• Title/Summary/Keyword: partial efficiency

Search Result 705, Processing Time 0.027 seconds

Numerical Analysis for Separation of Carbon Dioxide by Hollow Fiber Membrane with Cocurrent Flow (병류흐름의 중공사 분리막에 의한 이산화탄소 분리 수치 해석)

  • Lee Yong-Taek;Song In-Ho;Ahn Hyo-Seong;Lee Young-Jin;Jeon Hyun-Soo;Kim Jeong-Hoon;Lee Soo-Bok
    • Membrane Journal
    • /
    • v.16 no.3
    • /
    • pp.204-212
    • /
    • 2006
  • A numerical analysis was carried out for separation of carbon dioxide from carbon dioxide/nitrogen gas mixture by a polyethersulfone hollow fiber membrane which has shown a good stability against plasticization by carbon dioxide and an excellent separation efficiency fur carbon dioxide from its gas mixture. A computer program for carbon dioxide separation was developed using the Compaq Visual Fortran 6.6 software. Governing module equations were thought to be an initial-value problem and the nonlinear ordinary differential equations were simultaneously solved using the Runge-Kutta-Verner fifth-order method. From results of numerical analysis, the carbon dioxide partial pressure of the feed stream, the pressure ratio of the feed side to the permeate side and the feed gas residence time at the inside of a membrane were found to be very important factors to affect the permeation characteristics of carbon dioxide.

Fast Inter Block Mode Decision Using Image Complexity in H.264/AVC (H.264/AVC에서 영상 복잡도를 이용한 고속 인터 블록 모드 결정)

  • Kim, Seong-Hee;Oh, Jeong-Su
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.11C
    • /
    • pp.925-931
    • /
    • 2008
  • In video coding standard H.264/AVC, variable block size mode algorithm improves compression efficiency but has need of a large amount of computation for various block modes and mode decision. Meanwhile, decided inter block modes depend on the complexity of a block image, and then the more complex a macroblock is, the smaller its block size is. This paper proposes fast inter block mode decision algorithm. It limits valid block modes to the block modes with a great chance for decision using the image complexity and carries out motion estimation rate-distortion optimization with only the valid block modes. In addition to that, it applies fast motion estimation PDE to the valid block modes with only the $16{\times}16$ block mode. The reference software JM 9.5 was executed to estimate the proposed algorithm's performance. The simulation results showed that the proposed algorithm could save about 24.12% of the averaged motion estimation time while keeping the image quality and the bit rate to be -0.02dB and -0.12% on the average, respectively.

Fabrication of Thick SmBCO/IBAD-MgO coated conductor (후막 SmBCO/IBAD-MgO 초전도 박막선재의 제조)

  • Lee, J.H.;Kang, D.K.;Ha, H.S.;Ko, R.K.;Oh, S.S.;Kim, H.K.;Yang, J.S.;Jung, S.W.;Moon, S.H.;Youm, D.;Kim, C.J.
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.05a
    • /
    • pp.9-9
    • /
    • 2009
  • Coated conductor is required to have good critical current property for high efficiency of electric power applications. Until now, long coated conductor does not show high Jc over 3 MA/$cm^2$ in thick superconducting layer because of texture degradation by thick superconducting layer. In this study, in order to overcome this issue, thicker superconducting layer was deposited with optimized conditions to reduce the degradation of critical current density. SmBCO superconducting coated conductor was deposited with 1~3 um of thickness at $750\sim850^{\circ}C$ under 15~20 mTorr of oxygen partial pressure using batch type EDDC( evaporation using drum in dual chamber). The buffered substrate for superconducting layer deposition was used IBAD-MgO template with the architecture of $LaMnO_3/MgO/Y_2O_3/Al_2O_3$/Hastelloy. After fabrication of coated conductor, critical current was measured by 4-prove method under self-magnetic field and 77K. In addition, surface morphology and texture were analyzed by SEM and XRD, respectively. 3 um thick SmBCO coated conductor shows highest $I_C$ values of 638A/cm-w in 1 m long in the world.

