• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.858-866
• /
• 1998

Soldering is the usual method used to correct an unstable fixed partial denture framework at patient's try-in; However, presoldering base metal alloys is technique-sensitve and results are unstable because it is difficult to maintain uniform heat distribution and to prevent oxidation of an alloy. A cast-joining technique has been developed by Weiss and Munyon for repair, correction and addition to base metal framework. This joining technique eliminates the problem with presoldering of non-precious frameworks. The object of this study was to 1) compare the relative flexure strength and the joining effectiveness of Ni-Cr-Be cast in two pieces and 'pre-soldered' versus in two pieces and 'cast-joined'. 2) determine the effect of increasing the number of retentive grooves on the face of the cast and 3) determine the effect of the relative matched position of groove patterns on flexure strength. The joining effectiveness can be expressed by the ratio of the mean flexure stress of soldered or cast-joined specimens to that of one-piece cast. Resin rods 3mm in diameter were used as pattern of specimens for one-piece casted, presoldered, and cast-joined groups. Cast-joined specimens had two different patterns of retentive grooves on the joined faces. Type A had cross-shaped grooves 1mm in depth. 0.6mm in width. Type B was the same except for the addition of one more retentive groove. In the experiment connecting cast-joined specimens, half of specimens with type A pattern had their patterns on the faces of paired casts matched with each other as mirror image. With the rest pairs, it was proceeded that one of paired casts turned 45 degrees so that the patterns crossed. Half of specimens with type B pattern also had the patterns matched as mirror image; However, here, one of paired casts turned 90 degrees with the other pairs. Retentive groove in this study lacked the intentional undercuts, in contrast with the suggestion of Weiss and Munyon. The specimens were subjected to four-point flexural loading in an Instron testing machine. The midspan flexural stress was calculated at the point of initial plastic strain as determined from a strip-chart recorder or at the point of failure if this occured at a lower stress level. Within the scope of this study, the following results were obtained. 1. The presoldered group showed flexural strength at least 2 times higher than the cast-joined groups. Its joining effectiveness was 82%. 2. In cast-joined groups, the flexural strength of joints with type B patterns exhibited 1.5 times that of joints with type A patterns. Joining effectivenesses were 38% for type B patterns, 25-26% for type A patterns. 3. The relative matched position of groove patterns did not have any significant effect on flexural strength of the cast-joined specimens with either type A patterns or type B patterns(p>.05).

• Korean Journal of Animal Reproduction
• /
• v.23 no.1
• /
• pp.63-68
• /
• 1999

A 4-year old Korean-native cow of third parturition delivered an deformed calf with congenital anasarca and hypoplasia of the extremity at Muan County in Chonnam Province. At parturition, the dam showed amniotic fluid approximately two times more than that at the normal and also occurred severe dystocia. The anomaly died before parturition was 82 cm long and weighed 25 kg. It was difficult to recognize the neck and face of the anomaly due to severe edema and the stretched tongue through mouth was found. The shape of the extremity was recognizable and the systemic hypoplasia of the body with marked edema was found. At necropsy, there was a large amount of serous fluid both in pleural and peritoneal cavity. Also the fluid was contained some of yellowish granular materials and diffusely was fulfilled in all subcutaneous tissue. There was a partial opening in diaphragm which was resulted in the protrusion of approximately half of liver toward peritoneal cavity. There were two kidneys (15${\times}$21 and 13${\times}$18 cm) on the left which were enlarged and relatively larger than the right one (13${\times}$9 cm). In addition, there were found slight to moderate hepatomegaly and splenomegaly with slight congestion, and diffuse edema of intestinal serosa. Lung (32${\times}$49 mm) with marked hypoplasia was smaller than the size of heart (56${\times}$45mm). Serological test to the dam showed relatively high antibody titer (＞64) to Akabane virus which might be involved in the outbreak of the deformed Korean-native calf as one of many causative agents.

