• 제목/요약/키워드: paper-ash mortar

검색결과 54건 처리시간 0.022초

광물질 혼화재를 혼합한 모르타르의 유변학적 특성 (Rheology properties of mortar using mineral admixture)

  • 김용직;김영진;최연왕
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.341-342
    • /
    • 2010
  • 본 연구는 광물질혼화재를 사용한 모르타르의 유변학적 특성을 검토하였다. 검토 항목으로는 모르타르의 점도, 항복값 및 재령별 압축강도를 측정하여 검토하였다.

  • PDF

시멘트 혼화재로서 제지슬러지 소각재의 재활용 특성 (A Study on the Reusability of Incinerated Paper Mill Sludge Ash as Cement Additive)

  • 주소영;연익준;이민희;박준규;김광렬
    • 환경위생공학
    • /
    • 제18권2호
    • /
    • pp.34-41
    • /
    • 2003
  • The purpose of this study is to examine the effect of stabilization disposal and recycling on incinerated paper mill sludge ash as cement additives. It was investigated chemical(pH, ICP, TGA XRD) and physical(PDA, SEM) characteristics of the incineration ash. And the pozzolanic characteristics of incineration ash was applied to cement as additive to increase the compressive strength. The results were that the pH characteristic of incineration ash was strong alkalinity, the content of silica and alumina as a pozzolanic material was 50.97%, and the average particle size was $5.03{\mu}m$ respectively. When the ash contents as cement additive were varied in 0~15%(wt) of cement weight to explore the effect of the compressive strength on the solidified cement mortar, the proper amount of the incineration ash substituted was about 5~l0%(wt). Therefore we found that using the incineration ash as cement additive obtains the recycling of waste material, the stabilization disposal, the reduction of waste disposal expense, and the protection of environmental problem, too.

CSA 및 제지애쉬를 혼합재료 사용한 플라이애쉬 시멘트 모르타르의 수화 및 강도 특성에 관한 연구 (Study on the Hydration and Strength Properties of Fly-ash Modified Cement Paste and Mortar Using a CSA and Pulp Ash)

  • 송태협;이세현;서치호
    • 한국건설순환자원학회논문집
    • /
    • 제1권1호
    • /
    • pp.81-88
    • /
    • 2005
  • 플라이애쉬를 콘크리트 혼화재로 사용할 경우 수화열의 저감, 내화학성의 증대, 건조수축의 저감, 장기강도의 개선 등의 여러 가지 장점이 있으나, 3일 이내의 초기강도 발현이 낮은 점과 성분중의 미연탄소분의 영향으로 인하여 AE제 흡착에 의한 공기량의 변동 등의 몇 가지 이유로 인하여 일부 공사를 제외하고는 일반적으로 10% 전후만을 사용하고 있다. 본 연구에서는 플라이애쉬 사용량을 시멘트량의 최대 30%까지 치환하고, 이때 발생할 수 있는 초기강도를 개선하기 위하여 무기질계 혼합재인 CSA 및 제지애쉬를 플라이애쉬 사용량의 8, 20%를 혼합하여 조기강도 특성 및 미소수화열 발생에 의한 조기강도 개선 가능성에 분석을 하였다. 미소수화열 측정결과 플라이애쉬를 10, 20, 30% 치환한 경우 강도에 영향을 줄 수 있는 제 1 Peak의 발열량 및 발현 시간이 OPC 배합보다 낮고 늦게 나타나고 있으며, CSA 및 제지애시를 혼입할 경우 발열량이 증가하고 시간도 단축되는 것으로 나타났다. 특히 제지애시를 혼합할 경우 강도에 영향을 줄 수 있는 제 2 Peak의 발현 시간 및 발열량이 OPC와 유사한 것으로 나타났다. 응결시간의 경우 CSA 및 제지애시를 혼입할 경우 플라이애쉬 배합보다 단축되는 것으로 나타났으며, 이는 미소수화열 발열량과 상관성이 있는 것으로 나타났다. 압축강도의 경우 플라이애쉬 배합에 CSA 및 제지애시를 혼입항 경우 조기강도 증진효과가 있는 것으로 나타났으며, 특히 제지애시를 혼입할 경우 강도 증진이 효과적으로 나타나는 것으로 분석되었다. 따라서 플라이애쉬를 다량 사용할 경우 이에 따르는 조기강도 하락 방지에 CSA 및 제지애시가 효과적으로 사용될 수 있을 것으로 검토되었다.

  • PDF

등가재령 방법에 의한 플라이애시를 치환한 시멘트 모르타르의 강도 증진 해석 (Estimation of Compressive Strength of the Fly Ash Substitution Cement Mortar by Equivalent age)

  • 한민철
    • 한국건설순환자원학회논문집
    • /
    • 제7권4호
    • /
    • pp.121-127
    • /
    • 2012
  • 본 연구에서는 플라이애시를 치환한 시멘트 모르터의 양생온도에 따른 강도증진을 검토하기 위하여 등가재령방법에 의한 강도증진해석을 실시하였다. 플라이애시를 30% 치환한 시멘트모르터의 겉보기활성화에너지를 ASTM C 1074 방법에 의하여 산정한 결과 34.75KJ/mol로 산정되었고, 이를 토대로 Plowman 모델과 Gompertz 모델을 이용하여 해석한 결과 해석치가 측정치를 양호하게 추정함을 알 수 있었고 특히 Gompertz 모델식이 보다 양호한 추정 정밀도를 갖는 것으로 확인되었다.

