• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.26-35
• /
• 1987

본 연구에서는 (1) 삭도설계에 더욱 정확한 값을 얻기 위하여 엄밀해를 가진 현수곡선이론을 바탕으로 하여 설계변수들과의 관계를 유도 및 체계화 시켰다. (2) 다목적 함수를 벡터최소화함에 따라, 얻어지는 Pareto 최적해를 구할 수 있었다. Pareto 최적해를 구하는 방법에는 중첨법, 제한법, 추정법이 있다. 여기서는 삭도의 최적화에 대한 특성과 평가값은 서로 복잡한 trad off관계를 가지고 있으므로 다목적 인 두개의 목적함수에 중첩시켜 단일목적 함수로 변환하는 가운데 Kunn-Tuck최적생의 필요조건을 적용하면 목적함수의 값 범위를 해석적으로 정하고 Pareto최적해 집합을 해석적으로 구한다. (3) 이들의 해석에 관한 수치예를 들어 설계에 기준이 되는 로 우프의 규격과 초기장력을 결정하였다.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.455-461
• /
• 2008

EDCA (Enhanced Distributed Channel Access)는 무선 로컬 네트워크에서 QoS를 지원하기 위해 IEEE 802.11e 표준에서 채택한 채널 접근 방법이다. EDCA는 트래픽을 몇 개의 범주로 분류하고 각 범주마다 채널 접근 매개변수 값을 달리 갖도록 하여 서비스 차등화를 제공한다. 본 논문에서는 비실시간 트래픽에 대해서는 처리량(throughput)을 최대화하면서 실시간 트래픽에 대해서는 지연 및 처리량 제약조건을 만족시키도록 EDCA 매개변수를 트래픽 환경에 동적으로 적응시키는 기법을 제안한다. 이를 위해, 먼저 EDCA 매개 변수 값의 조합이 갖는 공간을 효율적으로 탐색하는 설계 단계 알고리즘을 개발한다. 그리고 이 알고리즘을 이용하여 각 예상되는 트래픽 환경에 대해 지연-처리량 이득/손실에 대한 파레토 커브 (Pareto curve)를 유도한다. 이 파레토 데이터베이스는 트래픽 환경 및 관리 정책에 따라, 최적으로 매개변수를 조절하는데 사용될 수 있다. 시뮬레이션에 따르면, 표준에서 제시된 매개변수 값을 이용하는 경우에 비해서, 제안된 방법이 실시간 트래픽의 지연 및 처리량 보장에 탁월한 성능을 보이며 비실시간 트래픽의 처리량을 평균적으로 12% 증가시키는 것으로 나타났다.

• Journal of Welding and Joining
• /
• 제20권2호
• /
• pp.102-108
• /
• 2002

Resistance spot welding of aluminum alloys is based upon Joule heating of the components by passing a large current in a short duration. Since aluminum alloys have the potential to replace steels fur automobile body assemblies, it is important to study the process robustness of aluminum spot welding process. In order to evaluate the effects of process parameters on the weld quality, major process variables and abnormal process conditions were selected and analyzed. A newly developed two-stage, sliding-level experiment was adopted fur effective parameter design and analysis. Suitable ranges of welding current and button diameters were obtained through the experiment. The effects of the factors and their levels on the variation of acceptable welding current were considered in terms of main effects. From the results, it is concluded that any abnormal process condition decreases the suitable current range in the weld lobe curve. Pareto analysis of variance was also introduced to estimate the significant factors on the signal-to-noise (S/N) ratio. Among the six factors studied, fit-up condition is found to be the most significant factor influencing the SM ratio. Using a Pareto diagram, the optimal condition is determined and the SM ratio is significantly improved using the optimal condition.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.131-140
• /
• 2003

An accident involving a boiler can result in a disaster since it handles high-pressurized steam so that it may cause an explosion. Therefore, the boiler is very susceptible to industrial accidents. This thesis aimed to develop counter-plans to prevent industrial accidents involved the boiler. At first after collecting accident cases involving boilers, a survey on the trait of them was carried out. Ant on the other hand a qualitative analysis was conducted to draw out hazardous components in the boiler itself and their inherent relative importance was assessed. Through this procedure, 'negligence of unsafe condition' was noted as the major cause for unsafe acts whereas 'fault in work procedure' for unsafe condition. In the meanwhile, results of a hazard analysis using FMEA technique ranked gas safety devices, a switch preventing gas from under-pressurization, protect relays high. In particular, it was pointed out that the water feeding and steam subsystem has more components in hazard than other subsystems. Considering these analyses results, counter-plans to improve safety management was suggested also.

