• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.194-195
• /
• 2015

Methods for measuring the physical workload of construction workers are classified into posture assessment techniques (i.e., OWAS, RULA, etc.) and physiological measurement techniques (i.e., EMG, heart rate, etc.). The one does not quantify the workload on a specific body part of a worker by considering the weight of the hand tools or materials on hand and time for holding a particular posture. This paper presents a procedure for evaluating a physical demand using the electromyography (EMG) sensor. This study compares the EMG measurement and the posture assessment. The case study is carried out on a masonry operation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.2
• /
• pp.101-110
• /
• 2007

This study was performed to find out hazardous factors in the loaded works of muscular skeletal disorders(MSDs) for four company attached to dining workers from October 2005 to June 2006. The results are summarized as follows. 1. 42.5% of workers in study group were 40-50 years old, and females were higher than males, and the average of body weight was 70kg, 57kg in males and females, respectively. Working time per day was mostly 7-9hours, and the rate of worker who had never education and training was 46%. 2. The upper part and right part of body were higher than lower part and left part in symptoms of muscular skeletal disorders. Body parts which complained of symptoms were the order of right shoulder(55%), right arm(54%), right hand,(40%) waist(35%), leg(25%), and neck(24%). 3. The results of evaluation in the loaded works of muscular skeletal disorders to cooking, dish supply, preparing side dish, and washing the dishes and cleaning the floor of cooking room using RULA and OWAS checklists was action level 4(potential hazards, needs of change workplace), and the result of evaluation using back compressive force needed control measures as 779.27 lbs~1,274.04 lbs. In a view point of the result of this study, large dining rooms should be designed by ergonomic technology for the work surface height, width, and depth. The height of carrying car should be lower to 70cm, and repetitiveness and handling weight should be reduced by mechanical means, and education and training also should be performed for all of workers positively.

• Korean Journal of Occupational Health Nursing
• /
• v.24 no.1
• /
• pp.39-47
• /
• 2015

Purpose: This study is performed to help manage the metabolic syndrome in work place by identifying the effect on metabolic syndrome with subjects of Korean adult workers. Methods: Using part of data of "The Fourth Korean National Health and Nutrition Examination survey 2nd year (2008)" which center for disease control is investigating. The general characteristics include age, educational level, occupation and marital status as factors affecting the metabolic syndrome of workers in this study. Results: Work-related factors are the working environment in which they are working while they are pressed for time due to work status and overload. If the work status of worker is unpaid family member, the risk is increased by more than twice compared to paid workers. The risk for metabolic syndrome in work environment to work while fighting the clock is decreased compared to the work environment without time pressure. Conclusion: In order to manage the metabolic syndrome of workers, health promotion program to change management of both working condition and working environment can contribute to prevent the metabolic syndrome and ultimately prevent the cerebrocardiovascular diseases.

• Journal of Family Resource Management and Policy Review
• /
• v.12 no.4
• /
• pp.79-102
• /
• 2008

The aims of this article were to examine the basic law, contents and concept of educational program for healthy family and provide the jobs and competency of healthy family supporter for educational work. The research objects were 53 healthy family supporters for educational work inclusive of full-time and part-time position. They was analyzed through the survey. The process of research consisted of two parts. One was to suggest their jobs and requirements, the other were to offer their core competency and area for improvement. First, the jobs of healthy family supporters for educational work were the planning and valuation of program. The requirements for the performance of their duties are having a bachelor's degree or a master's degree, career for 1-3years, and a certificate of qualification of healthy family supporters, social worker and family counselor. Second, their competencies were the understanding of education for family life, management for healthy family support center, planning and valuation of educational program, a theory of counsel, community networking, ability of documentation, sociality, communication skill, the ability of solving the problem, the adaptation of various environments, receptiveness, positiveness and so on.

• Journal of Agricultural Extension & Community Development
• /
• v.18 no.4
• /
• pp.861-877
• /
• 2011

The purpose of this study is to survey job stress and Musculoskeletal Disorder(MSDs) of workers in small plants with agricultural products. The subjects were comprised of 69 workers participated in "Helping the rural women to get the small businesses" project. The questionnaire surveys were Korean Occupational Stress Scale(KOSS), and Legal Risk Assessment of Musculoskeletal Disorders(KOSHA CODE H-30-2003). As a result of the survey, scores of KOSS 8 sub-items except for job demand were similar to that of Korea workers. Prevalence of MSDs symptoms of small plants workers was high percent (44.9%). And the rate according to kinds of product was significant difference at neck (p<0.01), lumbar (p<0.01), and leg (p<0.01). There was no significant difference between view person sign of MSDs and non MSDs according to sex, year, the number of workers, working years, working time per one day, rest time per one day, and subjective working intensity, but there were significant difference between high stress group and low stress group about MSDs at interpersonal conflict(p<0.05). Job stress and MSDs were important factor to workers of small plants producted agricultural products. Therefore, starting a business with small plats, workers consider interpersonal conflict and body part showing MSDs.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.6
• /
• pp.109-115
• /
• 2019

Smart Factory is a part of and a key point of the 4th industrial revolution. It performs optimization from the whole viewpoint, using comprehensive data of the post-process data by utilizing various sensors, controllers, and mobile devices beyond the existing factory automation level. In this paper, we design and implement an IoT platform that can detect the safety factors of the workers, the environmental factors of the factory, and real time monitoring at the control center, among the fields to implement smart factory. To accomplish this, we construct a monitoring device that provides sensor information control, server transmission of sensor information, and visualization of collected information. By using this system, it is possible to maintain the temperature and humidity for the optimum working environment in the factory. and also, By using the beacon, it is possible to measure the working time of the worker and trace the position.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.60-65
• /
• 2006