  • PDF

System Design for the Safe store and Issue Service Assurance of the E-Document (전자문서의 안전한 보관 및 발급 서비스 확보를 위한 시스템 설계)

  • Sung, Kyung-Sang;Kim, Jung-Jae;Oh, Hae-Seok
    • Journal of the Korea Society of Computer and Information
    • /
    • v.13 no.6
    • /
    • pp.173-180
    • /
    • 2008
  • Certified e-Document Authority keep it with protection legal as a system a guarantee and identifies originality of an e-Record, It presume to be authenticity e-Records and contents of an e-Record prove what was not changed. But, e-Records has high medium degree of dependence and loss danger of information has very high problems. In addition, Because correction(attachment and deletion) and a revision of information are easy, a problem for integrity and the originality of an e-Record is caused. Existing system show the following inefficient. For the originality guarantee, an existing e-Documents encryption method accomplishes a encrypted process of a whole document with a symmetric key, if the information revised midway, the whole documents content must accomplish re-scanning and re-encryption process again. To get over such inefficient, this paper maximize efficiency which occurred at the time of partial information revision request by encryption and managing using the link information based on the linkage characteristics of the each page on the registered requested e-Documents, It was able to increase security configuration by minimizing problems on an information exposure through increasing complicated of the key management.

  • PDF

An Analysis of the Relationship of Soil Factors to the Height Growth of Pinus densiflora within the Young Natural Stands in Central Korea (중부한국의 자연생 소나무의 연 신장성장율에 영향을 미치는 토양요인들에 대한 다요인 분석)

  • 오계칠
    • Journal of Plant Biology
    • /
    • v.15 no.4
    • /
    • pp.1-12
    • /
    • 1972
  • To study on the annual height growth of Pinus densiflora within natural pine stands in central Korea, twenty two pure closed Pinus densiflora stands were selected subjectively in the west-central region of Korea. In each stand twenty trees were chosen randomly. For each tree, abotu ten to fifteen measurements of internodal lengths were made from leader top to trunk base. A total of one hundred thirty four soil samples was collected. Each soil sample was bulked with three subsamples. The ranges of the growth measurements per stand, per tree and per observation were 14.9-35.4cm, 9.0cm-54.4cm and 2.4cm-69.0cm respectively. The total mean value was 23.5cm. The Student-Newman-Keul's tests for the multiple comparison among the mean values of the height growth per stand were very highly significant. The resutls of the analysis of variance of the height growth data for the selected fifteen stands among the twenty two stands indicate that sampling efficiency might be increased to 744% if measurement of the growth were made on fifteen trees per stand from twenty stands instead of twenty trees per stand from fifteen stands. The annual height growths of Pinus densiflora and Pinus koraiensis for the period from 1960 to 1968 were 21.74$\pm$5.29cm (10) and 20.56$\pm$5.59cm (10) respectively. The total means of easily-soluble phosphorus, total nitrogen, loss on ignition and pH for the soil samples were 2.8 ppm, 0.09%, 5.4% and 4.7 respectively. The ranges of those amounts were 18.7-1.7ppm, 0.17-0.05%, 11.6%-3.1%, 3.9-5.1 respectively. The relationship of the annual height growth of P. densiflora to soil was studied in terms of standard partial multiple regression. Among soil properties such as non-capillary pore space, capillary pore space, maximum field capacity, loss on ignition, soil reaction, total nitrogen and easily-soluble phosphoros investigated, the easily soluble phosphorus in one analysis and loss on ignition and soil reaction in the other analysis seem to have significant positive influence on the annual height growth.

  • PDF

Study on Recycling Technology of Waste Artificial Marble using Starch (전분을 이용한 폐인조대리석의 재활용 기술에 관한 연구)

  • Ryoo, Keon Sang
    • Journal of the Korean Chemical Society
    • /
    • v.62 no.6
    • /
    • pp.433-440
    • /
    • 2018
  • The pyrolysis has been universally applied to recycle the waste artificial marble. However, the existing heat treatment equipment has relatively low heat transfer efficiency into the inner part of the waste artificial marble. Besides, it leads to unnecessary excessive gas during the partial carbonization of the polymethyl methacrylate (PMMA) and raises the risk of fire due to heat at an extremely high temperature. This study suggests the process of pyrolysis at the formation state after adding the starch to waste artificial marble to overcome above-mentioned problems. As the result of experiments, this method showed that the pyrolysis of waste artificial marble was greatly improved at comparatively low temperature condition of $350^{\circ}C$. Moreover, it also manifested the effect on securing the stability and energy savings necessary for the recovery of methyl methacrylate (MMA) and ${\alpha}$-alumina (${\alpha}-Al_2O_3$).