• Journal of Microbiology and Biotechnology
• /
• 제22권9호
• /
• pp.1185-1192
• /
• 2012

This study investigated the hydrocarbonoclastic microbial community present on weathered crude oil and their ability to degrade weathered oil in seawater obtained from the Gulf St. Vincent (SA, Australia). Examination of the native seawater communities capable of utilizing hydrocarbon as the sole carbon source identified a maximum recovery of just $6.6{\times}10^1\;CFU/ml$, with these values dramatically increased in the weathered oil, reaching $4.1{\times}10^4\;CFU/ml$. The weathered oil (dominated by > $C_{30}$ fractions; $750,000{\pm}150,000mg/l$) was subject to an 8 week laboratory-based degradation microcosm study. By day 56, the natural inoculums degraded the soluble hydrocarbons (initial concentrations $3,400{\pm}700mg/l$ and $1,700{\pm}340mg/l$ for the control and seawater, respectively) to below detectable levels, and biodegradation of the residual oil reached 62% ($254,000{\pm}40,000mg/l$) and 66% ($285,000{\pm}45,000mg/l$) in the control and seawater sources, respectively. In addition, the residual oil gas chromatogram profiles changed with the presence of short and intermediate hydrocarbon chains. 16S rDNA DGGE sequence analysis revealed species affiliated with the genera Roseobacter, Alteromonas, Yeosuana aromativorans, and Pseudomonas, renowned oil-degrading organisms previously thought to be associated with the environment where the oil contaminated rather than also being present in the contaminating oil. This study highlights the importance of microbiological techniques for isolation and characterisation, coupled with molecular techniques for identification, in understanding the role and function of native oil communities.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.203-212
• /
• 2018

Quality requirements of manufactured products or parts are given in the form of specification limits on the quality characteristics of individual units. If a product is to meet the customer's fitness for use criteria, it should be produced by a process which is stable or repeatable. In other words, it must be capable of operating with little variability around the target value or nominal value of the product's quality characteristic. In order to maintain and improve product quality, we need to apply statistical process control techniques such as histogram, check sheet, Pareto chart, cause and effect diagram, or control charts. Among those techniques, the most important one is control charting. The cumulative sum (CUSUM) control charts have been used in statistical process control (SPC) in industries for monitoring process shifts and supporting online measurement. The objective of this research is to apply Taguchi's quality loss function concept to cost based CUSUM control chart design. In this study, a modified quality loss function was developed to reflect quality loss situation where general quadratic loss curve is not appropriate. This research also provided a methodology for the design of CUSUM charts using Taguchi quality loss function concept based on the minimum cost per hour criterion. The new model differs from previous models in that the model assumes that quality loss is incurred even in the incontrol period. This model was compared with other cost based CUSUM models by Wu and Goel, According to numerical sensitivity analysis, the proposed model results in longer average run length in in-control period compared to the other two models.

• 한국물환경학회지
• /
• 제34권6호
• /
• pp.591-601
• /
• 2018

Optimized BMP plans for controlling water quality using the Pareto trade-off surface curve in upper basin of Namgang Dam is proposed. The proposed alternatives consist of BMP installation scenarios in which the reduction efficiency of non-point pollutants is maximized in a given budget. The multi-objective optimization process for determining the optimal alternatives was performed without direct implementation of a watershed model such as SWAT analysis, thereby reducing the time taken. The shortening of the calculation time further enhances the applicability of the multi-objective optimization technique in preparing regional water quality management alternatives. In this study, different types of BMP are applied depending on the land use conditions. Fertilizer input control and vegetative filter strip are considered as alternatives to applying BMP to the field but only control of fertilizer input can be applied to rice paddies. Fertilizer input control and vegetative filter strip can be installed separately or simultaneously in a hydrologic response unit. Finally, 175 BMP application alternatives were developed for the water quality management of the upper river basin of Namgang dam. The proposed application alternative can be displayed on the map, which has the advantage of clearly defining the BMP installation location.