• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제37권3A호
• /
• pp.151-156
• /
• 2012

In this paper, design of quasi-cyclic(QC) low-density parity-check codes is proposed to have full diversity for space-time bit-interleaved coded modulation(ST-BICM) systems. Necessary and sufficient conditions that the proposed scheme has full diversity are proved as the condition that submatrices corresponding to the system part of codewords are invertible. And new construction method of binary invertible matrices for QC LDPC codes in ST-BICM systems are also proposed and modification for parity-check matrices are also explained.

• Journal of Communications and Networks
• /
• 제17권4호
• /
• pp.339-345
• /
• 2015

In this paper, we present an iterative reliability-based modified majority-logic decoding algorithm for two classes of structured low-density parity-check codes. Different from the conventional modified one-step majority-logic decoding algorithms, we design a turbo-like iterative strategy to recover the performance degradation caused by the simply flipping operation. The main computational loads of the presented algorithm include only binary logic and integer operations, resulting in low decoding complexity. Furthermore, by introducing the iterative set, a very small proportion (less than 6%) of variable nodes are involved in the reliability updating process, which can further reduce the computational complexity. Simulation results show that, combined with the factor correction technique and a well-designed non-uniform quantization scheme, the presented algorithm can achieve a significant performance improvement and a fast decoding speed, even with very small quantization levels (3-4 bits resolution). The presented algorithm provides a candidate for trade-offs between performance and complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제32권3C호
• /
• pp.216-225
• /
• 2007

This paper presents bit splitting methods to apply multilevel modulation to iterative codes such as turbo code, low density parity check code and turbo product code. Log-likelihood ratio method splits multilevel symbols to bits using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and implement hardware due to exponential and log calculation. therefore this paper presents Euclidean, MAX and Sector method to reduce the high complexity of LLR method. We propose optimal bit splitting method for three iterative codes.

• Bulletin of the Korean Mathematical Society
• /
• 제55권6호
• /
• pp.1627-1638
• /
• 2018

In this paper, we study an special type of cyclic codes called skew cyclic codes over the ring ${\mathbb{F}}_p+v{\mathbb{F}}_p+v^2{\mathbb{F}}_p$, where p is a prime number. This set of codes are the result of module (or ring) structure of the skew polynomial ring (${\mathbb{F}}_p+v{\mathbb{F}}_p+v^2{\mathbb{F}}_p$)[$x;{\theta}$] where $v^3=1$ and ${\theta}$ is an ${\mathbb{F}}_p$-automorphism such that ${\theta}(v)=v^2$. We show that when n is even, these codes are either principal or generated by two elements. The generator and parity check matrix are proposed. Some examples of linear codes with optimum Hamming distance are also provided.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제35권7C호
• /
• pp.594-597
• /
• 2010

This paper estimates belief-propagation (BP) decoding performance of moderate-length irregular low-density parity-check (LDPC) codes with sphere bounds. We note that for moderate-length($10^3{\leq}N{\leq}4\times10^3$) irregular LDPC codes, BP decoding performance, which is much worse than maximum likelihood (ML) decoding performance, is well matched with one of loose upper bounds, i.e., sphere bounds. We introduce the sphere bounding technique for particular codes, not average bounds. The sphere bounding estimation technique is validated by simulation results. It is also shown that sphere bounds and BP decoding performance of irregular LDPC codes are very close at bit-error-rates (BERs) $P_b$ of practical importance($10^{-5}{\leq}P_b{\leq}10^{-4}$).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제39B권11호
• /
• pp.723-729
• /
• 2014

In this paper, we derive the average repair bandwidth and/or read cost for arbitrary repairable linear code ensembles. The repair bandwidth and read cost are the required amount of data and access number of nodes to restore a failed node, respectively. Here, the repairable linear code ensemble is given by such parameters as the number k of data symbols, the number m of parity symbols, and their degree distributions. We further assume that the code is systematic, and no other constraint is assumed, except possibly that the exact repair could be done by the parity check-sum relation with fully connected n=k+m storages. This enables one to apply the result of this paper directly to any randomly constructed codes with the above parameters, such as linear fountain codes. The final expression of the average repair read cost shows that it is highly dependent on the degree distribution of parity symbols, and also the values n and k.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제35권11C호
• /
• pp.901-906
• /
• 2010

Low density parity check (LDPC) code, first introduced by Gallager and re-discovered by MacKay et al, has attracted researcher's interest mainly due to their performance and low decoding complexity. It was remarkable that the performance is very close to Shannon capacity limit under the assumption of having long codeword length and iterative decoder. However, comparing to turbo codes widely used in the current mobile communication, the encoding complexity of LDPC codes has been regarded as the drawback. This paper proposes a solution for DVB-S2 LDPC encoder to reduce the encoder latency. We use the fast IRA encoder that use the transformation of the parity check matrix into block-wise form and the partial parallel process to reduce the number of system clocks for the IRA code encoding. We compare the proposed encoder with the current DVB-S2 encoder to show that the performance of proposal is better than that of the current DVB-S2 encoder.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제49권8호
• /
• pp.1-11
• /
• 2012

The multi-code spread spectrum communication system, which spreads data bit stream by multiplexing orthogonal codes, can transmit data in high rate. However it needs the high-cost good linear amplifier because of the multi-level output signal. In order to overcome this drawback several systems making the amplitude of output signal constant with Walsh codes have been proposed. Recently constant amplitude pre-coded multi-code spread spectrum systems using extended m-sequence have been proposed. In this paper we consider an extended m-sequence based constant amplitude multi-code spread spectrum system with code set partitioning. By grouping the orthogonal codes into 4 subsets, not only is the computational complexity of the transceiver reduced but BER performance also improves. It has been shown that parity checking on four detected codes at the receiver can correct code detection error and result in BER performance enhancement. In this paper we propose a improved parity check receiver. We carried out computer simulation to verify feasibility of the proposed algorithm.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제44권3호
• /
• pp.68-73
• /
• 2007

Recently, WSN(wireless sensor networks) consists of several sensor nodes in sensor field. And each sensors have the enforced energy constraint. Therefore, it is important to manage energy efficiently. In WSN application system, FEC(Forward error correction) increases the energy efficiency and data reliability of the data transmission. LDPC(Low density parity check) code is one of the FEC code. It needs more encoding operation than other FEC code by growing codeword length. But this code can approach the Shannon capacity limit and it is also can be used to increase the data reliability and decrease the transmission energy. In this paper, the author adopt Linear-Congruence method at generating parity check matrix of LDPC(Low density parity check) codes to reduce the complexity of encoding process and to enhance the energy efficiency in the WSN. As a result, the proposed algorithm can increase the encoding energy efficiency and the data reliability.

• ETRI Journal
• /
• 제34권4호
• /
• pp.629-632
• /
• 2012

This letter investigates the combination of the Chase-2 and sum-product (SP) algorithms for low-density parity-check (LDPC) codes. A simple modification of the tanh rule for check node update is given, which incorporates test error patterns (TEPs) used in the Chase algorithm into SP decoding of LDPC codes. Moreover, a simple yet effective approach is proposed to construct TEPs for dealing with decoding failures with low-weight syndromes. Simulation results show that the proposed algorithm is effective in improving both the waterfall and error floor performance of LDPC codes.