• Journal of the Korean Wood Science and Technology
• /
• 제29권2호
• /
• pp.109-117
• /
• 2001

한지(韓紙) 제조(製造) 공정(工程) 중에서 발생하는 백색 슬러지와 흑색 슬러지를 각각 일정비율(10, 20, 30, 40%)로 목재(木材) 파티클과 혼합(混合)하고 PMDI, 요소 및 페놀수지를 이용하여 각각 목표비중(目標比重) 0.60, 0.75, 0.90 별로 복합(複合)보드를 제조(製造)하여 물리적(物理的) 성질(性質)을 측정 분석한 결과 흡수길이변화율은 대조보드에 비해 크게 증가하지 않았으며 흡수두께팽창율은 PMDI를 적용한 백색 슬러지 목재(木材) 파티클 복합(複合)보드가 가장 낮은 값을 보였고 흡수율은 흑색 슬러지 목재(木材) 파티클 복합(複合)보드의 경우 혼합(混合) 비율(比率)이 증가할수록 대체로 감소하는 경향을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.51-62
• /
• 1999

본 연구는 자원환경적인 측면에서 산업폐기물이자 환경오염원인 제지 슬러지를 이용함에 있어 용융형 목질-플라스틱 복합재의 강화충전제로 적용하여 그 사용가능성을 알아보고 또한 복합재의 물성에 대한 기초적인 자료을 제시하는데 그 목적이 있다. 그 결과 제지 슬러지의 혼합비율이 증가할수록 복합재의 밀도는 증가하였으며 제지 슬러지의 입자 크기와 결합제 종류 및 함량은 복합재의 밀도에 크게 영향을 미치지 않았다. 제지 슐러지의 혼합비율이 증가할수록 복합재의 휨강도적 성질은 향상되었으며, 제지 슐러지의 입자 크기가 작을수룩 복합재의 휨강도는 증가하였으나 휨탄성계수는 증가하였다. 또한 복합재의 휨강도적 성질은 결합제의 종류에 관계없이 그 함량이 증가할수록 향상됨을 알 수 있었으며, 결합제의 분자량이 더 큰 Epolene G-3003의 경우 그 효과가 더 큼을 알 수 있었다. 대체로 제지 슬러지의 혼합비율이 증가할수록 복합재의 충격강도는 다소 감소하는 경향을 볼 수 있지만, 전체적으로 notched impact strength는 크게 감소하지는 않았다. unnotched impact strength의 경우 제지 슬러지의 혼합비율이 증가할수록 그 감소 폭이 컸다. 제지 슬러지의 입자크기가 복합재의 충격강도에 미치는 영향을 보면 notched impact strength의 경우 제지 슬러지의 입자 크기에 따라 충격강도에 미치는 영향은 거의 없었으며, unnotched impact strength의 경우 입자 크기가 가장 작은 100mesh 이하일 때 가장 우수하였고 그 다음으로 20~40mesh, 60~80mesh 순이었다. 복합재의 notched impact strength 는 결합제의 종류와 함량에 따라 미치는 영향은 거의 없음을 알 수 있었으나 unnotched impact strength는 Epolene E-43의 경우 첨가량이 증가할수록 충격강도가 감소하였고, Epolene G-3003의 경우는 첨가량이 증가할수록 충격강도가 감소하다가 다시 증가하는 경향을 보였다.

• 한국환경과학회지
• /
• 제11권10호
• /
• pp.1089-1096
• /
• 2002

The objectives of this study were to investigate the desulfurization kinetics of paper sludge and limestone in a fluidized bed reactor according to bed temperature and air velocity. The experimental results were presented as follows ; First, the bed temperature had a great influence on the desulfurization efficiency of limestone and paper sludge. In paper sludge, the optimum condition in desulfurization temperature was at 80$0^{\circ}C$ and in limestone, that was at 850 $^{\circ}C$ or 900 $^{\circ}C$ Second, as air velocity increased, the desulfurization efficiency(or the absorbed amount of sulfur dioxide) by limestone and paper sludge decreased. And the absorbed amount of sulfur dioxide by paper sludge was larger than that of by limestone. Third, as the velocity increased and the optimum desulfurization temperature became, ks and the removal efficiency increased. So, ks, kd highly depended on the air velocity and bed temperature.

• Journal of the Korean Wood Science and Technology
• /
• 제27권2호
• /
• pp.23-30
• /
• 1999

한지제지 공정 중에서 발생하는 백색슬러지와 흑색슬러지를 각각 일정비율(10:90, 20:80, 30:70, 40:60)로 목재 섬유와 혼합하고 PMDI, 요소 및 폐지수지를 이용하여 목표비중 0.60, 0.75, 0.90 별로 복합보드를 제조한 결과 전반적으로 볼 때 백색슬러지를 20% 정도까지 혼합하고 PMDI 수지를 적용하면 통상적인 보드와 유사하거나 오히려 더 좋은 치수안정성을 가지는 것으로 판단된다. 또한 흑색슬러지의 경우는 요소수지를 사용하거나 PMDI 수지의 첨가량을 증가시켜 조절한다면 20%의 슬러지 첨가량까지는 치수안정성 면에서 통상적인 보드와 큰 차이가 없는 보드를 제조할 수 있다고 믿어진다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.37-45
• /
• 1994

