• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.315-320
• /
• 2009

A computational investigation is conducted on free convection from a thin plate having a surface heat source. The thermal configuration simulates the recently-proposed transparent film heater made of a single-walled carbon nanotube film on a glass substrate. The Navier-Stokes computations are carried out to study laminar free convection from the heater. Parallel numerical experiments are performed by using a simplified design analysis model which solve the conduction equation with the boundary conditions utilizing several existing correlations for convective heat transfer coefficient. Comparison leads to the most suitable boundary condition for the thermal model to evaluate the performance evaluation of a transparent thin-film heater.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.6
• /
• pp.291-297
• /
• 2003

This paper presents a current-source-inverter based on a buck-boost configuration and its application for residential photovoltaic system. The proposed circuit has five switches. Among them, only one switch acts as chopping, and the other determine the polarity of output; therefore, it can reduce the switching loss. Because the input inductor current is operated on the discontinuous conduction mode, high power factor can be achieved without additional input current controller. So the overall system shows a simple structure. The operational modes are analysed in depth, and then it was verified through the experimental results using a 150 [W] prototype equipped with digital signal processor TMS320F241.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.13-16
• /
• 1998

An anomalous current characteristics which show the superposition of a low current level and high current level at the subthreshold region when SONOSFETs are in memory states were investigated. We have assumed this phenomena were resulted from the effect of parasitic transistors by LOCOS isolation and were modeled to a parallel equivalent circuit of one memory transistor and two parasitic transistors. Theoretical curves are well fitted in measured log I$_{D}$-V$_{G}$ curves independent of channel width of memory devices. The difference between low current level and high current level is apparently decreased with decrease of channel width of devices because parasitic devices dominantly contribute to the current conduction with decrease of channel width of memory devices. As a result, we concluded that the LOCOS isolation has to selectively adopt in the design of process for charge-trap type NVSM.VSM.

• Progress in Superconductivity
• /
• v.5 no.2
• /
• pp.144-148
• /
• 2004

Uniform current distribution among conductor layers in HTS cables using IPTs (inter-phase transformers) was investigated. Conventional methods for current distribution, in which resistors are inserted to conductor layers, causes additional loss. In contrast, IPTs, which use magnetic coupling, make it possible that the current in parallel circuits is distributed uniformly with any load, and minimize the loss. In this study, IPTs were designed and fabricated for examination of uniform current distribution in the conductor layers of HTS cables. The ITP was designed through calculation of its impedance that can cancel the inductance of the conduction layers. The experimental setup consisted of four IPTs and four inductors that simulate the conductor layer inductance. Each layer was designed to feed 10 A. We examined the behavior of current distribution with IPTs for various layer inductances.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.713-718
• /
• 1998

Due to high power ratings and low conduction loss, the IGBT has become more attractive in high power applications. However, its slower characteristics than those of MOSFET cause severe switching losses and switching frequency limitation. This paper proposes the IGBT's soft switching concept with the help of MOSFET, where each of the IGBT and MOSFET plays its role during on-periods and switching instants. Also, the switching losses are analyzed by using the linearized modeling and the modeling and the operations of a converter are investigated to confirm the soft switching of IGBT's.

• Journal of Power Electronics
• /
• v.12 no.2
• /
• pp.258-267
• /
• 2012

An interleaved single-stage AC/DC converter with a boost converter and an asymmetrical half-bridge topology is presented to achieve power factor correction, zero voltage switching (ZVS) and load voltage regulation. Asymmetric pulse-width modulation (PWM) is adopted to achieve ZVS turn-on for all of the switches and to increase circuit efficiency. Two ZVS half-bridge converters with interleaved PWM are connected in parallel to reduce the ripple current at input and output sides, to control the output voltage at a desired value and to achieve load current sharing. A center-tapped rectifier is adopted at the secondary side of the transformers to achieve full-wave rectification. The boost converter is operated in discontinuous conduction mode (DCM) to automatically draw a sinusoidal line current from an AC source with a high power factor and a low current distortion. Finally, a 240W converter with the proposed topology has been implemented to verify the performance and feasibility of the proposed converter.

• Journal of Korean Vacuum Science & Technology
• /
• v.1 no.1
• /
• pp.19-23
• /
• 1997

The conductance of a microscopic constriction in a two-dimensional electron gas is obtained as a function of both the constriction width and curvature. When the quantized conductance G at plateaus is given by the channel number Nc times the quantum unit 2e2/h, Nc is found to be a function of not only the width and but also the curvature. At a given W, Nc increases by one whenever the constriction curvature decreases by about a certain value. Until the shape smoothness becomes comparable to the two parallel boundaries, there exist more channels avaliable for conduction in a smaller-curvature constriction than in a larger-curvature one. This result is very interesting because Nc has been considered to depend on the width W only. this reflects that the number of the quantized transverse levels depend o both the constriction width and curvature in a two-dimensional electron gas.

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.39-45
• /
• 2012

In this paper the digital control scheme of interleaved PFC for 3-phase modular UPS is presented. The interleaved PFC is composed of two identical PFC connected in parallel and each PFC is controlled by the interleaved switching signals which have the same switching frequency and the $180^{\circ}$ phase difference. As a consequence of the interleaving operation, the Interleaved PFC exhibits both lower current ripple at the input side and lower voltage ripple at the outside. Therefore, the switching and conduction losses as well as EMI levels can be significantly decreased. Simulation and experimental results verify the usefulness of the interleaved PFC.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.386-387
• /
• 2013

This paper provides a comparison of high power semiconductor devices in 5MW-class Permanent Magnet Synchronous Generator (PMSG) Medium Voltage (MV) wind turbines. High power semiconductor devices of IGBT module type, IGBT press-pack type, and IGCT of both 4.5kV and 6.5kV are considered in this paper. Benchmarking is performed based on neutral-point clamed 3-level back-to-back type voltage source converter supplied from grid voltage of 4160V. The feasible number of semiconductor devices in parallel is designed through the loss analysis considering both conduction and switching losses under the given operating conditions of 5MW-class PMSG wind turbines, particularly for the application in offshore wind farms. The loss analysis is confirmed through PLECS simulations. The comparison result shows that IGBT press-pack type semiconductor device has the highest efficiency and IGCT has the lowest cost factor considering the necessary auxiliary components.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.2
• /
• pp.74-79
• /
• 2002

We have been analyzed the interference problems already in steady state, especially AC corrosion when the gas pipeline is burred with power cable in the same submarine tunnel. In the next stage, we analyze the induced voltage in a fault condition of 154[kV] underground T/L. This paper presents the results of them which are limitation of safety voltage. meodeling of power cables, gas pipeline and grounding systems, analysis of induced voltage in a fault condition, and protection of Power line system.