• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.4
• /
• pp.223-230
• /
• 2020

Purpose : The purpose of this study was to examine the effects of tools (i., extracorporeal shock wave therapy, massage gun, and foam roller) on range of motion, muscle tone and pain threshold among patients with hamstring stiffness. Methods : Fourteen participants with hamstrings stiffness were recruited. Interventions were performed 6 times, and each session was for 30 seconds using the three tools. The range of motion, muscle tone, and pain threshold were measured. The order of the use of the three tools was randomly determined. The foam roller was made to move from the bottom of the hip crease to the upper part of the back of the hamstring. Additionally, velocity 5 vibration stimulation was performed on the hamstring using a massage gun. Moreover, vibration stimulation was performed on the hamstring with extracorporeal shock wave therapy 5 minutes, 5 Hz, and 1,500 strokes. The flexibility of the posterior thigh muscle was based on maintaining the knee and hip joints in a 90 ° bend in the supine position. The joint angle of the knee was measured, when the knee was actively extended, at the maximum point where the posterior thigh muscle was stretched. The elasticity of the posterior thigh muscle was measured while the subject was prone and in a relaxed state without any force. Measurements were made at the muscle abdominal area of the semitendinosus muscle of the posterior femur, and the area to be measured was marked with a pen. The measurement of the tenderness threshold of the posterior femur was measured using a tenderness meter(Commander Algometer, J-Tech, USA). The force value at the point at which the pressure sensation change to pain was measured after applying vertical pressure to the posterior femur muscle, which was the halfway point between the ischial tuberosity and the popliteal surface of the subject lying on their stomach. Results : The extracorporeal shock wave therapy increased stiffness and, muscle tone, and caused changes in the pain threshold, whereas the other two tools had no effect on these indices. Conclusion : Extracorporeal shock wave therapy has important effects on range of motion and muscle stiffness and can be used in warmup protocols.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.51-59
• /
• 2011

With the increased demand for membrane structures in recent years, there have been many studies of their mechanical properties, to the extent that such structures have become recognized as independent structures with a level of safety and durability comparable to those of other general structures. But in reality, the study for the maintenance of membrane structures has not been as active. In particularly, the study of watertightness from the perspective of maintenance has been very limited. Accordingly, a study on securing watertightness performance and the guidelines for maintenance is necessary. In this study, through a case study of water leakage accidents in membrane structures overseas, causes of leakage were selected from the membrane material itself, joint parts and open door of roof part in membrane structure. The water leakage and deterioration elements were analyzed from those leakage causes. The degree of importance of the water leakage and deterioration index was also designated using the AHP (Analytic Hierarchy Process) method. As a result, the basic technical index was suggested for the maintenance of the roofs of large-span membrane structures to prevent water leakage. This index will be used to make a guideline for the long-term maintenance of the roofs of large-span membrane structures.

• The Journal of Engineering Geology
• /
• v.23 no.2
• /
• pp.149-160
• /
• 2013

Volcanic activity commonly creates a highly complicated volcanic complex due to the admixture of lava flow and sedimentation of volcanic ash. The Song-Gok site is composed of volcanic rocks that collapsed at the lower part of the slope, in combination with several discontinuities in and around a fault. The results of projection analysis indicated the possibility of plane, wedge, and toppling failure in the failure section. The results of discontinuity modeling using the Distinct Element Method (DEM) revealed a total displacement of 207 mm and a joint shear displacement of 114 mm. The yield surface zone was verified at the fault plane of the failure section. In geotechnical terms, volcanic rock slopes are characteristically vulnerable to failure because of differential weathering among the various rock types, the effect of groundwater based on the permeability of the rocks, and the presence of systematic joints generated by the cooling and contraction of lava. When considering the stability of a volcanic rock slope, it is necessary to consider data such as the geological features of the rock, as obtained through detailed geological survey, and variations in discontinuities and rock blocks.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.59-64
• /
• 2012

