• 대한전자공학회논문지SP
• /
• 제43권2호
• /
• pp.1-11
• /
• 2006

본 논문에서는 샷(shot) 기반 비디오 색인 구조에서 비-파라미터(non-parametric) 기반의 움직임 분류를 통한 비디오 영상 검색 기법을 제안한다. 본 논문에서 제안하는 비디오 검색 시스템은 장면 전환 기법을 통해 얻은 샷 단위의 짧은 비디오로부터 대표 프레임과 움직임 정보를 취득한 후, 이를 통해 시각적 특징과 움직임 특징을 추출하여 유사도를 비교함으로써 시-공간적 특징을 이용한 실시간 검색이 가능하도록 구현되었다. 비-파라미터 기반의 움직임 특징의 추출은 MPEG 압축 스트림으로부터 정규화된 움직임 벡터계(界)를 추출한 후, 각각의 정규화된 움직임 벡터를 여러 개의 각도 빈(bin)으로 양자화하고 이의 평균과 분산, 방향 등을 고려함으로써 효과적으로 이루어진다. 대표 프레임에서의 시각 특징 검출을 위해서는 에지 기반의 공간 기술자를 이용하였다. 실험 결과는 영상 색인 및 검색에 있어서 제안된 시스템이 매우 효과적임을 잘 나타내고 있다. 데이터베이스 내 영상의 색인을 위해서는 R*-tree 구조를 이용한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.211-214
• /
• 2002

A novel structuring element for the morphological filter is proposed in order to detect a small target at a long distance. The modeling of the structuring element is based on the real data and implemented by parametric model approach. Several synthetic

• 비파괴검사학회지
• /
• 제23권3호
• /
• pp.270-279
• /
• 2003

Parametric studies have been conducted into the variability of the factors affecting the ultrasonic testing applied to weldments. The influence of ultrasonic equipment, transducer parameters, test technique, job parameters, defect type and characteristics on reliability far defect detection and sizing was investigated by experimentation. The investigation was able to build up substantial bank of information on the reliability of manual ultrasonic method for testing weldments. The major findings of the study separate into two parts, one dealing with correlation between ultrasonic techniques, equipment and defect parameters and inspection performance effectiveness and other with human factors. Defect detection abilities are dependent on the training, experience and proficiency of the UT operators, the equipment used, the effectiveness of procedures and techniques.

• Smart Structures and Systems
• /
• 제14권5호
• /
• pp.917-942
• /
• 2014

Multivariate statistics based damage detection algorithms employed in conjunction with novel sensing technologies are attracting more attention for long term Structural Health Monitoring of civil infrastructure. In this study, two practical data driven methods are investigated utilizing strain data captured from a 4-span bridge model by Fiber Bragg Grating (FBG) sensors as part of a bridge health monitoring study. The most common and critical bridge damage scenarios were simulated on the representative bridge model equipped with FBG sensors. A high speed FBG interrogator system is developed by the authors to collect the strain responses under moving vehicle loads using FBG sensors. Two data driven methods, Moving Principal Component Analysis (MPCA) and Moving Cross Correlation Analysis (MCCA), are coded and implemented to handle and process the large amount of data. The efficiency of the SHM system with FBG sensors, MPCA and MCCA methods for detecting and localizing damage is explored with several experiments. Based on the findings presented in this paper, the MPCA and MCCA coupled with FBG sensors can be deemed to deliver promising results to detect both local and global damage implemented on the bridge structure.

• Smart Structures and Systems
• /
• 제4권1호
• /
• pp.47-66
• /
• 2008

The present work utilizes system identification technique for health monitoring of shear building, wherein Parametric State Space modeling has been adopted. The method requires input excitation to the structure and also output acceleration responses of both undamaged and damaged structure obtained from numerically simulated model. Modal parameters like eigen frequencies and eigen vectors have been extracted from the State Space model after introducing appropriate transformation. Least square technique has been utilized for the evaluation of the stiffness matrix after having obtained the modal matrix for the entire structure. Highly accurate values of stiffness of the structure could be evaluated corresponding to both the undamaged as well as damaged state of a structure, while considering noise in the simulated output response analogous to real time scenario. The damaged floor could also be located very conveniently and accurately by this adopted strategy. This method of damage detection can be applied in case of output acceleration responses recorded by sensors from the actual structure. Further, in case of even limited availability of sensors along the height of a multi-storeyed building, the methodology could yield very accurate information related to structural stiffness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권7호
• /
• pp.2414-2433
• /
• 2021