• Health Policy and Management
• /
• v.22 no.1
• /
• pp.1-28
• /
• 2012

Since its establishment in 1948, World Health Organization (WHO) has tried and facilitated international cooperation of public health under the goal of "the highest attainable health," and gained outcomes like the eradication of smallpox and polio, turning itself into the representative of international public health. However, there was discord between member nations during the cold war era, and the status of WHO experienced rise and fall after its establishment. WHO, the representative international health organization, also has not been freed from influences from international regime changes, which means that the discussion on the internal causes of WHO functionings should be expanded more. In this study, functionalism was tested as one of international relations theory that tries to explain the establishment and role of WHO. Especially, this study analyzed the problems and problem-solving process that WHO had to face by using Imber's five steps theory that arranged chronologically the theory of Mitrany. We mainly investigated the secondary source that described historic facts on the rise and fall of WHO in terms of roles and functionings during establishment of WHO, the cold war era, and international cooperation of public health. The roles of WHO were analyzed by selecting the gains of WHO in the post cold war era. The functionalism arrangement of Imber was appropriate to some extent in explaining the establishment and role of WHO. The first step was International Sanitary Conference in 1851 that made nations to recognize international cooperation of public health, and the second step was the establishment of WHO that handles public health as an international organization. Recent cases of the Framework Convention on Tobacco Control and International Health Regulations showed that each nation agreed with an international norm that they had to cooperate each other to tackle infectious diseases and smoking, and this implies that these were emergence of global governance. This process was the third step of Imber's theory (nations had a gain from international cooperation would agree with the expansion of authority of international organization). However, the last two steps of the theory are still not realized. The partial success of WHO was based on the functional elements that WHO deals with non-political elements, human resources centering on professionals, and democratic decision making process. This essential and non-political characteristics mean that necessity of international cooperation catalyzed by WHO would continue despite of the global governance era when global health governance get faced more challenges.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.171-178
• /
• 2018

The ocean is a harsh environment and Korea Coast Guard officers often face the threat of death or going missing in the line of duty. In order to promptly identify unknown bodies during mishaps, Korea Coast Guard Research Center has established an identification system using the DNA of its officers. This collected DNA can also be entombed in National Cemeteries when the remains are not recovered. The storage, disposal and quality control of the materials are overseen by the Governing Committee according to the Enforcement Rules for the Human Biological Materials Storage Project for the Identification of Officers Killed or Gone Missing in Action. Approximately 700 bodies are found per year along the Korean coast. An alternative method should be put in place for when identification through fingerprints and teeth are not applicable due to severe decomposition or partial recovery. We believe it would greatly contribute to helping identify the unknown bodies if the storage project could expand its data to include marine industry workers, relevant researchers and those involved in marine leisure activities.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.77-86
• /
• 2020

The study aims to analyze the compliance and non-compliance of the Korean health authorities regarding WHO's mask use recommendations following the spread of Covid-19, and to suggest the limitations and implications of the recommendations in the prevention of epidemics by deriving the causes of non-compliance with the results of alternative options. To this end, documents related to masks at home and abroad are reviewed, and WHO's mask recommendations and the Korean health authorities' mask guidelines are targeted for analysis. The analysis results are as follows. First, Korea's health authorities have basically accepted and applied WHO's "limited mask user perspective" in two recommendations. Second, Korea's health authorities have implemented differently from WHO mask recommendations due to the lack of supply and demand of masks. Third, Korea's health authorities were able to succeed in the initial prevention of Corona 19 based on the stabilization of the mask supply. Fourth, in the WHO mask recommendations, mask user restriction resulted in partial errors as a recommendation. The implication derived from the analysis is that even international recommendations based on medical evidence need to be allowed to follow autonomous guidelines according to the country's quarantine situation and competence, rather than strict adherence to international rules, in the infectious disease pandemic situation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.4
• /
• pp.99-112
• /
• 2019