Welding is an essential process in the automotive industry. Most welding processes that are used for auto body are spot welding and $CO_2$ welding are used in a small part. In production field, $CO_2$ welding process is decreased and spot welding process is increased due to welding quality is poor and defects are occurred in $CO_2$ welding process frequently. But $CO_2$ welding process should be used at robot interference parts and closed parts where spot welding couldn't. Because of the 0.65mm ~ 2.0mm thickness steel sheet were used in the automotive industry, poor quality of welding area such as burn through and under fill were happened frequently in $CO_2$ process. In this paper, we will study about the penetration depth which gives a huge impact on burn through changing a degree of base metal, welding position and torch angle. Voltage, current and welding speed were fixed but degree of base metal, welding position and torch angle were changed. And Cold- Rolled(CR) steel sheet was used. Penetration depth was analysed by multiple regression analysis to derive approximate calculations. And reliability of approximate calculations were confirmed through additional experiments. As the results of this research, we confirmed the effect of torch and plate angle to bead shape. And we present a possibility that can simulate more accurate to weld geometry, as deduced the verification equations that has tolerance of less than 21.69%.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.389-394
• /
• 2015

There is a progressive development in the medical imaging technology, especially of descriptive capability for anatomical structure of human body thanks to advancement of information technology and medical devices. But however maintenance of correct posture is essential for the medical imaging checkup on the shoulder joint requiring rotation of the upper limb due to the complexity of human body. In the cases of MRI examination, long duration and fixed posture are critical, as failure to comply with them leads to minimal possibility of reproducibility only with the efforts of the examiner and will of the patient. Thus, this study aimed to develop an auxiliary device that enables rotation of the upper limb as well as fixing it at quantitative angles for medical imaging examination capable of providing diagnostic values. An auxiliary device has been developed based on the results of precedent studies, by designing a 3D model with the CATIA software, an engineering application, and producing it with the 3D printer. The printer is Objet350 Connex from Stratasys, and acrylonitrile- butadiene-styrene(ABS) is used as the material of the device. Dimensions are $120{\times}150{\times}190mm$, with the inner diameter of the handle being 125.9 mm. The auxiliary device has 4 components including the body (outside), handle (inside), fixture terminal and the connection part. The body and handle have the gap of 2.1 mm for smooth rotation, while the 360 degree of scales have been etched on the handle so that the angle required for observation may be recorded per patient for traceability and dual examination.

• Animal Systematics, Evolution and Diversity
• /
• no.nspc5
• /
• pp.29-46
• /
• 2005

As a commemorative joint survey for the 20th anniversary of the Korean Society of Systematic Zoology, molluscan fauna of Jindo Island was investigated from the materials collected from 3 localities of Jindo Island from 29th to 30th of June, 2004. A total of 77 species of 37 families were identified. Among them, 26 species of 18 families are reported for the first time in this area, including Onchidella kurodai (Taki, 1935) that is new to Korean fauna. For O. kurodai, external morphologies were described in detail with illustrations. Combining the present data with those of the previous works revealed that a total of 115 species from 43 families have been recorded in Jindo Island and its adjacent areas thus far. From a biogeographic point of view, some gastropod species (Bittium craticulatum, Mocroschisma dilatatum, Cantharidus japonicus, C. callichroa, Homalopoma sangarense, and Crepidula onyx) encountered from Jindo Island were the species previously recorded in the southern and/or eastern offshores of Korean peninsula, including Jeju Island (Choe, 1992). Along with the fact that Jindo Island contains a large number of molluscan species ranging over the Yellow Sea coast, this finding is another line of evidence supporting the Kim and Kwon (1983)'s idea that this area is an overtopping zone of marine organisms which dwell in both the Yellow sea and southern part of Korean sea waters. No comprehensive faunistic survey was not made in the present study. We expect that further supplementary study would generate more biogeographic and faunistic knowledges than what we understand through the present study.

