• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.53-64
• /
• 1990

This study was carried out to develop the traditional korean paper changphanji from the bast fiber of paper mulberry The results obtained were as follows: 1. The variations in the basis weight were remarkable, but there were no significant adverse effects on the tensile strength and thickness. 2. The stamping have contributed to the improvement of smoothness and the control of thickness. The automatic pressing system recommended to obtain good control of thickness. 3. The average density of the traditional korean paper changphanji was 1.06g/$cm^3$. 4. The changphanji developed in this study gave a clude, but excellent toughness and warm feeling. Some fiber lumps, dark spots and bamboo, screen marks were also obserded. 5. The tensile strength of four-fold sheet changphanji is highest and those of two-fold sheet changphanji is lowest. the lengthwise tensile strength was higher than crosswise one due to the fiber. 6. The elongation of three-fold sheet changphanji was highest 7. The water absorption of all products ranged from 11.3g/$m^2$ to 17.5g/$m^2$. 8. The wight loss by abrasion was 34.0%(four-fold sheet) 31.6%(three fold sheet), 31.0% (two-fold sheet)respectively. 9. Based on the results obtained. tensile strength and elongation, the four-fold sheet was excellent. the use of the bast fiber of paper mulberry as a raw material is attractive point which can not obtained from the commercial changphanji made from other raw materials.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.16-24
• /
• 2007

This study was performed to investigate the reaction between alkylketene dimer(AKD) and cellulose molecules in AKD-sized paper sheet. AKD was added to highly beaten($80{\pm}3^{\circ}SR$) SwBKP(ca. 0.8% on pulp) in order to have much AKD retention in the paper sheet. This AKD-sized paper sheet was aged at different temperatures, $60^{\circ}C,\;80^{\circ}C,\;105^{\circ}C\;and\;125^{\circ}C$. Changes in FT-IR spectra of AKD in paper sheet during the ageing were measured. In addition, sizing degrees of the AKD-sized paper sheet pretreated for 30 sec. at $105^{\circ}C$ were measured by HST size tester during the storage at different temperature. IR spectra of AKD-sized paper sheet preheated at $105^{\circ}C$ for 30 sec. showed unchanged spectra two absorption bands at $1849cm^{-1}\;and\;1722cm^{-1}$ which refer to the typical AKD IR bands. However, these typical AKD bands were gradually reduced with increasing ageing, completely disappeared after 6 hrs. and formed new absorption band at $1706cm^{-1}$, which refers to carbonyl stretching vibration of dialkylktone. Eventually the AKD molecule was hydrolyzed to diakylketone without formation of ${\beta}$-ketoester with cellulose in paper sheet. After 6 days ageing, a little amount of ${\beta}$-ketoester bands was identified in 6 or 7 days ageing, because of the absence of water due to long-term heating. The same tendency was observed at different ageing conditions. At the practical papermaking process, AKD reacts prevailing with water, and mostly seems to be hydrolyzed to dialkylketene. Concerned to the sizing development, AKD-sized paper sheet was shown no sizing development at the initial stage of ageing at $60^{\circ}C$ after heating treatment at $105^{\circ}C$ for 30 sec., and gradually increased the sizing degree with increasing ageing, such as Hercules Sizing Tester (HST) 130 see for 12 hr, HST 300 sec. for 3 days and HST 400 sec. for 5 days. It was concluded that hydrolyzed AKD could contributed to the sizing development of the paper sheet.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.49-56
• /
• 2011

Mulching technique is used to control the temperature and moisture content of soil by covering the ground surface. Most kinds of mulching film are made of polyethylene which is non-biodegradable synthetic polymer. Utilizing these films has been one of the main sources in soil pollution. Thus residual films under the ground should be removed after a certain period of time. Therefore, an alternative mulching material made of biodegradable functional paper is considered instead of non-biodegradable films. The mulching sheet produced from paper basis has a functionality to be naturally degraded and then recycled to the bio-materials on soil. In this study, the paper based-mulching sheet coated with biodegradable polymer was specially produced using a laboratory bar coater. Coating colors prepared by dissolving PBS/PLA in chloroform were applied to kraft paper. The mechanical strength and aging properties of this mulching sheet were investigated. The burst strength of polymer-coated paper was decreased with the increase of the PBS ratio in PBS/PLA blends, and, in particular, 30/70 blending condition led to good stability in heat-aging atmosphere for 60 days.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.618-621
• /
• 2006

