• 대한원격탐사학회지
• /
• 제20권2호
• /
• pp.77-89
• /
• 2004

동북아시아 지역의 에어로졸 광학두께의 시공간적 변화는 기후변화에 큰 역할을 하는 대기중의 에어로졸의 연구에 있어 매우 중요하다. 본 연구에서는 MODIS를 이용한 에어로졸 광학두께 자료와 TOMS 에어로졸 인덱스 자료를 수집하여 2001년 한해동안의 에어로졸의 물리학적 광학적 특성을 살펴보았다. 일별 에어로졸 관측 자료를 분석한 결과 에어로졸의 계절별 변화양상은 봄에 높고 겨울에 낮음을 뚜렷이 나타내고 있었다. 한편, 지역별 특징은 2001년에 MODIS에 의해 관측된 에어로졸 광학 두께의 연평균 값은 베이징이 가장 높은 0.65$\pm$0.37이고 고산이 가장 낮은 0.31$\pm$0.19로 나타났으며 서울과 광주가 각각 0.54$\pm$0.26과 0.38$\pm$0.19로 관측되었다. 이러한 연중 에어로졸 분석결과를 바탕으로 2001년 봄철 ACE-Asia 집중 관측 기간 중에 MODIS 와 TOMS 관측 자료를 이용한 한반도 인근지역의 에어로졸 특성을 조사하였다. 봄철에 높은 값을 보이는 에어로졸 광학두께(>0.7)와 에어로졸 인덱스 값(>0.5), 그리고 낮은 값을 나타내는 ${\AA}$ngstrom 지수 (<0.5)는 모두 봄철 황사현상에 의한 것이다. 그러나 때때로 황사와 같이 큰 입자가 아닌 다른 오염원에 의한 에어로졸로 인한 영향도 발견되고 있어 중국에서 발생한 오염된 에어로졸이 한반도로 이동하는 것이 원인으로 사료된다. 위성영상에서 나타난 에어로졸의 공간적 분포양상이 이를 입증하고 있다. 따라서 동북아시아 지역의 에어로졸 특성을 나타내는데 위성자료의 활용도는 매우 효과적이다. 않았다. 2) 체내에 축적된 질소율(외관상의 생물가)은 상ㆍ하번초형 혼과초지가 54.5%으로 상번초형 혼파초지의 53.7%보다 높았으나 유의적인 차이는 인정되지 않았다. 3) 외관상 대사에너지의 축적률은 상ㆍ하번 초형 혼파초지가 59.4%으로 상번초형 혼파초지의 58.2%보다 약간 높은 편이었으나 유의적인 차이는 인정되지 않았다. 따라서, 산양에 의한 목초의 이용성은 두 혼파 초지간에 큰 차이가 없는 것으로 나타나, 혼파초지내 turf type 초류도 사초자원으로써 이용가치가 있다고 하겠다.ue 및 orchardgrass 등의 식생비율이 높았으며, redtop, red fescue와 같은 하번초 초종의 식생도 비교적 고르게 유지되었다. 따라서, 상번초형 혼파초지에 비하여 상ㆍ하번초형 혼파초지는 목초의 건물수량과 품질에는 큰 영향을 미치지 못하였으나, 건물소화율 및 가소화건물수량이 높았고(p < 0.05), 연중 고르게 식생을 유지할 수 있었던 것으로 보아 생장습성이 다른 초종을 다양하게 혼파 이용하는 것도 좋을 것으로 사료된다.4.3 : 73.3으로 단백질과 지방이 약간 부족하다고 볼 수 있다. 4) 법무부 급식관리위원회의 수용자 급식기준과 각 형무소의 보통활동 수형자를 위해 공급하는 영양량을 종합적으로 비교해보면 총열량 공급량은 조선 경성형무소(Kim CH 2003)에서는 3966.5 ㎉로 급식기준열량의 159.9%로 공급량이 높았으며, 대만 신죽 형무소에서는 소년 수형자임에도 89.6%만을 공급하고 있었다. 프랑스와 독일은 각각 110.9%, 107.1%로 급식기준을 조금 넘는 적정열량에서 가까운 양을 공급하였다고 할 수 있다. 일제하의 조선, 세계공황 이후 식량이 극도로 부족한 상황에서 대만,

