• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.5
• /
• pp.501-512
• /
• 2016

The study evaluated methods to measure condensable fine particles in flue gases and measured particulate matter by fuel and material to get precise concentrations and quantities. As a result of the method evaluation, it is required to improve test methods for measuring Condensable Particulate Matter (CPM) emitted after the conventional Filterable Particulate Matter (FPM) measurement process. Relative Standard Deviation (RSD) based on the evaluated analysis process showed that RSD percentages of FPM and CPM were around 27.0~139.5%. As errors in the process of CPM measurement and analysis can be caused while separating and dehydrating organic and inorganic materials from condensed liquid samples, transporting samples, and titrating ammonium hydroxide in the sample, it is required to comply with the exact test procedures. As for characteristics of FPM and CPM concentrations, CPM had about 1.6~63 times higher concentrations than FPM, and CPM caused huge increase in PM mass concentrations. Also, emission concentrations and quantities varied according to the characteristics of each fuel, the size of emitting facilities, operational conditions of emitters, etc. PM in the flue gases mostly consisted of CPM (61~99%), and the result of organic/inorganic component analysis revealed that organic dusts accounted for 30~88%. High-efficiency prevention facilities also had high concentrations of CPM due to large amounts of $NO_x$, and the more fuels, the more inorganic dusts. As a result of comparison between emission coefficients by fuel and the EPA AP-42, FPM had lower result values compared to that in the US materials, and CPM had higher values than FPM. For the emission coefficients of the total PM (FPM+CPM) by industry, that of thermal power stations (bituminous coal) was 71.64 g/ton, and cement manufacturing facility (blended fuels) 18.90 g/ton. In order to estimate emission quantities and coefficients proper to the circumstances of air pollutant-emitting facilities in Korea, measurement data need to be calculated in stages by facility condition according to the CPM measurement method in the study. About 80% of PM in flue gases are CPM, and a half of which are organic dusts that are mostly unknown yet. For effective management and control of PM in flue gases, it is necessary to identify the current conditions through quantitative and qualitative analysis of harmful organic substances, and have more interest in and conduct studies on unknown materials' measurements and behaviors.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.317-323
• /
• 2011

Strain A-3, an amylase-producing bacteria, was isolated from coastal seawater near Daecheon in the Republic of Korea. It was seen to possess a single polar flagella and grow well, on ASW-YP agar plates, at temperatures of between $20-37^{\circ}C$. However, it grew more slowly at the temperatures of $15^{\circ}C$ and $40^{\circ}C$. Similarly, it was observed to grow abundantly, in an Artificial Sea Water-Yeast extract-Peptone (ASW-YP) liquid medium, in a pH range of 6-9, but not grow at pHs of 4-5 and a pH of 10. Strain A-3 was noted as being close to Pseudoalteromonas phenolica O-$BC30^T$, Pseudoalteromonas luteoviolacea $NCIMB1893^T$, Pseudoalteromonas rubra $ATCC29570^T$, and Pseudoalteromonas byunsanensis $FR1199^T$, with 98.30%, 97.86%, 97.78%, and 97.25% similarities respectively, in its 16S rRNA sequence. A phylogenetic tree revealed that strain A-3 and P. phenolica O-$BC30^T$ belong to a clade. However, strain A-3 differed from P. phenolica O-$BC30^T$ in relation to a number of physiological characteristics. Strain A-3 exhibited no growth above 5% NaCl concentrations, no utilization of D-glucose, D-mannose, D-maltose, or D-melibose, and no lipase (C-14) activity. All of these properties strongly indicate that strain A-3 is distant from P. phenolica O-$BC30^T$ and thus led us to name it Pseudoalteromonas sp. A-3. Pseudoalteromonas sp. A-3 produces ${\alpha}$-amylase throughout growth. Maximal amylase activities of 144.48 U/mL and 149.20 U/mL were seen at pH 7.0 and $37^{\circ}C$, respectively. Pseudoalteromonas sp. A-3's high, stable production of ${\alpha}$-amylase in addition to its biochemical features, such as alkalitolerance, suggest that it is a good candidate for industrial applications.