This paper is to investigate temperature history of cold weather concrete depending on insulation curing sheet kinds. Insulating effect according to curing sheet is shown in order of 5 layer bubble sheet, combination of PE form and 3 layer bubble sheet and 3 layer bubble sheet. It maintained above $10^{\circ}C$ of minimum temperature until the completion of initial curing period when bubble curing sheet was supplied regardless of curing sheet kinds. Five layer bubble curing sheet secure higher curing temperature than any other curing sheet applied in this experiment by as much as $2{\sim}3^{\circ}C$, which performed remarkable insulation effect. Concrete applied with curing sheet secured above $65^{\circ}D{\cdot}D$ of maturity, at which concrete had 5MPa of compressive strength at 3 days.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.74-84
• /
• 1998

This study was carried out to investigate the papermaking characteristics of paper mulberry(Broussonetia kazinoki) for new Korean traditional paper(Hanji). Hanji has been traditionally made only with the bast fiber of paper mulberry. Besides mulberry bast part, wood core was utilized separately or in mixed forms as raw materials for the new Hanji. Hanjis made from the solfomethylated pulp were shown higher brightness and sheet strengths than those from alkali and alkali-hydrogen peroxide pulps. The brightness of solfomethylated pulp was found to be high enough not to need additional bleaching. In the physical properties of the Hanjis mixed with bast part and wood core pulps, the handsheet strengths were decreased as the increase of the wood core pulp contents. But the sheet strengths of Hanjis containing 10∼30% of wood core pulps were higher than those of the Hanji containing bast part pulp only. The sheet formations were improved as the increase of wood core pulp contents, while the sheet strengths were decreased.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1483-1486
• /
• 2004

Purpose of this paper is to accummulate database of automotive steel sheet from mild steel to high strength steel in cold rolled steel sheets. Physical properties, mainly mechanical properties, of steel sheet are tested and all data are arranged to one sheet. Methods of test are composed of FLD, tensile strength test, chemical composition, surface roughness and product conditions. Finally this database will be helpful to automotive body designers and die designers to design automotive body parts and tools in a material point of view.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.93-97
• /
• 1999

Tobacco stalks are greatly produced as annual agricultural wastes. These residues are available approximately 70,000 tons per year. This study was performed to evaluate the potentials of tobacco stalks as a new resource for reconstituent tobacco sheet. Tobacco stalk was more lignified than cereal straws, and had similar chemical constituents to hardwood. Pulping yields by cooling at 170$^{\circ}C$ of dry and green tobacco stalks were 56.7% and 66.3% , respectively. Around 50$^{\circ}$SR freeness level of mixed pulp was adjusted by mixing more than 10% chemical pulp9CP) in the case of dry tobacco stalk and more than 15% CP with wet one. By immersing this handsheet in extracted cooking liquors, reconsitutent sheet contained about 0.28% of nicotines could be prepared. This sheet had enough strength properties for cigarette paper making . In conclusion, it was proved that tobacco stalk could be used to produce the reconstituent tobacco sheet.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.310-315
• /
• 1997

An extensive corrosion study was initiated by galvalume steel sheet manufacturing company to clarify the corrosion behavior of zinc and zinc and zinc-alloy coated automotive sheet steel in out panel and electrical application. Since the early 1980's the use of zinc and aluminum alloy coated steel for vehicular corrosion protection has increased drastically. This paper describes the evaluation of formability, weldability and painted corrosion performance of galvalume steel sheet. This paper presents an overview of the program and some initial test results on the weldability, lifetime of the electrode tip shape of the spot welding and corrosion protection. Galvalume steel sheet improved corrosion performance and spot weldability of galvalume steel has no problem for the variation of welding current. And tip lifetime was changed according to the influence of shape.

• 정보관리학회지
• /
• 제16권4호
• /
• pp.37-52
• /
• 1999

이 논문에서는 인터넷에서 악보를 표현하기 위한 효과적인 기법을 제안한다. 인터넷 악보 표현을 위해 이 논문에서는 XML에 기반한 새로운 마크업 언어인 ScoreML(Score Markup Language)을 제안하고, 이것을 정의하는 XML DTD를 설계하였다. ScoreML을 구성하는 XML DTD는 실제 연주에 사용되는 악보를 인터넷 상에서 검색할 수 있도록 악보의 다양한 부분을 표현하는데 중점을 두어 설계되었다. 이러한 ScoreML을 사용하여 작성한 인터넷 악보는 Java applet으로 구현된 ScoreML 브라우저에 의해 인터넷 상에서 곧바로 보여지게 된다.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.78-84
• /
• 1998

The problem of autobody corrosion has been addressed over the past decade by the increasing use of zinc and zinc alloy coated steels in automotive application. This paper describes the evaluation of formability, weldability and painted corrosion performance of galvalume steel sheet. This paper presents an overview of the program and some initial test results on the weldability, lifetime of the electrode tip shape of the spot welding and corrosion protection. Galvalume steel sheet improved corrosion performance and spot weldability of galvalume steel sheet was not changed under the influence of the variation of welding current. And tip shape has influenced on the lifetime of tip for galvalume steel sheet.