• 대한원격탐사학회지
• /
• 제35권5_1호
• /
• pp.665-679
• /
• 2019

면 단위의 고해상도 토양 수분 측정이 가능한 Cosmic-Ray Neutron Probe(CRNP)를 이용한 토양수분 관측 데이터는 위성기반의 큰 공간해상도를 지닌 토양 수분 자료와 지점 관측 토양 수분 자료를 연결하는 통로의 역할을 수행할 것으로 기대된다. 이러한 CRNP 센서를 이용하여 토양 수분을 산출하기 위해서는 측정된 중성자 강도의 교정이 필요한데 기존의 교정 방법은 관측 기간의 단일 교정 중성자 강도($N_0$)를 이용하여 장기간의 토양 수분 관측에 어려움이 있다. 또한 기존 방법을 이용한 $N_0$는 시간에 따라 변동하는 인자들에 의해 영향을 고려하지 못하며 이로 인해 CRNP 센서를 이용한 토양 수분 관측 값에 불확실성을 초래한다. 이를 극복하기 위해 새로운 교정 방법(Dynamic-$N_0$ 교정 방법)을 제시한다. Dynamic-$N_0$ 교정 방법은 시간에 따른 $N_0$의 변동을 고려함으로써 토양 수분 관측 값을 개선하는 방법으로 비선형 회귀 모델을 이용하여 $N_0$의 시계열 자료를 구하여 토양 수분 산출에 이용한다. 본 연구에서는 Dynamic-$N_0$ 교정 방법을 이용하여 산출된 토양 수분을 지점 기반 토양 수분 및 기존의 교정방법을 이용한 토양 수분 산출 값과 비교하였으며 결과적으로 상관계수를 0.7에서 0.72로 개선하였다. RMSE와 Bias는 각각 $0.036m^3m^{-3}$에서 $-0.026m^3m^{-3}$으로, $-0.006m^3m^{-3}$에서 $-0.001m^3m^{-3}$으로 개선되었다. Dynamic-$N_0$ 교정 방법의 기존의 방법 대비 탁월한 성능은 CRNP 센서 주변의 수소 공급원에 의하여 $N_0$의 변동이 발생했음을 시사한다. 그러나 몇몇 중성자 강도에 영향을 미치는 수소 공급원들에 대한 고려가 구체적으로 이뤄지지 않았는데 이는 향후 연구를 통해 Cosmic-Ray를 이용한 토양 수분 관측이 보다 개선될 수 있음을 보여준다.

• 한국가금학회지
• /
• 제47권4호
• /
• pp.267-274
• /
• 2020

본 연구에서는 국립축산과학원 가금연구소에서 보유하고 있는 흑색 재래종토종닭 L계통, 한국화이트레그혼 F, K계통의 150일령 및 270일령 체중, 시산일령, 시산 및 270일령 난중, 270일령 산란수 총 6가지 경제형질에 대한 유전모수를추정하였다. 기초통계량에서 150일령 및 270일령 체중은 L계통이 각각 1,714 g, 2,032 g으로 F, K계통에 비해 무겁게 나타났으며, 시산일령은 L, F, K계통에서 153, 140, 143일로 나타났으며, L계통의 시산난중 및 270일령 난중은 각각 37 g, 54 g으로 F, K계통에 비해 가벼웠으며, 270일령까지 산란수는 76개로 F, K계통의 산란수인 100, 99개에 비해 적은 경향을 나타냈다. 재래종토종닭과 화이트레그혼의 품종 간 경제형질 능력의 차이를 보였으며, 화이트레그혼 품종 내 F, K계통 간 경제형질 능력의 유의적인 차이는 없는 것으로 나타났다. L, F, K계통에서 150일령 체중의 유전력은 0.48~0.52로 고도의 유전력으로 나타났으며, 270일령 체중은 0.56~0.57로 고도의 유전력, 270일령 난중은 0.55~0.59로 고도의 유전력, 시산일령은 0.31~0.45로 중도에서 고도의 유전력, 270일령 산란수는 0.20~0.22로 중도의 유전력, 마지막으로 시산난중은 0.15~0.16으로 저도의 유전력을 보였다. 시산일령과 270일령까지 산란수의 유전 및 표현형 상관계수는 각각 -0.73~-0.63, -0.48~-0.42로 부의 상관관계가 나타났다. 시산일령과 체중의 유전 상관은 0.05~0.17로 정의 상관관계를 보였으나, 표현형 상관은 -0.04~0.10으로 대체적으로 부의 상관관계를 나타냈다. 또한, 270일령까지 산란수와 150일령, 270일령 체중 및 270일령 난중의 유전상관은 각각 -0.16~0.01, -0.14~-0.03, -0.45~-0.24로 나타났고, 표현형 상관은 각각 -0.08~0.07, -0.13~0.04, -0.15~-0.11로 나타나 전반적으로 부의 상관을 보였다. 270일령 난중과 150, 270일령 체중은 0.36~0.49의 유전 상관과 0.29~0.37의 표현형 상관을 나타냈으며, 모두 정의 상관을 나타냈다. 270일령 난중과 시산난중은 0.50~0.73의 유전 상관과 0.21~0.32의 표현형 상관을 나타냈으며, 모둔 정의 상관을 나타냈고, 유전 상관이 표현형 상관보다 높게 나타났다. 시산난중과 체중의 상관 관계는 0.22~0.39로 정의 유전 상관과 0.07~0.16의 정의 표현형 상관을 보였으며, 시산난중과 시산일령은 0.48~0.67로 높은 정의 유전 상관과 0.27~0.39 정의 표현형 상관을 보였다. 그리고 150일과 270일 체중 간 유전 상관 0.90~0.91, 표현형 상관 0.68~0.80으로 상당히 높은 상관 관계가 있는 것으로 나타났다.