• The Journal of the Korean bone and joint tumor society
• /
• v.6 no.2
• /
• pp.98-105
• /
• 2000

In the case of osteosarcoma, secondary acute myeloid leukemia which occurs as the consequences of the complication of chemotherapy, is rare. We are reporting the case that we have recently experienced in the laboratory. A case of secondary acute myeloid leukemia have been occurred to among 77 patients who have been diagnosed as osteosarcoma and received chemotherapy from 1995 to 1999. This case was compared with the cases of other reports for the analysis of its cause and results. A 17-year-old man was diagnosed as a osteosarcoma in the distal part of femur, and recieved chemotherapy. Within 28months, the hematological analysis of the case indicated the severe increase in the number of the white cell (over 200,000) and the profound decrease in the number of platelets. A test of bone marrow needle aspiration and peripheral blood smear showed a tremendous increase in the number of the monocytoid immature cell, which mostly are blasts and promonocytes. Due to this clinical results, the case was diagnosed as the secondary acute myeloid leukemia after the chemotherapy. The frequency of occurrence of secondary acute myeloid leukemia after chemotherapy is quite phenomenal. But the disease could be fatal leading to a high rate of morbidity and mortality without early diagnosis and treatment. Hence, an enough recognition of the possibility of its development, the periodical observation and inspection after chemotherapy and an immediate treatment in the case of occurrence are essential.

• Journal of Veterinary Clinics
• /
• v.20 no.4
• /
• pp.443-448
• /
• 2003

To determine whether localization of tartrate-resistant acid phosphatase (TRAP) and cathepsin K was associated with rupture of the cranial cruciate ligament (CCL) in dogs. Tissue specimens were obtained from 30 dogs with CCL rupture during surgical treatment, 8 aged normal dogs, and 9 young normal dogs that were necropsied for reasons unrelated to this study and unrelated to musculoskeletal disease. The cranial cruciate ligament was examined histologically. $TRAP^+$ cells and cathepsin $K^+$ cells were identified by histochemical staining and immunohistochemical staining respectively. TRAP and cathepsin $K^+$ were co-localized within the same cells principally located within the epiligamentous region and to a lesser extent in the core region of ruptured CCL. Localization of $TRAP^+$ cells (P < 0.05) and cathepsin $K^+$ cells (P =0.05) within CCL tissue was significantly increased in dogs with CCL rupture, compared with aged-normal dogs, and young normal dogs (P < 0.05 - TRAP, P < 0.001 - cathepsin K). Localization of $TRAP^+$ cells and cathepsin $K^+$ cells within the CCL tissue of aged-normal dogs was also increased compared with young normal dogs (P < 0.05). Small numbers of $TRAP^+$ cells and cathepsin $K^+$ cells were seen in the intact ligaments of aged-normal dogs, which were associated with ligament fasicles in which there was chondroid transformation of ligament fibroblasts and disruption of the organized hierarchical structure of the extracellular matrix. $TRAP^+$ cells and cathepsin $K^+$ cells were not seen in CCL tissue from young-normal dogs. Localization of the proteinases $TRAP^+$ and cathepsin $K^+$ in CCL tissue was significantly associated with CCL rupture. Small numbers of proteinase positive cells were also localized in the CCL of agednormal dogs without CCL rupture, but were not detected in CCL from young-normal dogs. Taken together, these findings suggest that the cell signaling pathways that regulate expression of these proteinases in CCL tissue may form part of the mechanism that leads to upregulation of collagenolytic ligament remodeling and progressive structural failure of the CCL over time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.2
• /
• pp.285-294
• /
• 2011