It is a well known fact that LCD is a central part of the IT industry which is important in the present and the future. But the biggest problem of LCD manufacturing is maintaining a cleaning room environment and administration. Therefore the purpose of this study is to first, prevent the yield depreciation and damage of products, and second, protect the worker ftom accidental electrostatic discharge during LCD manufacture. The soft x-ray ionizer is a type of electrostatic reducer device. It protects against electrostatic discharge in the cleaning room environment and is a necessary environmental factor during LCD production. The positive aspects of the soft x-ray are its shorter time and wider angle of exposure. But the negative aspect of the soft x-ray is its need for several shielding of protection from the harmful x-ray exposure. On this study, the development of the Air Nozzle-type ionizer to amend and refine some problems. For example, examined the electrostatic reduce device of a soft x-ray type and discovered the ion did not go inside well. also workers to be free from danger. An Air Nozzle-type ionizer is comprised of soft x-ray radiation and ionized air production. Air is injected through the nozzle after being ionized from radiation. It supplies air keeping the same pressure into the end foundation of ion production. The soft x-ray is the structure which radiates ionized air through the nozzle (21 holes) having micro holes of the ionizable radiation after ionizing the inside air by the ion production. A worker does not need a cover to protect against x-rays and the Air Nozzle-type ionizer is easy to set up and is more effective at eliminating electrostatic.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.231-244
• /
• 2017

Objective: This study aims to understand the occupational injury characteristics of the workers in the motor vehicle parts (automobile parts) manufacturing industry and to present basic guidelines on accident prevention through accident analysis. Background: There occur many occupational injuries in the motor vehicle parts manufacturing industry. But there were few researches for the occupational injuries of the workers in the motor vehicle parts manufacturing industry. Method: This study analyzed the data of occupational injuries of 1,609 workers in the motor vehicle parts manufacturing industry in 2015. The accident characteristics were analyzed by dividing them into worker related factors and accident related factors. Results: Among the occupational injuries of the workers in the motor vehicle parts manufacturing industry, 80.6% of the victims were males, 64.0% were older than 40. 57.8% of the victims were employed by the companies with less than 50 workers. In addition, there was a difference in accident characteristics according to age, work experience, employment type, events or exposures, accident time of the day, agents, natures of injuries and illnesses, injured organs and injured body part. Conclusion: It is important to prevent equipment/machinery accidents. For this purpose, more efforts should be made to establish safety measures faithful to the basics of safety devices and safety work procedures. It is also suggested that prevention of disasters should be intensively carried out for workplaces with less than 50 employees and middle-aged and elderly people. Application: The result can be used to present guidelines for preventative measures for the workers in the motor vehicle parts manufacturing industry including safety education/training.

• Quality Improvement in Health Care
• /
• v.19 no.2
• /
• pp.80-88
• /
• 2013

Objectives: With the increase in the number of people who are marginalized in receiving medical services, the role of Seoul National University Hospital as a public hospital is being emphasized. However, many patients are either experiencing delays in receiving medical services or simply being left out as a result of the inaccessibility to the department of social work on part of both the patients and the medical staff. Methods: In order to increase consultation from other departments and the accessibility to the department of social work for the socially marginalized group through early consultation from other departments, the following steps were taken. First, an orientation program for novice medical residents led by clinical social worker was introduced/implemented. Second, posters and brochures on various financial aids programs were produced and distributed. Third, a system of early screening was built/constructed, and once a week rounds and early screening meeting were executed/carried out. Result: The department of social work's rate of consultation from other departments increased by 4.4% compared to last year, while it showed 61% increase for those wards that had an early screening meeting. In addition, the average time of consultation from other departments was reduced by 3.1 days, securing sufficient amount of time for clinical social work services, both in terms of quality and quantity. Conclusion: It is believed that the various promotional activities, along with the strengthening of accessibility to clinical social work services and early consultation on part of social disadvantaged/marginalized group, would undoubtedly help provide quality services to patients and increase their level of satisfaction. In this way, the wards can effectively reduce the number of unnecessary hospital stay days while the hospital can prevent the accumulation of outstanding bills/fees as well as contribute to the publicness of hospitals. The promotion of clinical social work programs in various ways are crucial to ensuring the satisfaction of patients and hospital staff.

• Journal of Korean Society for Quality Management
• /
• v.50 no.4
• /
• pp.793-810
• /
• 2022

Purpose: As improving the search performance of aviation security equipment is considered essential, this study proposes the need for research on how to find an optimized test sequence that can reduce test time and operator power during the search function test of explosive detection systems. We derive the weights and work difficulty adjustment factor required to find the optimized test order. Methods: First, after setting the test factors, the time of each test and the difficulty scale determined by the worker who performed the test directly were used to derive weights. Second, the work difficulty adjustment coefficient was determined by combining the basic weight adjustment factor and corresponding to the body part used by the test using objective rating. Then the final standard time was derived by calculating the additional weights for the changeability of the test factors. Results: The order in which the final standard time is minimized when 50 tests are performed was defined as the optimized order. 50 tests should be conducted without duplication and the optimal order of tests was obtained when compared to previously numbered tests. As a result of minimizing the total standard time by using Excel's solver parameters, it was reduced by 379.14 seconds, about 6.32 minutes. Conclusion: We tried to express it in mathematical formulas to propose a method for setting an optimized test sequence even when testing is performed on other aviation security equipment. As a result, the optimal test order was derived from the operator's point of view, and it was demonstrated by minimizing the total standard time.