• 한국수자원학회논문집
• /
• 제55권6호
• /
• pp.447-459
• /
• 2022

본 연구에서는 위성 기반 재분석 강수 자료인 PERSIANN-CCS-CDR (Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks-Cloud Classification System-Climate Data Record)을 이용하여 한반도에 대한 격자형 확률강수량을 산정하였다. 고려된 기간은 1983년부터 2020년까지 총 38개년이다. 사용된 자료의 공간해상도는 0.04°이며, 시간해상도는 3시간이다. 확률분포로는 빈도해석을 위해 일반적으로 사용되고 있는 Gumbel 분포를 사용하였으며, 매개변수 추정을 위해 확률가중모멘트법을 적용하였다. 지속기간은 3시간부터 144시간 까지, 재현기간은 2년부터 500년까지가 고려되었다. 이러한 방식으로 산정된 결과를 지상우량계인 ASOS (Automated Synoptic Observing System) 기상관측소의 강수 자료를 활용하여 산정된 확률강수량과 비교·검토하였다. 그 결과, PERSIANN-CCS-CDR 자료로부터 산정된 Gumbel 분포의 매개변수들은 지속기간이 증가함에 따라 ASOS의 결과들과 유사한 양상을 보였으며 이를 토대로 얻어진 확률강수량은 지속기간이 짧은 경우 다소 큰 차이를 보였으나, 지속기간이 18 h 이상인 경우 그 차이는 약 20% 이내로 감소함을 확인하였다. 추가적으로, 남북한 차이를 살펴보았으며 Gumbel 분포 매개변수들 중 위치 매개변수의 차이가 두드러지게 나타남을 확인하였다. 지속기간의 증가에 따른 북한의 확률강수량이 상대적으로 작게 나타났으며, 지속기간 3 h 기준 남한의 84%, 지속기간 144 h 기준 70~75% 수준인 것으로 확인되었다.

• Journal of Animal Science and Technology
• /
• 제48권1호
• /
• pp.29-38
• /
• 2006