The abatement of methane emission from ruminants is an important global issue due to its contribution to greenhouse gas with carbon dioxide. Methane is generated in the rumen by methanogens (archaea) that utilize metabolic hydrogen ($H_2$) to reduce carbon dioxide, and is a significant electron sink in the rumen ecosystem. Therefore, the competition for hydrogen used for methanogenesis with alternative reductions of rumen microbes should be an effective option to reduce rumen methanogenesis. Some methanogens parasitically survive on the surface of ciliate protozoa, so that defaunation or decrease in protozoa number might contribute to abate methanogenesis. The most important issue for mitigation of rumen methanogenesis with manipulators is to secure safety for animals and their products and the environment. In this respect, prophylactic effects of probiotics, prebiotics and miscellaneous compounds to mitigate rumen methanogenesis have been developed instead of antibiotics, ionophores such as monensin, and lasalocid in Japan. Nitrate suppresses rumen methanogenesis by its reducing reaction in the rumen. However, excess intake of nitrate causes intoxication due to nitrite accumulation, which induces methemoglobinemia. The nitrite accumulation is attributed to a relatively higher rate of nitrate reduction to nitrite than nitrite to ammonia via nitroxyl and hydroxylamine. The in vitro and in vivo trials have been conducted to clarify the prophylactic effects of L-cysteine, some strains of lactic acid bacteria and yeast and/or ${\beta}$1-4 galactooligosaccharide on nitrate-nitrite intoxication and methanogenesis. The administration of nitrate with ${\beta}$1-4 galacto-oligosaccharide, Candida kefyr, and Lactococcus lactis subsp. lactis were suggested to possibly control rumen methanogenesis and prevent nitrite formation in the rumen. For prebiotics, nisin which is a bacteriocin produced by Lactococcus lactis subsp. lactis has been demonstrated to abate rumen methanogenesis in the same manner as monensin. A protein resistant anti-microbe (PRA) has been isolated from Lactobacillus plantarum as a manipulator to mitigate rumen methanogenesis. Recently, hydrogen peroxide was identified as a part of the manipulating effect of PRA on rumen methanogenesis. The suppressing effects of secondary metabolites from plants such as saponin and tannin on rumen methanogenesis have been examined. Especially, yucca schidigera extract, sarsaponin (steroidal glycosides), can suppress rumen methanogenesis thereby improving protein utilization efficiency. The cashew nutshell liquid (CNSL), or cashew shell oil, which is a natural resin found in the honeycomb structure of the cashew nutshell has been found to mitigate rumen methanogenesis. In an attempt to seek manipulators in the section on methane belching from ruminants, the arrangement of an inventory of mitigation technologies available for the Clean Development Mechanism (CDM) and Joint Implementation (JI) in the Kyoto mechanism has been advancing to target ruminant livestock in Asian and Pacific regions.

• The Journal of Korean Medical History
• /
• v.19 no.2
• /
• pp.67-85
• /
• 2006

As Lee Heon-gil's books have been handed down in oral tradition and written form, there are several different versions including the one edited by the author. Books known to be his writings include Eulmisinbang, Majinbang contained in Susangsingam, and Majinbang, Majingibang and Majinbibang mentioned in Joseoneukhaksageupjilbyeongsa. Among Lee Heon-gil's books, Eulmisinbang was mentioned first in literature. Its original version is missing, but a large part of it is quoted in Magwahoitong, through which we can see the contents of Eulmisinbang. The meanings of Eulmisinbang are as follows. First, it is the most reliable woodblock-printed version as it was the base of Magwahoitong. Second, quotations in Magwahoitong are so accurate that they demonstrate the original texts of Eulmisinbang and can be used in comparison with other versions. Third, Eulmisinbang has the largest volume of contents among Lee Heon-gil's books. Susangsingam was printed again in the early 1900s by combing Majinbang and Sanbangsurok. Majinbang included in the book had been known to come from China but, through comparison with the original, it was found to be the same as Eulmisinbang. Majinbang is considered to be Eulmisinbang handed down in different name, and shows the original structure of Eulmisinbang. Considering its table of contents and the contents, Majinbang mentioned in Joseoneukhaksageupjilbyeongsa looks the same as Majinbang included in Susangsingam. Majingibang was edited by extracting the quotations of Eulmisinbang in Magwahoitong, and was reprinted in the name of Majinbibang. Through analyzing Lee Heon-gil's books, we found two courses through which his books have been handed down. First, Eulmisinbang was quoted separately according to the new structure of Magwahoitong, and the structure of Magwahoitong had been maintained and reprinted under the titles of Majingibang and Majinbibang. Second, Eulmisinbang had maintained its original structure, handed down in the name of Majinbang, and reprinted under the title of Susangsingam. Based on the findings, we selected the quotations of Eulmisinbang in Magwahoitong and Majinbang included in Susangsingam as texts for studying Lee Heon-gil's medicine for measles. Accordingly, it looks likely to rebuild a new research text based on the two woodblock-printed versions, and it will be a crucial material for studying Lee Heon-gil's medicine for measles.