• Korean Journal of Environmental Biology
• /
• v.37 no.3
• /
• pp.433-445
• /
• 2019

This study was designed to develop simple tools to easily and efficiently predict the occurrence of algal bloom in agricultural lakes. Physicochemical water quality parameters were examined to reflect the phytoplankton productivity in 182 samples collected from 15 agricultural lakes from April to October 2018. Total phytoplankton abundance was significantly correlated with chlorophyll-a (Chl-a) (r=0.666) and Secchi depth (SD) (r= -0.351). The abundances of cyanobacteria and harmful cyanobacteria were also correlated with Chl-a (r=0.664, r=0.353) and SD (r= -0.340, r= -0.338), respectively, but not with total nitrogen (TN) and total phosphorus (TP). The Chl-a concentration was correlated with SD (r= -0.434), showing a higher similarity than phytoplankton abundance. Therefore, Chl-a and SD were selected as diagnostic factors for algal bloom prediction, instead of analyzing the standing crop of harmful cyanobacteria used in algae alarm systems. Specifically, accurate diagnoses were made using realtime SD measurements. The algal bloom diagnostic tool is an inverse cone-shaped container with an algal bloom diagnosis chart that modified SD and turbidity measurement methods. Lake water was collected to observe the number of rings visible in the container or the number indicated in each ring, depending on the degree of algal bloom,and to determine the final stage of algal blooming by comparison to the colorimetric level on the diagnosis chart. For an accurate diagnosis, we presented 4-step diagnostic criteria based on the concentration of Chl-a and the number of rings and a fan-shaped algal bloom diagnosis chart with Hexa code names. This tool eliminated the variables and errors of previous methods and the results were easily interpreted. This study is expected to facilitate the diagnosis of algal bloom in agricultural lakes and the establishment of an efficient algal bloom management plan.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.13-27
• /
• 2015

A systemic review on the factors affecting food catering hygiene was conducted to provide information for risk management of food catering in Korea. In total 47 keywords relating to food catering and food hygiene were searched for published journals in the DBpia for the last decade (2005-2014). As a result, 1,178 published papers were searched and 142 articles were collected by the expert review. To find the major factors affecting food catering and microbial safety, an analysis based on organization and stakeholder were conducted. School catering (64 papers) was a major target rather than industry (5 pagers) or hospitals (3 papers) in the selected articles. The factors affecting school catering were "system/facility/equipment (15 papers)", "hygiene education (12 papers)", "production/delivery company (6 papers)", food materials (4 papers)" and "any combination of the above factors (9 papers)". The major problems are follow. 1) The problems of "system/facility/equipment" were improper space division/separation, lack of mass cooking utensil, lack of hygiene control equipment, difficulty in temperature and humidity control, and lack of cooperation in the HACCP team (dietitian's position), poor hygienic classroom in the case of class dining (students'), hard workload/intensity of labor, poor condition of cook's safety (cook's) and lack of parents' monitoring activity (parents'). 2) The problem of "hygiene education' were related to formal and perfunctory hygiene education, lack of HACCP education, lack of compliance of hygiene practice (cook's), lack of personal hygiene education and little effect of education (students'). 3) The problems of "production/delivery company" were related to hygiene of delivery truck and temperature control, hygiene of employee in the supplying company and control of non-accredited HACCP company. 4) The area of "food materials" cited were distrust of safety regarding to raw materials, fresh cut produces, and pre-treated food materials. 5) In addition, job stability/the salary can affect the occupational satisfaction and job commitment. And job stress can affect the performance and the hygiene practice. It is necessary for the government to allocate budget for facility and equipment, conduct field survey, improve hygiene training program and inspection, prepare certification system, improve working condition of employees, and introducing hygiene and layout consulting by experts. The results from this study can be used to prepare education programs and develop technology for improving food catering hygiene and providing information.

• Journal of Food Hygiene and Safety
• /
• v.27 no.2
• /
• pp.152-160
• /
• 2012

The objective of this study was to analyze hazards for the growing stage of 6 tomato farms (A, B, C; soli farms, D, E, F; Nutriculture farms) located in Gyeongsangnam-do to establish the good agricultural practices (GAP). A total of 144 samples for analyzing hazards collected from cultivation environments (irrigation water, soil, nutrient solution, and air) and personal hygiene (hands, gloves, and cloths) were assessed for biological (sanitary indications and major food borne pathogens) and chemical hazards (heavy metals). Total bacteria, coliform, and fungi were detected at levels of 0.2-7.2, 0.0-6.1, and 0.0-5.4 log CFU/g, mL, hand or 100 $cm^2$, respectively. Escherichia coli were only detected in the soil sample from B farm. In case of pathogens, Bacillus cereus was detected at levels of 0.0-4.4 log CFU/(g, mL, hand or 100 $cm^2$), whereas Staphylococuus aureus, Listeria monocytogenes, E. coli O157, and Salmonella spp. were not detected in all samples. Heavy metals as a chemical hazard were detected in soil and irrigation water, but levels of them were lower than the permit limit. In conclusion, chemical hazard levels complied with GAP criteria, but biological hazards at the growing stage of tomato farms were confirmed. Therefore a proper management to prevent microbial contamination is needed.