This article focuses on providing remedial solutions for COVID disease through the data collection process. Recently, In India, sudden human losses are happening due to the spread of infectious viruses. All people are not able to differentiate the number of affected people and their locations. Therefore, the proposed method integrates robotic technology for monitoring the health condition of different people. If any individual is affected by infectious disease, then data will be collected and within a short span of time, it will be reported to the control center. Once, the information is collected, then all individuals can access the same using an application platform. The application platform will be developed based on certain parametric values, where the location of each individual will be retained. For precise application development, the parametric values related to the identification process such as sub-interval points and intensity of detection should be established. Therefore, to check the effectiveness of the proposed robotic technology, an online monitoring system is employed where the output is realized using MATLAB. From simulated values, it is observed that the proposed method outperforms the existing method in terms of data quality with an observed percentage of 82.

• 대한전자공학회논문지SP
• /
• 제46권5호
• /
• pp.162-166
• /
• 2009

본 논문은 적응 반향 제거기인 parametric wiener filter (PWF)의 반향신호 제거 파라미터를 구간 조건에 따라 차등적으로 적용시키는 새로운 음향학적 반향제거 (Acoustic Echo Suppression, AES) 알고리즘을 제안한다. PWF는 반향 신호 추정의 부정확성을 보상하고자 반향신호 제거 파라미터를 사용한다. 기존의 방법은 단일통화 구간과 동시통화 구간에 관계없이 동일한 반향신호 제거파라미터 값을 적용하여 동시통화 환경에서 근단 신호의 왜곡을 발생 시킨다. 본 논문에서는 상관계수 (Correlation Coefficient)를 이용한 동시통화(Double-Talk) 검출 알고리즘과 음성구간검출기 (Voice Activity Detector, VAD)의 결과로부터, 원단 화자만 있는 구간과 동시통화 구간을 구분하고 각각의 경우에 반향제거 파라미터를 달리 적용하여 동일한 반향신호 제거 파라미터를 사용함에 따른 동시통화 구간내의 근단 화자신호의 음질 저하 없이 반향신호를 보다 효과적으로 제거하는 방법을 제안한다. 제안된 방법의 결과는 객관적인 실험을 통해 비교 평가한 결과 우수한 성능을 보였다.

• 응용통계연구
• /
• 제19권2호
• /
• pp.369-377
• /
• 2006

현재 발생중인 시계열 데이터에 분산변화가 일어날 경우 이동 분산비를 사용하여 분산 변화점을 빠른 시간 내에 탐지하는 문제를 다룬다. 이동 분산비의 분포로서 F분포와 데이터에 의존하여 추정되는 실증적 분포를 제안한 후 상호비교를 통하여, 어느 방법이 시계열 데이터에서 분산의 변화점을 잘 탐지하는지 연구하였다.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1104-1113
• /
• 2000

This paper proposes an efficient reverse engineering technique for compound surfaces using a boundary detection method. This approach consists in extracting geometric edge information using a vision system, which can be used in order to drastically reduce geometric errors in the vicinity of compound surface boundaries. Through the image-processing technique and the interpolation process, boundaries are reconstructed by either analytic curves (e. g. circle, ellipse, line) or parametric curves (B-spline curve). In other regions, except boundaries, geometric data are acquired on CMM as points inspected using a touch type probe, and then they are interpolated on several surfaces using a B-spline skinning method. Finally, the boundary edge and the skinned surfaces are combined to reconstruct the final compound surface. Through simulations and experimental works, the effectiveness of the proposed method is confirmed.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.606-613
• /
• 2011

In this paper, patterns of laser scattering and detection of micro defects have been investigated based on Rayleigh criterion for silicon wafer in solar cell. Also, a new laser scattering mechanism is designed using characteristics of light scattering against silicon wafer surfaces. Its parameters are to be optimally selected to obtain effective and featured patterns of laser scattering. The optimal parametric ranges of laser scattering are determined using the mean intensity of laser scattering. Scattering patterns of micro defects are investigated at the extracted parameter region. Among a lot of pattern features, both maximum connected area and number of connected component in patterns of laser scattering are regarded as the important information for detecting micro defects. Their usefulness is verified in the experiment.