본 연구는 축산연구소 한우시험장에서 출생한 한우 암소로부터 시간적인 간격을 두고 조사된 체중측정 기록에 대해 비선형의 성장곡선 모형을 적용하여 추정된 성장곡선 모수의 유전적인 경향을 평가하기 위해 실시하였다. 본 연구에서 성장곡선 모수들의 유전력 추정은 단형질 모형과 다형질 모형으로 분석하였으며 단형질 모형의 경우 선형모형은 출생년도－계절과 어미소의 나이의 효과가 포함된 동기우 집단을 고정효과로 상가적 개체유전효과를 임의효과로 하는 Model I과 Model I에 최종 체중측정시의 일령을 일차식 공변이로 추가시킨 Model II 등 두 가지 분석모형을, 그리고 다형질 모형의 경우 출생년도－계절과 어미소 나이의 효과를 고정효과로 하는 Model I과 Model I에 최종 측정시 일령을 공변이로 추가시킨 Model II 등 두 가지 분석모형을 이용하였는데, 단형질 모형의 Model I을 이용하여 추정된 성장곡선 모수 중 성숙체중의 유전력은 모형별로 0.09～0.22의 범위였으며, 성장비는 0.07～0.13의 범위였고, 성숙률은 0.05～0.07의 범위였다. 그리고 Model II를 이용하였을 때는 모형별로 성숙체중이 0.12～0.28, 성장비가 0.07～0.13의 범위였으며 성숙률은 0.12로 Gompertz 모형이나, Von Bertalanffy 모형 그리고 Logistic 모형이 모두 같았다. 한편 다형질 모형의 Model I을 이용하여 추정된 성장곡선모수 중 성숙체중의 유전력은 모형별로 0.09~0.17의 범위였으며, 성장비는 0.07~ 0.13의 범위였고, 성숙률은 0.06으로 세모형이 같았다. 그리고 Model II를 이용하였을 때는 성숙체중은 0.10～0.23, 성장비는 0.00～0.01, 성숙률은 0.06～0.11의 범위였다. 본 연구에서 추정된 성장곡선 모수들의 유전력은 외국의 육우에서 보고되는 유전력보다 낮았으며 한우수소에서 보고된 것과 유사한 결과였다. 그리고 Model II는 성숙체중과 성숙률의 유전력이 Model I보다 크게 추정되어 최종 측정시 일령을 공변이로 첨가할 경우 성숙체중과 성숙률의 상가적유전분산의 크기를 증가시키는 결과를 얻었다. 각 월령별 실측체중과 각 성장곡선 모형에 적합시켜 추정한 월령별 체중들에 대해서는 단형질모형을 이용하여 유전력을 추정하였는데 분석에 이용된 선형모형은 출생년도－계절과 어미소의 나이의 효과가 포함된 동기우 집단을 고정효과로 상가적 개체유전효과를 임의효과로 하는 Model I이었다. 실측체중의 경우 24개월령 체중만 0.52로 한우에 대한 타 연구자들의 결과에 비해 높았고 그 외의 월령별 체중은 타 연구자들의 결과 범위에 포함되는 성적이었다. 각 성장곡선모형으로 적합시켜 구한 생시체중의 유전력은 Gom- pertz 모형이 0.08, Von Bertalanffy 모형이 0.08 그리고 Logistic 모형이 0.06으로서 실측된 생시체중의 유전력 0.27에 비해 높게 나타났다. 그리고 실측체중의 경우 24개월령 체중의 유전력이 0.52, 36개월령 체중의 유전력이 0.32로서 36개월령의 유전력이 24개월령의 유전력에 비해 낮아지는데 적합체중의 경우에는 36개월령 체중의 유전력과 24개월령 체중의 유전력의 차이가 없거나(Gompertz 모형), 오히려 36개월령 체중이 24개월령 체중에 비해 유전력 추정치가 높아지고 있다(Von Bertalanffy 모형, Logistic 모형). 이렇게 적합체중에서 생시의 유전력이 낮아지거나 실측체중의 경우처럼 24개월령 체중보다 36개월령 체중의 유전력이 낮아지지 않는 것은 본 연구에 이용된 각 성장모형들이 생시체중을 실측체중보다 높게 추정하고 36개월령 체중을 낮게 추정하기 때문인 것으로 판단된다. 본 연구 결과로 볼 때 성장곡선 모형으로 추정된 월령별 체중들간에 유전력의 차이가 나타나 한우 암소의 성장예측을 위한 성장곡선의 사용은 중요하게 다루어져야 할 것으로 사료되며, 성장곡선 모수들에 대한 유전능력을 예측하여 한우 암소집단에 대한 선발과 도태의 기준으로 활용한다면 암소의 육용형 개량에 도움이 될 것으로 사료된다.