• Journal of Food Hygiene and Safety
• /
• v.23 no.1
• /
• pp.40-50
• /
• 2008

Spread of pathogenic micro-organisms through contaminated hands is a well recognized way of transmitting disease such as food poisoning. We investigated the prevalence of aerobic plate counts, coliform bacteria, and food-poisoning bacteria on hands in various age groups. The average number of aerobic plate counts was 3.3 log CFU/hand in kindergarteners, 3.4 log CFU/hand in elementary students, 3.2 log CFU/hand in middle school students, 3.4 log CFU/hand in high school students, and 3.3 log CFU/hand in adults. Two kindergarteners, 6 elementary students, and 2 adults were positive for the coliform bacteria. Among the food poisoning bacteria we tested, S. aureus was isolated from 47 individuals. Eight isolates of B cereus were all from kindergarteners. C. perfringens was isolated from 7 individuals. Among 47 isolates of S. aureus, 25 isolates produced toxins. Seven of eight isolates of B. cereus produced toxins. None of seven C. peifringens isolates produced toxins. All 47 isolates of S. aureus were sensitive to ciprofloxacin, trimethoprim/sulfamethoxazole, clindamyccin, imipenem, rifampin and vancomycin. Four isolates (8.5%) were resistant to cefepime, chloramphenicol, cefotetan, and gentamycin. Five isolates (10.6%) were resistant to oxacillin and 6 isolates were resistant to tetracycline. This study shows that it is needs to be established policy of school lunch and personal sanitation management.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.2
• /
• pp.85-91
• /
• 1988

A field experiment was conduted to determine the effects of shading degrees (O: full sunlight, 25, 50 and 75%) on the proximate components, cell wall constituents (CWC), digestibility, water soluble carbohydrates (WSC) and nitrate nitrogen ($NO_3$-N) concentration of grasses grown in forest. For the test different artificial shading houses were established and pasutre species used were orchardgrass, timothy, perennial ryegrass and ladino clover. the experiment was performed at LES in Suwon, 1985 1. Considering proximate components, CWC and digestibility of grasses, ladino clover showed the best quality, and then perennial ryegrass. 2. The contents of crude protein, crude ash, and digestibility of grasses were increased with shadking, regardless of pasture species. As the shading degrees are increased, the contents of crude fibe in orchardgrass, perennial ryegrass and timothy were decreased, while that in ladino clover was increased with shading. 3. Grasses grwon in spring showed higher digestibility than those grwon in summer season. 4. The content of WSC was the highest in perennial ryegrass, and then ladino clover, orchardgrass, and timothy, in that order. Also WSC was decreased as the shading degrees are in creased. 5. The content of $NO_3$-N was the highest in perennial ryegrass, and then orchardgrass, ladino clover and timothy, in that order. Also the $NO_3$-N was significantly increased with higher shading level. In the regression equation between shading degrees and $NO_3$-N ($r^2=0.90^{**},\;r^2=0.95^{**}$), shading degree of 43 to 44% was critical level, causing nitrate poisoning to animal. 6. Considering grass quality, dry matter yield and $NO_3$-N, less than 40% of shading degree (over 60% of full sunlight) was desirable for better grassland improvement, management and utilization in the forest.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.2
• /
• pp.92-98
• /
• 1988