The landscape of the education market is changing. As part of efforts to deal with the decrease of a school-age population in Korea, Korean universities and colleges are endeavoring to attract foreign students. Chinese students, the largest share of foreign university students in Korea, are becoming an important element at Korean universities and colleges. Chinese students face various kinds of difficulties while trying to cope with new environments in the country. This study aims to analyze the impact of academic factors and psychological factors of Chinese students on the level of adaptation to university life and their satisfaction with it. Data on 128 Chinese students attending D University located in Busan were collected and a path analysis was conducted using partial least squares (PLS) regression. Research results are as follows. First, professors as an academic factor and the level of interest of university staff have significant impact on the level of adaptation to university life while Korean language proficiency does not have significant impact on the level of adaptation to university life. Second, homesickness as a psychological factor is correlated to the level of adaptation to university life with significance while acculturative stress is not correlated to it. Third, the level of adaptation to university life is correlated to the level of satisfaction with university life. Based on these findings, the significance, limitations and future directions of this study are discussed.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.135-140
• /
• 2019

Lattice towers and tubular steel poles have been commonly used for electrical power transmission in Korea. They are durable, structurally stable, simple and can easily be constructed in limited spaces. However, residents are opposed to construct transmission lattice towers in their areas because they are not visually attractive, and electrical field occur at the transmission lines. Underground transmissions have been used instead of the traditional towers to resolve these problems, however they are not cost effective to construct and run. Therefore, we have developed eco-friendly towers that are more attractive, well blending into the surrounding environment, and much more economical than underground transmissions. There are four categories of the eco-friendly electric transmission towers about design aspects. Firstly, there is decoration type such as tree tower and ensemble tower. Tree tower looks like actual trees with leaves and branches so it blends into surroundings. Ensemble towers were designed after pair of crane birds. Those towers have decoration features and art works. Structural examination and manufacturing this type would be very similar to the conventional transmission towers. Secondly, there is arm design type such as traditional tower. Design features are added to the existing towers. As partial design can be adoptable on these types, it can easily meet height regulations and attach to conventional lattice towers and tubular steel poles. Also, these towers are more economical than others. Third category is multipurpose type such as Sail Tower. These towers have simple pole or tubular structure with features which can be used as information message board, public relations and much more. This type will face greater wind pressure because of the area of the board, also visibility must take into consideration. Lastly, there is moulding type such as arc pylon. It is different shape to the conventional towers - lattice towers and tubular steel poles. Dramatic design changes have been adapted - from a hard and static tower to a soft and curved tower. These towers will well stand out in the field. However, structural examination and manufacturing this type would be difficult and costly. Also certain towers of this type would require scaffolding or false work to construct, which will result in limitations of the construction area. This paper shows KEPCO 154 kV Sail tower in detail. KEPCO 154 kV Sail tower that is included in fabrication of sample tower and tower testing has developed and the results are presented in this paper. We hope that sail tower is also considered as a solution to have public acceptance or to create a familiar atmosphere among towers and people in coastal area.

• The Korean Journal of Franchise Management
• /
• v.13 no.3
• /
• pp.17-30
• /
• 2022

Purpose: Recent emergence of diverse businesses in the distribution industry has led small and medium-sized retailers and their distribution logistics centers to face difficulties. Transactions between companies are connected within a supply chain, and the companies have relationships in the form of a supplier and a buyer. Therefore, it is important to identify causes of problems among companies through supply chain and strategic partnerships, thus developing optimal management plans and maximizing performances of companies. This study proposes that sustainable supply chain management consists of product quality, price quality, distribution quality, and promotion quality based on stakeholder theory and resource-based view. This study examined the impacts of sustainable chain management factors on satisfaction and win-win cooperation. Research design, data, and methodology: In the proposed model, satisfaction plays a mediating role in the relationship between sustainable chain management and win-win cooperation. The data were collected from 245 owners who use small and medium-sized distribution logistics center and analyzed using 2SLS (two-stage least square) with SPSS 28.0. Exploratory factor analysis and correlation analysis were used to assess the validity and reliability of constructs. Results: The findings are as follows. In the case of the total and Nadeulgage samples, product, price, and distribution quality had a significant positive effect on satisfaction, but in the case of Neighborhood super, product and price quality have a significant positive effect on satisfaction. Satisfaction has a significant positive effect on win-win cooperation in the overall, Nadeulgage, and Neighborhood super. Satisfaction plays a partial or full mediating role in the case of total, Nadeulgage, Neighborhood super. Conclusions: This study emphasized the need for sustainable supply chain management of small and medium-sized distribution logistics centers by examining the relationship between small and medium-sized distribution logistics centers and chain stores. It was found that store satisfaction plays an important role in the win-win cooperation between small and medium-sized distribution logistics centers and chain stores. Small and medium-sized distribution logistics centers can maximize product quality, price quality, distribution quality, and promotion quality by understanding the effect of chain store-related satisfaction and win-win cooperation on chain stores.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.5
• /
• pp.245-259
• /
• 2020

