• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.289-296
• /
• 2017

Pulp and paper industry produces large volumes of wastewater and residual sludge waste, resulting in many issues in relation to wastewater treatment and sludge disposal. Contaminants in pulp and paper wastewater include effluent solids, sediments, chemical oxygen demand (COD), and biological oxygen demand (BOD), which should be treated by wastewater treatment processes such as coagulation and biological treatment. However, few works have been attempted to predict the treatment efficiency of pulp and paper wastewater. Accordingly, this study presented empirical models based on experimental data in laboratory-scale coagulation tests and compared them with statistical models such as artificial neural network (ANN). Results showed that the water quality parameters such as turbidity, suspended solids, COD, and UVA can be predicted using either linear or expoential regression models. Nevertheless, the accuracies for turbidity and UVA predictions were relatively lower than those for SS and COD. On the other hand, ANN showed higher accuracies than the emprical models for all water parameters. However, it seems that two kinds of models should be used together to provide more accurate information on the treatment efficiency of pulp and paper wastewater.

• Journal of Korean Society on Water Environment
• /
• v.29 no.1
• /
• pp.127-137
• /
• 2013

Reuse of wastewater will intensify in the coming decades due to water shortage, the change of climatic conditions, the need for industrial and agricultural use and the necessity of improving health and environmental conditions for the growing population. This paper considers (a) the status and trends of wastewater reuse and reclamation in the world, (b) case studies of wastewater reuse projects, (c) analysis of technology level, (d) forecast of global market, and (e) the future views and directions in development of wastewater reuse technologies. Based on the available documented literature, this paper provides a review assessment of the current status of the wastewater treatment processes including potential applications for reuse. Key challenges for both wastewater treatment and reuse are also discussed in the paper and include recommendations, e.g. cost, effluent water quality, energy use and technical solutions, for future developments.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.2
• /
• pp.157-163
• /
• 2000

An experimental study was conducted to evaluate the treatment efficiency of paper-mill wastewater using pure oxygen activated sludge process. Effects of hydraulic retention time (HRT) and organic loading on process performance and kinetics were investigated. The raw paper-mill wastewater(BOD concentration ${\leq}500mg/L$) and the effluent from dissolved air flotation(DAF) treatment(BOD concentration ${\geq}500mg/L$) were used as influent for pure oxygen activated sludge process. Average BOD removal efficiencies were above 89.3% under 6hours or longer of HRT, while under 3hours of HRT they decreased to about 82%. With the effluent from DAF process, the half saturation constants($K_S$) and the maximum specific substrate removal rate($K_{max}$) were 85 mg/L and 2.25 L/day, respectively. However, with the raw paper-mill wastewater, both $K_S$ and $K_{max}$ increased to 156 mg/L and 3.84 L/day, respectively. The microbial yield coefficient(Y) and the decay coefficient($K_d$) were 0.46 gVSS/gBOD and 0.03 L/day, respectively, with effluent from DAF process. While, Y and $K_d$ were 0.24 gVSS/gBOD and 0.035 L/day, respectively, with the raw paper-mill wastewater.

• Journal of Forest and Environmental Science
• /
• v.23 no.2
• /
• pp.119-122
• /
• 2007

Actually, about 45% of total costs for wastewater treatment in a papermaking mill is spent for sludge disposal and the cost of chemicals used to improve the dewaterability of sludge takes much part of it. In order to reduce sludge disposal cost and to improve the efficiency of sludge treatment, it is necessary to minimize the amount of water contained within the sludge and hence to improve the dewaterability of the sludge. The objective of this study was to elucidate the way of improving the dewaterability of sludge. Three types of wastewater from a tissue paper mill, a printing paper mill and a newsprint mill were used and two types of high molecular weight flocculants (anionic PAM and cationic PAM) were used to treat the wastewater. Dewaterability of sludge was evaluated by measuring floc strength.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.24-33
• /
• 2015

This study aims to suggest wastewater treatment options for diaper recycling by identifying characteristic analysis of wastewater from diaper recycling process and efficiency evaluation of wastewater treatment units. The wastewater characteristic analysis showed that the concentration of organic pollutants and ionic materials were very high comparing to seawater. Through the investigation of similar wastewater treatment, six treatment units were identified to reduce pollutants. It is found UF(ultra-filtration), DAF(dissolved air flotation), fenton oxidation, electro-coagulation and chemical-coagulation are effective in reducing organic pollutants while membrane system and ion exchanger are effective in reducing ionic materials. Even though the target of water quality should be secured in terms of managing organic pollutants level, the application of treatment unit for reducing ionic material needs lots of considerations. This result suggests that reuse of pulping wastewater after controlling organic pollutants is better than direct discharge of pulping wastewater. To select the appropriate wastewater treatment unit, an economic analysis about operation condition, wastewater flow, cost, efficiency should be considered.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.1
• /
• pp.41-46
• /
• 2008