Geometry Transformation in Spatial Domain Using Coefficient Changes in Frequency Domain toward Lightweight Image Encryption (주파수 영역에서의 계수 값 변환에 의한 공간 영역에서의 기하학적 변환과 이를 이용한 이미지 경량 암호화)

  • Joo, Jeong Hyun;Yi, Kang
    • Journal of KIISE
    • /
    • v.42 no.2
    • /
    • pp.162-168
    • /
    • 2015
  • Image data is mostly stored in compressed form because of its huge size. Therefore, a series of cumbersome procedures is required to apply a transformation to image data: decompression, extraction of spatial data, transformation and recompression. In this paper, we employ DCT(Discrete Cosine Transform) coefficients to change the spatial presentation of images. DCT is commonly used in still image compression standards such as JPEG and moving picture compression standards such as MPEG-2, MPEG-4, and H.264. In this paper, we derived mathematically the relationship between the geometry transformation in the spatial domain and coefficient changes in the DCT domain and verified it with images in the JPEG file format. Because of the efficiency of transformation in the frequency domain, our findings can be utilized for light-weight partial image encryption for privacy data protection or entertainment contents protection.

Effects of High Pressure/High Temperature Processing on the Recovery and Characteristics of Porcine Placenta Hydrolysates

  • Lee, Mi-Yeon;Choi, Ye-Chul;Chun, Ji-Yeon;Min, Sang-Gi;Hong, Geun-Pyo
    • Food Science of Animal Resources
    • /
    • v.33 no.4
    • /
    • pp.474-480
    • /
    • 2013
  • This study was performed to investigate the effects of high pressure/high temperature (HPHT) treatment on the recovery efficiency and characteristics of porcine placenta hydrolysates. The placenta hydrolysates were characterized by solubility, free amino acid contents, gel electrophoresis, gel permeation chromatography (GPC) and amino acid composition. Placenta was treated at 37.5 MPa of pressure combined with various temperatures (150, 170, and $200^{\circ}C$) or various holding times (0, 30, and 60 min at $170^{\circ}C$). Insoluble raw placenta collagen was partially solubilized (> 60% solubility) by the HPHT treatment. Free amino group content of placenta collagen was increased from 0.1 mM/g collagen to > 0.3 mM/g collagen after HPHT treatment, reflecting partial hydrolysis of collagen. The molecular weight ($M_w$) distribution showed evidence of collagen hydrolysis by shifting of $M_w$ peaks toward low molecular weight when treated temperature or holding time was increased. Alanine (Ala), glycine (Gly), hydroxyproline (Hyp), and proline (Pro) contents increased after the HPHT treatments compared to a decrease in the others. In particular, the increase in Gly was obvious, followed by Hyp and Pro, reflecting that placenta hydrolysates were mainly composed of these amino acids. However, increasing temperature or holding time hardly affected the amino acid compositions. These results indicate that the HPHT treatment is advantageous to hydrolyze collagen derived from animal by-products.

An Efficient Method for Estimating Optimal Path of Secondary Variable Calculation on CFD Applications (전산유체역학 응용에서의 효율적인 최적 2차 변수 계산 경로 추정 기법)

  • Lee, Joong-Youn;Kim, Min Ah;Hur, Youngju
    • The Journal of the Korea Contents Association
    • /
    • v.16 no.12
    • /
    • pp.1-9
    • /
    • 2016
  • Computational Fluid Dynamics(CFD) is a branch of fluid mechanics that solves partial differential equations which represent fluid flows by a set of algebraic equations using computers. Even though it requires multifarious variables, only selected ones are stored because of the lack of storage capacity. It causes the requirement of secondary variable calculations at analyzing time. In this paper, we suggest an efficient method to estimate optimal calculation paths for secondary variables. First, we suggest a converting technique from a dependency graph to a ordinary directed graph. We also suggest a technique to find the shortest path from any initial variables to target variables. We applied our method to a tool for data analysis and visualization to evaluate the efficiency of the proposed method.

A Study on a New SIP Presence Service using Partial Publication and Extended Call Processing Language (부분 Publication 및 확장 호처리언어를 사용한 새로운 SIP 프레즌스 서비스에 관한 연구)

  • Lee, Ki-Soo;Jang, Choon-Seo;Jo, Hyun-Gyu
    • The Journal of the Korea Contents Association
    • /
    • v.7 no.3
    • /
    • pp.34-41
    • /
    • 2007
  • The presence service which provides user's presence information by subscription and notification is one of SIP(session initiation protocol) extension services, and it is used importantly in VoIP(Voice over IP) and Instant Messaging service. In this paper, we propose a new method in which users can combine and control presence service and call processing services in various ways by extending call processing language, and only changed parts of the presence information are published instead of full presence information document. Each user registers full presence information document with his own call processing script during the first publication to a presence server. The presence server executes these call processing scripts, so it can provide various services with combination of presence service and call processing services during the presence subscriptions and notifications. Afterwards, users publish only changed parts of the presence information and the presence server notify only these changed parts to watchers. Therefore the efficiency of the overall system can be improved. The performance of our proposed model is evaluated by experiments.