The development of technology and the advent of a non-face-to-face society are expected to have a direct impact on job problems. In line with this phenomenon, the government and education and training institutions are coping with job problems through the start-up support policy while at the same time inducing the creation of innovative companies. In particular, youth start-up support can be expected not only to compensate for market failures, but also to promote high-growth start-ups. Based on this background of research, this study examined the competency of young entrepreneurs to start their own businesses, their entrepreneurial self-efficacy, and their impact on success and satisfaction of start-ups. Based on the theoretical research, the research theory and research model were derived by setting entrepreneurial self-efficacy as a mediating variable after reviewing the relation between the main elements of start-up competency of young start-up entrepreneurs and start-up performance. The Youth Entrepreneurship Competency was divided into four categories: Entrepreneurial Competencies, Technical Competencies, Management Competencies, and Creative Competencies, and the hypothesis was that each had a significant impact on the start-up performance through the mediating effect of entrepreneurial self-efficacy. A survey was conducted on young entrepreneurs in their 20s and 30s in Korea for empirical research, and the analysis results were as follows. First of all, the competency of young entrepreneurs to start their own businesses affects the success of start-ups and the satisfaction of start-ups. There are differences in the competencies, and both technical and management competencies can be seen through the entrepreneurial self-efficacy to enhance the success of start-ups and the satisfaction of start-ups. Entrepreneurial competency was fully mediated to start-up success and partially mediated to start-up satisfaction. In the case of creative competency, there were only direct effects on successful start-ups, and the satisfaction of start-ups showed partial mediating effects. Thus, seven of the eight detailed hypotheses were supported and one was rejected. Based on the above findings, the implications were presented.

• Conservation Science in Museum
• /
• v.19
• /
• pp.1-18
• /
• 2018

The Stele for National Preceptor Hongbeop from the Jeongtosa Temple site in Chungju is one of the most important stone cultural heritage items for exemplifying the style of the Goryeo era. Despite its obvious value, this relic has been stored in a weathered condition at the National Museum of Korea. It had suffered various dismantling and displacements during the Japanese colonial period and had long been exposed in the open air. The stele was selected as a subject for the Stone Monuments Restoration Project launched by the National Museum of Korea in 2015. In preparation for its outdoor exhibition as part of the restoration project, this study investigated the characteristics of its materials, produced a map of its deterioration from weathering, and carried out ultrasonic analysis of the materials to provide findings useful for conservation treatment. The materials analysis revealed that the turtle-shaped pedestal of the stele was made from two-mica granite consisting of medium-grained quartz, plagioclase, alkali feldspar, biotite, and muscovite. Its body stone is crystalline marble, the rock-forming mineral in which is medium-grained calcite in a rose-pink color with dark grey spots. The dragon top of the stele is made of crystalline marble, the major component of which is medium-grained calcite of a light-grey color. The deterioration consists of 21.5% abrasion on the stone body, with its south face most damaged, and 18.6% granular disintegration, with the north face most damaged. The ultrasonic material characterization conducted for mapping the general condition of weathering shows low values on the parts-assembly area of the turtle-shaped pedestal and on the upper portion of the stone body. It is considered that there is dislocation due to partial blistering and fracturing as well as to the differences in surface treatment. Prior to the outdoor exhibition of the stele, the surface was cleaned of contaminants and was consolidated based on the scientific investigation in order to prevent weathering from the external environment.