  • PDF

Cementing Efficiency of Fly-ash in Mortar Matrix According to Binder-Water Ratio and Fly-ash Replacement Ratio

  • Cho, Hong-Bum;Jee, Nam-Yong
    • 한국건축시공학회지
    • /
    • 제12권2호
    • /
    • pp.194-202
    • /
    • 2012
  • This paper predicts the cementing efficiency of fly-ash(FA) based on mortar test considering binder-water ratio and FA replacement ratio as experimental variables. The cementing efficiency prediction model proposed by statistical analysis enables us to estimate the value according to the binder-water ratio and FA replacement ratio of matrix. When FA replacement ratio is the same, the lower the binder-water ratio, the higher the estimated cementing efficiency. There are significant differences in the values according to binder-water ratio at FA replacement ratios of 15% or less, but there are almost no differences when FA replacement ratio is more than 15%. As the binder-water ratio increases, the variations in the values according to FA replacement ratio are great at FA replacement ratios of 15% or less. As the FA replacement ratios increase, the values increase for FA replacement ratios of 15% or less, but decrease for more than 15%. The values range from -0.71 to 1.24 at binder-water ratio of 1.67-2.86 and FA replacement ratio of 0-70%. The RMSE of the 28-day compressive strength predicted by modified water-cement ratio is 2.2 MPa. The values can be trusted, as there is good agreement between predicted strength and experimental strength.

화학적 결합에 의한 Fly ash 경화체의 강도 발현 메카니즘 (Strength Behaviour and Hardening Mechanism of Chemical Bonded Fly Ash Mortar)

  • 조병완;문린곤;박승국;고희철
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
    • /
    • pp.373-376
    • /
    • 2005
  • The discharge of fly ash that is produced by coal-fired electric power plants is rapidly increasing in Korea. The utilization of fly ash in the raw materials would contribute to the elimination of an environmental problem and to the development of new high-performance materials. Fly ash consists of a glass phase. As it is produced from high temperature, it is a chemically stable material. Fly ash mostly consists of $SiO_{2}$ and $Al_{2}O_{3}$, and it assumes the form of an oxide in the inside of fly ash. Because this reaction has not broken out by itself, it is need to supply it with additional $OH^{-}$ through alkali activators. We used alkali activators for supplying it with additional $OH^{-}$. This paper concentrated on the strength development according to the kind of chemical activators, the curing temperature, the heat curing time.

  • PDF

플라이애쉬 기반(基盤) 알칼리 활성(活性) 모르타르의 역학적(力學的) 특성(特性) 및 미세구조(微細構造) 분석(分析) (Analysis of Mechanical Properties and Micro structure of Fly Ash Based Alkali-activated Mortar)

  • 류금성;고경택;정영수
    • 자원리싸이클링
    • /
    • 제21권3호
    • /
    • pp.28-38
    • /
    • 2012
  • 이 논문에서는 시멘트를 전혀 사용하지 않고 결합재로서 플라이애쉬를 100% 사용한 알칼리 활성 콘크리트를 개발할 목적으로 알칼리 활성화제의 화학적 변화에 따른 모르타르의 압축강도에 미치는 영향과 SEM/ EDS 및 XRD 등의 미세구조 분석을 검토하였다. 그 결과, 몰농도가 높을수록 초기강도에 큰 영향을 미치는 것으로 분석되었고, 압축강도의 크기에 비례하여 $Si^{4+}$$Al^{3+}$량이 용출되었다. 또한 SEM 및 EDS로 조직을 분석한 결과 모르타르의 조직구조에 큰 영향을 미치는 성분은 Al 및 Si 성분이었고, XRD 분석결과 활성화제 성분차이에 따른 세기(intensity)의 차이는 거의 없는 것으로 나타났다.

알칼리 활성화제 종류가 시멘트 ZERO 모르타르에 미치는 영향 (The Effect on the Kind of Alkali-Activator of Cement ZERO Mortar)

  • 류금성;강현진;고경택;강수태;김성욱;이장화
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.397-398
    • /
    • 2009
  • 최근 알칼리 활성 콘크리트에 관한 연구가 활발히 진행되고 있는 실정이다. 본 연구에서는 여러 종류의 알칼리 활성화제가 플라이애시 기반 시멘트 ZERO 모르타르에 미치는 영향을 검토하였다.

  • PDF

미분쇄 바텀애시 기반 지오폴리머 모르타르 특성에 관한 연구 (Study on Characteristics of Fine Bottom Ash Based Geopolymer Mortar)

  • 임귀환;이정배;정현규;김성수
    • 한국건설순환자원학회논문집
    • /
    • 제4권4호
    • /
    • pp.418-424
    • /
    • 2016
  • 본 연구는 화력발전소에서 배출되는 바텀애시의 재활용에 대한 실험적 연구이다. 바텀애시는 플라이애시 보다 다공성 및 높은 흡수율 등의 특징으로 재활용에 대한 연구가 제한적인 실정이다. 본 논문에서는 바텀애시를 결합재로 사용하기 위해 비표면적을 $4,000cm^2/g$까지 미분쇄하였으며, 바텀애시 기반 지오폴리머 모르타르의 플로우, 압축강도 시험 및 미세구조 분석을 실시하였다. 지오폴리머 모르타르의 플로우 측정 결과 활성화제 몰농도가 증가함에 따라 추가배합수가 증가하여 플로우 값이 향상되었다. 압축강도를 검토한 결과 양생온도와 몰농도가 높을수록 압축강도가 증가하였고, 미세구조 분석을 통하여 지오폴리머 반응으로 생성된 지오폴리머 겔을 확인할 수 있었다. 따라서 활성화제 사용 시 지오폴리머 반응은 온도 상승에 비례하여 촉진되기 때문에 적절한 활성화제 몰농도와 고온양생을 통하여 바텀애시 기반 지오폴리머 콘크리트의 제작이 가능할 것으로 판단된다.