The possibility of reusing the paper sludge as a raw material of composition board mixed with cement was investigated. For the measurement of physical and mechanical properties, wood coment board and sludge combinend cement boards were fabricated with the three weigh ratios of paper sludge 10 % (SI), 20 % (S II) and 30 % (S III) to cement weight. For adding the cement hardning, $CaCl_2$ was also added to each mixed paste with the ratio of 1 %, 3 % and 5 % to cement weight, respectively. Crystal formation in paper sludge-, wood-cement composites was observed by scanning electron microscope. The results were summarized as follows. 1. Density and partial compressive strength of each specimens were relatively high in the order of sludge I, sludge II, Korean pine, Italian poplar and sludge III, sludge I, Korean pine, sludge II, Italian poplar and sludge III. 2. The mechanical properties of sludge-cement boards (S I and II) were higher than that of wood-cement boards prepared with Korean pine and Italian poplar. But the mechanical properties of wood-cement boards were improved by the adding of $CaCl_2$. 3. Water absorption and thickness swelling were increased with increase of sludge content to cement weight. 4. In SEM observation, sludge-cement composites showed sufficiently formed crystals but wood-cement composites showed poorly formed crystals.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.51-56
• /
• 1999

This research was carried out to investigate the Hanji sludge(black color)-wood fiber and wood particle composited applied by waste sludges arising from the making process of Hanji (Korea paper). In experimental design, four levels of the mixed ratio of Hanji sludge to wood fiber or wood particle(10:90, 20:80, 30:70 and 40:60), three kinds of the resin(PMDI, urea and phenol resin)and three kinds of the specific gravity(0.6, 0.75 and 0.9) were designed to determine the tensile strength of Hanji sludge-wood fiber and wood particle composites. From the results and discussion, it may be concluded as follows: In Hanji sludge-wood fiber and wood particle composites, tensile strengths showed decreasing tendency absolutely by increasing Hanji sludge additive, but clearly increase with the increase of specific gravity. In Hanji sludge-wood fiber composites, there were no differences between PMDI and urea resin-bonded composites, but phenol resin-boned composites were made possibly until the addition of 30% Hanji sludge. On the other hand, Hnji sludge-wood particle composites(SpGr=0.6) have very low tensile strength values. But they were made favorably until the addition of 20% Hanji sludge in Hanji sludge-wood particle composites(SpGr=0.9).

• 펄프종이기술
• /
• 제42권1호
• /
• pp.1-6
• /
• 2010

Paper industry in Korea produces 14 million tons of paper and 1.3 million tons of sludge per year. Most of them has been treated by incineration, landfilling or ocean dumping. The sludge recycling to minimize the impact on the environment, so its importance is highlighted. In this study, in order to develop a new way of recycling the sludge, it was calcined and the recycled ash was tried to use as papermaking filler. Concerning the yield of calcium carbonate and the brightness and the rheology of the recycled calcination sludge, the optimum calcination conditions were found to be $600^{\circ}C$ and 12 hours. The sludge ash itself was not suitable for papermaking due to its color and low brightness. Thus the ash from the sludge was first mixed with a commercial filler and then utilized for papermaking. The effect of the increased hardness after high temperature treatment on wire abrasion was confirmed.

• Advances in environmental research
• /
• 제9권4호
• /
• pp.285-294
• /
• 2020

Growth of any country rest in the consumption of industrial wastes for its infrastructure amenities. Countries like India positively desires a vital utilization of industrial waste resembling paper sludge in the construction industry to make various building materials. Also, it is the duty of all civil engineers or researchers to attach them in mounting new materials from the waste dumped as land fillings. In every construction project, about 70% of cost accounts for the procurement of materials. If this, can be minimized consequently the cost of construction will certainly be condensed. Research has established that the waste paper sludge can be reused in the construction field for a probable scope. The construction diligences munch through a massive quantity of non-renewable resources. On the additional dispense, more waste paper board sludge ends up in landfills or dumpsites than those recycled. Consequently, waste paper sludge for use as a construction material composes a step towards sustainable development. Keeping this in mind an endeavor has been made to utilize paper board sludge acquired from the paper board industry and used with several pozzolanic and cementitious materials for a specific purpose. The addition of paper sludge has been varied from 0% to 20% by weight of cement. The tests done with the samples expose that four samples showed significant outcomes with remarkable strength and durability properties which guide to move for the next phase of research for producing lightweight tiles.

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.121-127
• /
• 2002

한지제조공정(韓紙製造工程) 중(中)에서 발생(發生)하는 백색 슬러지와 흑색 슬러지를 각각 일정비율(10, 20, 30, 40%)로 목재(木材)파티클과 혼합(混合)하고 PMDI, 요소 및 페놀수지를 이용하여 목표비중(目標比重) 0.60, 0.75, 0.90 별로 복합(複合)보드를 제유(製遺)하여 기포적(機捕的) 성질(性質)을 측정한 결과 파티클보드에 한지(韓紙) 슬러지를 약 20%까지는 혼합(混合)하여 복합재(複合材)를 제조하여도 충분히 가능(可能)하리라 믿어진다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.3-9
• /
• 2002

Paper sludge ash was assured as material of a sort of pozzolan. For the reason of fluidity decrease caused by the strong absorption of paper stooge ash and the decrease of compressive strength in case of using over30% replacement by the weight of cement, paper sludge ash is not suitable for blending material. Therefore, it is necessary to find proper replacement ratios between paper sludge and blast furnace slag to insure compressive compensation and appropriate slump. Accordingly, as varied the blending ratios of paper sludge and blast furnace slag, testing mortar was made. This study was aimed to investigate the possibility of using blending replacement of paper sludge ash and blast furnace slag throughout compressive test, flow test, SEM(Scanning Eletron Microscope), MIP(Mercury Intrusion Porosity test), and TG-DTA(Thermal analysis).