• 전력전자학회논문지
• /
• 제9권5호
• /
• pp.413-419
• /
• 2004

고피나스 모델 자속관측기를 사용한 유도전동기 직접벡터제어 시스템에서 회전자 시정수에 오차가 있을 경우 시스템의 동특성이 저하되는 현상을 살펴보았으며, 이를 해결하기 위한 방안으로 MRAC를 이용한 회전자 시정수 실시간 추정 알고리즘을 제안하였다. 제안한 방식의 타당성을 검증하기 위해서 자속관측기에 사용되는 전동기 상수들의 오차가 회전자 시정수 추정에 미치는 영향을 실험적으로 분석한 결과 전동기 상수에 다소 오차가 있더라도 회전자 시정수의 추정오차는 5% 이내로 수렴됨을 보였다. 따라서 본 연구에서 제안한 회전자 시정수 추정 알고리즘을 고피나스 모델 자속관측기에 적용하게 되면 전동기 상수 변동에 강인한 유도전동기 직접벡터제어 시스템을 구현할 수 있다.

• 한국세라믹학회지
• /
• 제34권9호
• /
• pp.927-934
• /
• 1997

Static and cyclic fatigue tests were carried out for alumina specimen to study the statistical analyses (normal, lognormal and Weibull distribution) of fatigue lifetime data and nominal initial crack length data. Fatigue lifetime data followed Weibull distribution better than normal or lognormal distribution, for the shape parameter of the notched specimen was larger than that of the unnotched specimen. The nominal initial crack length data obtained from fatigue lifetime followed the lognormal and Weibull distribution better than normal distribution, for the coefficient of variation of the unnotched specimen was larger than that of the notched specimen, and shape parameter of unnotched specimen was smaller than that of the notched specimen.

• 한국통신학회논문지
• /
• 제16권11호
• /
• pp.1132-1142
• /
• 1991

본 논문에서는 이동물체의 형태정보를 분석을 위한 이동물체의 특징파라미터를 추출하는 기법을 제안하였다. 이차원 영상에서 이동물체의 추출은 차영상 기법을 이용하였다. 이동물체의 특징 파라미터는 면적과 둘레, 면적과 둘레의 비(A/P ratio), 굴곡점(Vertex), 종횡비(X/Y ratio)로 하였다. 휘도 변화를 600 Lux${\sim}$1400 Lux로 가변시켜 휘도변화에 대한 각 특징파라미터의 오차 허용범위를 결정하였다. 제안된 방법의 타당성을 입증하기 위하여 모형 자동차를 이용하여 동일성을 판별한 결과 판정오류는 6%미만이었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.236-239
• /
• 1995

In short channel MOSFET, it is very important to establish optimal process conditions because of variation of devise characteristics due to the process parameters. In this paper, we used process simulator and device simulator in order to optimize process parameter which changes of the device characteristics caused by process parameter variation. From this simulation, it has been derived to the dependence relations between process parameter and device characteristics. The experimental results of fabricated short channel device according to the optimal process parameters demonstrate good device characteristics.

• 통합자연과학논문집
• /
• 제13권3호
• /
• pp.92-96
• /
• 2020

Taguchi's robust parameter design is an approach to reduce the performance variation of quality characteristics in products and processes. In robust design, the signal-to-noise ratio (SN ratio) was used to find the optimum condition to minimize the variation of quality characteristics as much as possible and bring the average of quality characteristics closer to the target value. In this paper, we propose a simultaneous optimization method based on a linear model of the SN ratio as a method to find the optimal condition of the control factor in case of multi-characteristics. In addition, the proposed method and the existing method were compared and studied by taking actual cases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.162-166
• /
• 2000

In this paper, a maximum efficiency control technique of real-time processing in which parameter variation is compensated in vector control of an induction motors(I.M.) is proposed. Based on equivalent model of I.M., a loss minimization factor(LMF) with the variations of speed is derived. To solve problem of inaccuracy of LMF curves due to machine parameter variation, rotor resistance estimation is performed by using instantaneous reactive power. The estimated rotor resistance values are applied to the maximum efficiency control with a LMF.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.75.3-75
• /
• 2001

This paper addresses the design of State-feedback Robust Guaranteed-Cost Controllers with controller gain variations. Since the unstructured uncertainty is the most dominant uncertainty in the modeling of the plant, the plant is assumed to have the unstructured uncertainty. It is necessary to take the controller parameter perturbation into consideration when we design the robust controller. Otherwise, the resulting controller may show the fragility property. That is to say, the extremely small controller parameter variation may result in the instability of the overall closed-loop system. Therefore, the design purpose is that the maximum performance index is guaranteed in the presence of the unstructured plant uncertainty and controller parameter variations ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.111.1-111
• /
• 2001

In this paper, a robust speed control is proposed for Permanent Magnet Synchronous Motor system. PMSM without reduction gear has been widely used in high performance application such as robots and machine tools. It is well known that the control performance of the PMSM is very sensitive to load disturbance and system parameter variation. The idea of the proposed speed controller based on combination of sliding mode control with fuzzy gain scheduling. The sliding mode controller leads to fast system dynamics of slight sensitivity to the load disturbance and system parameter variations, the fuzzy gain scheduling mechanism reduces the chattering phenomenon. The simulation results have proved that the proposed control scheme provides a robust control performance under load disturbance and system parameter variation.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1291-1299
• /
• 1995

In confined coaxial jets, the flow-mixing characteristics depend on the initial conditions at the nozzle outlet such as velocity ratio and nozzle radius ratio. In this study, nozzle ratio(inner/outer) was 0.3. Longitudinal axial velocity, turbulent intensity and Reynolds shear stress were measured by CTA. Measurements were made from the duct inlet to the region where similarity solution could exist. This study investigated flow charicteristics according to the variation of similitude parameter which was derived from the theory of Craya-Cutet. The range of similarity region depends on the variation of the similitude patameter. The form factor obtained from the axial velocity profile in the similarity region was constant. The higher the similitude parameter, the wider the spread rate of the jets. Due to this fact, the similarity conditions developed more quickly and the region where the similarity holds became narrow. Present experimental data confirmed the validity of Craya-Curtet theory.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2828-2835
• /
• 2000

This paper presents the fatigue behavior of composite materials with impact-induced damage. The impact damage parameter is proposed to evaluate the effect of impact damage on fatigue life. Subsequently, a new model is developed to predict the fatigue life of impacted composite materials. Also, a stochastic model is proposed to describe the variation of fatigue life due to the material nonhomogeneity. For these models, the fatigue tests were performed on the unimpacted and impacted composite materials, The effect of impact damage on fatigue life can be characterized by the impact damage parameter. Additionally, the results by the present fatigue life prediction model agree will with experimental results regardless of applied impact energy. Also, the variation of fatigue life can be described by the present stochastic model and is reduced with applied impact energy.