With a purpose of finding out the effects of magnesium and boron enriched organic-compound fertilizer application on the dry matter yield, yield components and changes in the botanical composition on the hilly pasture, a field experiment was arranged with five different treatments as a randomized block desigh and lasted from September, 1984 to the end of growing season in 1986. The results obtained are summarized as follows: 1. As a early plant growth and development, winter hardiness, growth vigour and coverate of grasses at the plots with organic-compound fertilizer application were better comparing to single dressing. 2. Average dry matter yields for two years were shown significantly high due to increasing amount of fertilizer. This trend was same both single and organic-compound fertilizer. And dry matter yields with organic-compound fertilizer application of low (8,693.1 kg/ha) and conventional level (12,758.7 kg/ha) were appeared to increase by 10 and 15% than those of single dressing of Low (7,930.6 kg/ha) and conventional level (11,122.6 kg/ha), respectively. But it was not significant difference. 3. Dry matter yield of grasses was significantly gained by increasing amount of fertilizer. The yield of legumes at the plots with organic-compound fertilizer application the yields of grasses were a litle more increased by 8-14%, and legumes were much more gained by 26-29% than those of the same species groups with single dressing, but it was not significant between the differnet kinds of fertilizer in the same fertilizing level. 4. At the grassland management, the rate of legumes tended to dominate at the plot without fertilization gradually. On the other hand, the botanical compositions and the rates of grasses were much better maintained at the plots with fertilization. But the rates of legumes with organic-compound fertilizer application tended to increase a little more than those of single dressing gradually. 5. All of the soil chemical properties after the experiment were much more improved comparing to before the experiment. But the average contents of soil organic matter and available $P_2O_5$ were slightly higher at the plot with organic-compound fertilization, on the other hand, pH and exchangeable cations tended to a little less than those of single dressing.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.215-222
• /
• 2012

Purpose: This study was performed to investigate the influence of indoor air qualities of an office environment on dry eye syndrome for wearing contact lens and non-wearing contact lens. Methods: To study the effects of indoor air qualities on dry eye syndrome for seventy-one subjects, $CO_2$, temperature, humidity, TSP, PM10, HCHO were measured. Each subject was tested by a McMonnie's dry eye syndrome questionnaire, a Schirmer Tear Test-I (S.T.T-I), a Schirmer Tear Test-II with anesthetics (S.T.T-II), and Tear film break-up time (T.B.U.T) in the their offices. Results: There was significant relation between the indoor air quality and dry eye syndrome for wearing contact lens and non-wearing when TSP was over $200{\mu}g/m^3$, PM10 was higher than $86.7{\mu}g/m^3$ and Formaldehyde was over $0.4{\sim}1.0{\mu}g/m^3$. However, there was no significant effect on dry eye syndrome with $CO_2$ (p=.0146), temperature (p=0.074) and humidity (p=0.053). Conclusions: It was indicated that $CO_2$, temperature and humidity were no effect on dry eye syndrome in the office environment. However TSP, PM10, formaldehyde, and wearing contact lens were effect on dry eye syndrome. Therefore, the entire management of wearing contact lens and the individual evaluation of the indoor air quality are required.

• Clinical and Experimental Pediatrics
• /
• v.48 no.9
• /
• pp.939-945
• /
• 2005

Purpose : The purpose of this study was to report outcome of fetal infants with birth weight below 500 g known as lower limit of viability and to evaluate treatment characteristics and short-term morbidity of their survivors. Methods : We retrospectively analyzed the medical records of all fetal infants with birth weight below 500 g who were delivered at Samsung Medical Center(SMC), or transferred to neonatal intensive care unit(NICU) of SMC within 24 hrs after birth between 1994 and 2004. Data for all interventions and morbidity outcome were analyzed for infants who were admitted to the NICU and were compared between NICU survivors and deaths. Results : Among 53 infants with birth weights of 400 to 499 g who were born in SMC during the study period, 8(15.1%) infants were admitted to the NICU and one was transferred to NICU from other hospital. Overall, 4(44%) of 9 survived and were discharged from the NICU. The smallest infant who survived weighed 439 grams. The least gestational age was $23^{+3}$ among the survivors. Compared with NICU deaths, NICU survivors had larger gestational age($24^{+2}{\pm}1^{+3}$ vs. $25^{+4}{\pm}2^{+3}$) and birth weight($424{\pm}17$ vs. $453{\pm}19$)(P<0.05). Median survival duration of NICU deaths was 15 days. None of NICU survivors had severe IVH, but 3(75%) had laser therapy for retinopathy of prematurity and bronchopulmonary dysplasia, respectively. Conclusion : Fetal infants with birth weight below 500 g known as lower limit of viability survived successfully. Study for their long-term follow-up will be needed to define our limit of viability and indication for their active resuscitation.