• Journal of Animal Science and Technology
• /
• 제52권5호
• /
• pp.349-356
• /
• 2010

본 연구는 우리나라 중부지역에 소재한 민간 종돈장에서 1998년부터 2008년까지 분만한 요크셔종 26,390복과 랜드레이스종 26,713복의 번식성적을 근거로 산자수와 성비에 대한 유전력과 육종가를 추정하고, 각 모형별로 추정된 육종가를 비교하고자 실시하였다. 본 연구 결과를 요약하면 다음과 같다. 요크셔종과 랜드레이스종의 총산자수에 대한 평균과 표준오차는 각각 $11.35{\pm}0.02$두, $10.97{\pm}0.02$두로 조사되었으며, 생시 생존자돈수에 대한 평균과 표준오차는 각각 $10.04{\pm}0.02$두, $9.98{\pm}0.02$두로 조사되었다. 또한 생시 생존 자돈수 중에서 암컷이 차지하는 비율로 계산한 성비의 평균치는 요크셔종에서 $45.75{\pm}0.11%$, 그리고 랜드레이스종에서 $45.75{\pm}0.11%$로 조사되어 두 품종 모두 암컷의 비율이 수컷의 비율보다 낮게 나타났다. 모델 l을 적용하여 분석한 총산자수에 대한 유전력은 요크셔종과 랜드레이스종에서 각각 $0.243{\pm}0.009$, $0.241{\pm}0.009$로 추정되어 두 품종에서 모두 다른 모델들(모델 2~모델 5)을 적용하여 추정된 유전력 보다 높게 추정되었다. 모델 3, 4, 5를 적용하여 분석한 총산자수에 대한 유전력과 반복력은 요크셔종에서 각각 $0.096{\pm}0.012{\sim}0.103{\pm}0.013$ 및 $0.211{\pm}0.008{\sim}0.215{\pm}0.008$의 범위로 추정되었고, 랜드레이스종에서 각각 $0.108{\pm}0.013{\sim}0.114{\pm}0.013$ 및 $0.210{\pm}0.008{\sim}0.214{\pm}0.008$의 범위로 추정되어 두 품종 모두 모델들 간(모델 3~모델 5)의 유전력과 반복력 추정치는 큰 차이를 보이지 않았다. 모델 1을 적용하여 분석한 생시 생존 자돈수에 대한 유전력은 요크셔종과 랜드레이스종에서 각각 $0.192{\pm}0.009$ 그리고 $0.209{\pm}0.009$로 다른 모델들을 이용하여 분석된 유전력에 비해 높게 추정되었다. 모델 2를 이용하여 분석한 유전력과 반복력은 요크셔종에서 $0.102{\pm}0.012$ 및 $0.170{\pm}0.008$, 랜드레이스종의 경우 $0.091{\pm}0.012$ 및 $0.179{\pm}0.008$로 추정되었고, 모델 3, 4, 5를 이용하여 추정한 유전력과 반복력은 요크셔종에서 $0.096{\pm}0.012{\sim}0.099{\pm}0.012$ 및 $0.188{\pm}0.008{\sim}0.193{\pm}0.008$의 범위로 추정되었으며, 랜드레이스종의 경우 $0.092{\pm}0.012{\sim}0.098{\pm}0.012$ 및 $0.193{\pm}0.008{\sim}0.196{\pm}0.008$의 범위로 추정되어 두 품종 모두 모델 2, 3, 4, 5간의 유전력과 반복력은 큰 차이를 보이지 않았다. 돼지의 산자수와 관련된 유전력은 환경적인 영향을 많이 받는 것으로 알려져 있는데 본 연구에서도 잔차의 분산이 매우 높게 추정되었기 때문에 저도의 유전력과 반복력이 추정되는 결과를 나타내었다. 모델별로 추정된 총산자수와 생시 생존 자돈수에 대한 육종가를 기준으로 각 개체의 순위를 정한 후 이 순위간의 상관을 구하였을 때 두 품종 모두 모델 1과 2는 다른 모델과 정의 상관을 보였지만 모델 3, 4, 5 간의 순위 상관 계수보다 낮은 경향을 나타냈으며, 모델 3, 4, 5 간의 육종가 순위 상관은 0.99 이상의 고도의 정의 상판을 나타내어 모델 3, 4, 5를 이용하여 추정된 개체들의 육종가 순위는 모델 간에 큰 차이를 보이지 않을 것으로 판단된다. 모델 1~모델 6을 적용하여 추정한 성비에 대한 유전력은 요크셔종과 랜드레이스종에서 각각 $0.002{\pm}0.002{\sim}0.003{\pm}0.002$, $0.001{\pm}0.002{\sim}0.003{\pm}0.002$의 범위로 추정되어 어떤 한 모델을 적용 하더라도 0에 가깝게 추정되었다. 따라서 선발을 통해 성비를 조절 하는 것은 불가능하다고 판단된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.