity which is about 285mAh/g for $LaNi_{4.7}Al_{0.3}$. In addition, other charge and discharge characteristics, such as polarization and flatness of charge and discharge potential, were improved due to the role of copper layer as a microcurrent collector and an oxidation barrier of the alloy powder. $MmNi_{4.5}Al_{0.5}$ alloy showed lower capacity than $LaNi_{4.7}Al_{0.3}$ because of higher equilibrium pressure. Cyclic characteristics of both alloys were somewhat poor because of mainly shedding and partial oxidation of alloy powder during the cycling. However, it was considered that the microencapsulation method is effective to improve the performances of the hydrogen storage alloy electrodes.

• 한국세라믹학회지
• /
• 제39권7호
• /
• pp.657-662
• /
• 2002

페라이트를 이용한 $CO_2$분해 반응에서 부분 산화로 CO와 $H_2$의 제조가 가능한 C $H_4$를 사용하여 CuF $e_2$ $O_4$와 NiF $e_2$ $O_4$를 환원시킨 후, 환원된 페라이트를 이용하여 $CO_2$분해 반응 연구를 진행하였다. C $H_4$와 페라이트의 환원 반응에서, $700^{\circ}C$부터 $H_2$와 CO가 생성되었으며, 80$0^{\circ}C$까지의 반응에서 페라이트는 산소부족형 철산화물(Fe $O_{1-{\delta}}$(0$\leq$$\delta$$\leq$1))과 금속 Cu와 Ni의 혼합물 상태로 환원되었다. 환원된 페라이트를 이용한 $CO_2$분해 반응에서, 환원된 CuF $e_2$ $O_4$와 NiF $e_2$ $O_4$보다 높은 반응성을 나타내면서 더 많은 양의 $CO_2$를 분해하였다 이 반응에서 $CO_2$분해는 산소부족형 철산화물의 산화에 의해서만 일어났고, 치환된 2가 양이온은 산화되지 않은 금속 상태로 존재하였다. 이와 같은 결과를 통하여 C $H_4$를 이용하여 페라이트를 환원시킨 후, $CO_2$를 분해하는 공정은 $H_2$와 CO 같은 유용한 가스 제조는 물론 이를 이용하여 $CO_2$도 분해할 수 있는 활용가치가 매우 높은 공정으로 평가된다.