In this study, dewaterability, one of the important properties of wastewater sludge, was investigated using a simple capillary suction time (CST) measurement method. It turned out that one could use the results of CST to find optimum flocculants ratio to improve drainage in wastewater treatment for the printing paper, tissue paper, and newsprint paper mill. Since the optimum ratio of flocculants could be determined with the value of CST, COD removal efficiency could be improved and optimum floc strength could be achieved with precise ratio of flocculants. It was thus that using CST for determining the optimum ratio of flocculants could be economical by reducing the amount of flocculants. Dewaterability could be measured within several seconds using the values of CST in a precise way. The dewaterability could also be useful in investigating the optimum ratio of flocculants.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.274-279
• /
• 2000

A Saccharomyces cerevisiae isolated from a feed additive yeast product was cultivated in a Korean paper digestion wastewater in order to investigate the possibility of using it as substrate for the yeast. The yeast couldn't grow in the wastewater. It could grow in the wastewater diluted and the optimum dilution rate was 7.5 In batch cultivation with the jar fermenter the maximum total cell count was $1.34{\times}107/mL$ was obtained by the addition of undiluted digestion wastewater. By adding $(NH_4)_2S0_4 and KH_2P0_4$together with the undiluted wastewater the maximum cell concentration could be obtained faster.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.16-29
• /
• 2009

This paper describes characteristics of pollutants in wastewater from the pulp and paper industry and biological technologies for the wastewater treatment. The wastewater from the pulp and paper industry contains high concentrations of biochemical oxygen demand (BOD) and chemical oxygen demand (COD) and shows high toxicity and strong black-brown color. In particular, organic chlorinated compounds such as dioxins and furans may be formed by the chlorination of lignin in wood chips. Thus the pulp and paper industry is recently trending toward total chlorine-free (TCF) bleaching processes. All biological technologies for pulp and paper wastewater treatment are based on the contact between wastewater and bacteria, which feed on organic materials in the wastewater, thus they reduce BOD concentration in it. Both aerobic and anaerobic treatments were found to be effective for the wastewater treatment. Furthermore, advanced technologies such as fungal application and combined biological-filtration process have been also introduced to the wastewater treatment field. These technologies would be useful for water recycling to reduce water consumption throughout pulp and paper making process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.3
• /
• pp.55-62
• /
• 2015

Paper mulberry fibers have been used as fibrous raw materials for manufacturing traditional handmade paper, hanji for a long time. Compared to wood pulp fibers, pulp fibers from mulberry bast tissue have some benefits in physical and chemical properties due to their high D.P (degree of polymerization), M.W (molecule weight) and long fiber length. Specially, Korean handmade hanji shows outstanding characteristics in mechanical tensile strength, folding endurance, flexibility and long sustainable conservation properties. Therefore, hanji is widely applied to daily supplies, hygienic goods, medical supplies, clothing industries and so on. Recently, the potential demand of mulberry pulp fibers is more and more increased on the strength of high application fields. This study was focused on the possibility of wastewater recycling in unit operation systems for the development of automated mass production line. The properties and environmental loads of wastewater from debarking, cooking, bleaching and screening process were analyzed by means of COD, conductivity, turbidity and solid materials. The wastewater from debarking and cooking process was comparatively high in pollution load, and would be treated by additional approaches of chemico-physical method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.2 s.120
• /
• pp.9-16
• /
• 2007

Biological treatment using the activated sludge method and biofilm process has been developed for paper wastewater treatment. It is known that a water treatment using biofilm process has a high efficiency be-cause a great deal of microorganism could adhere to media. It is also known that various plastics such as polyurethane and polyethylene have been used as the media. In this study polyethylene was used as a media and rice straw an additive agent to improve porous and hydrophilic properties of the media for waste water treatment. Porosity and hydrophilic characteristics of polyethylene was increased as rice straw was added to polyethylene. Paper wastewater was then treated with newly developed environment materials. Rice straw showed excellent results in waste water treatment in various media. This environmentally friendly material prepared by polyethylene and rice straw could show similar results to those of a commercial porous polyurethane foam in wastewater treatment.