• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.832-837
• /
• 2008

A modeling method for the modal analysis of a multi-packet blade system having tapered cross section undergoing rotational motion is presented in this paper. Blades are idealized as tapered cantilever beams that are fixed to a rotating disc. The stiffness coupling effects between blades due to the flexibilities of the disc and the shroud are modeled with discrete springs. Hybrid deformation variables are employed to derive the equations of motion. To obtain more general information, the equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters including tapered ratio and the number of packets as well as blades on the modal characteristics of the system are investigated with some numerical examples.

• Korean Journal of Materials Research
• /
• v.15 no.9
• /
• pp.560-565
• /
• 2005

The objective of this paper is to decide optimal of the slot angle to minimize stress concentration in rotating disc of diamond saw. The fracture phenomena of the slot are discussed by the theoretical and experimental approaches and then some recommendation are presented to prevent the fracture. The focus of this investigation is to evaluation the effect of the slot on stress distribution using optimum design technique and finite element method(FEM) analysis. Stress concentration of the slot with respect to the various parameter of the slot such position, size, number, rotation speed. From the experimental results, when the slot angle of diamond saw is located $8^{\circ}\~12^{\circ}$ from rotating direction, the maximum equivalent stress reduces.

• Journal of dental hygiene science
• /
• v.2 no.1
• /
• pp.31-38
• /
• 2002

This study was to investigate the antibacterial effect of 63 species herbal medicine extracts on S. mutans growth by paper disc method and then examined the effects of S. mutans growth by some selected herbal medicines. Antibacterial effect of 63 species medicinal herb extracts on S. mutans was superior to Lycopi herba, Scutellariae radix in regular order and antibacterial activity(20 mg/ml concentration) through paper disc method were measured 6.3 mm and 3.5 mm, respectively. The growth of S. mutans in control medium was the highest at 8hrs, while that of medicinal herbs extract added-medium(2 mg/ml) was at 16 hrs. The pH values of the control media and media supplemented with Lycopi herba and Scutellariae radix extract were 5.08, 5.80, and 5.74 at 8 hrs, respectively. In the change of total carbohydrate of the control media and supplemented with Lycopi herba and Scutellariae radix extract were 0.81 mg/ml, 1.70 mg/ml and 1.84 mg/ml at 8 hrs, respectively. In the change of proteins of the control media and supplemented with Lycopi herba and Scutellariae radix extract were 8.39 mg/ml, 9.52 mg/ml and 9.28 mg/ml at 8 hrs, respectively. The polysaccharide contents of the control media and supplemented with Lycopi herba and Scutellariae radix extract were 300 mg/100 ml, 200 mg/100 ml and 220 mg/100 ml at 8hrs, respectively.

• Tribology and Lubricants
• /
• v.14 no.1
• /
• pp.37-44
• /
• 1998

The adequate design of a passenger car's braking system, which is directly related to the safety of a car, is very important since the safety is an essential design parameter of a car to keep men and car from the damage. The general method to verify the performance and safety of a braking system is still based on the trial-error experiments. However, the design based on experiments costs high and is time-consuming method. So it is desirable to use the numerical analysis method for the reduction of cost and time in the design of a braking system. In this paper, the thermal characteristic of a ventilated disc brake has been analyzed as a function of the car speed and a deceleration during quick braking.

• Journal of the Korean Society of Food Culture
• /
• v.16 no.3
• /
• pp.243-249
• /
• 2001

Antibacterial activities in each part of watercress(Oenanthe javanica D.C.) grown under different culture conditions were measured to determine the possibility to use watercress as a resource to develop the antibacterial substance. The leaves of watercress were extracted with methanol and the methanol extract was further fractionated with various organic solvents. Antibacterial activities against Shigella dysenteriae ATCC 9361 in all fractions were determined according to the agar diffusion method using paper disc. Methanol extract of watercress leaves was more effectively inhibited the growth of the tested bacteria than the extracts of roots or stems at the concentration of 0.5 g eq./disc, and the extract of watercress from Hwasoon was the most effective one as compared to others. Phenolic and neutral fractions fractionated from methanol extract of watercress had a considerable inhibiting activity on the growth of the bacteria, but acidic and basic fractions did not show any inhibitory effect. Minimum inhibitory concentrations of phenolic and neutral fractions against Shigella dysenteriae ATCC 9361 were $400\;{\mu}g/disc$ and $550\;{\mu}g/disc$, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.83-88
• /
• 2000

multi-beam optical drive is a method to improve the data transfer rate for the optical disc systems by parallel recording and reading on neighboring multi-tracks. In this paper, the beam rotating actuator, which is necessary for the multi-bean optical disc drive to from beam spots on multi-tracks simultaneously, has been developed. The Voice Coil Motor is used as a drive mechanism for high resolution and small size of the actuator. And rotating guide based on link structure is designed for frictionless and axisless rotation of rotating part including dove prism and for rotating in axis of geometric center of dove prism. The characteristics of the actuator are experimented by laser vibrometer, Polytec OFV1102 and a dynamic analyzer, HP35670A. It shows that the actuator has good linearity, rotating range $\pm0.34^\circ$, minimum rotating angle $0.0066^\circ$and natural frequency 113.9Hz. Therefore the actuator can be applied in a multi-beam optical disc system.

• 연구논문집
• /
• s.28
• /
• pp.229-238
• /
• 1998

Materials and parts required for nondestructive testing should be evaluated using with standard block. And it is ruled that standard blocks should be fabricated from same or similar material with test specimen. In order to manufacture and export materials and parts, quality assurance system should be required. In this paper, ultrasonic characteristics of ASTM 4340 steel ultrasonic standard block are investigated for nondestructive evaluation of udimet 720Li disc. Microstructures of udimet 720Li alloy are investigated using with optical and transmission electron microscope. Also ultrasonic transit time and attenuation are measured from high power ultrasonic analysis system with phase adjustment method. Conclusively, it is proved that 4340 steel ultrasonic standard block can be use for nondestructive evaluation of udimet 720Li disc.

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.215-221
• /
• 2002

In high speed optical disc devices, the vibration caused by unbalanced displacement leads the focus and tracking servo systems to be unstable, and increases the data search time. In this paper, we propose a new scheme to solve the unbalanced displacement problem. The proposed method detects the unbalanced rate by differential amplifying optical power received at photo diode and converts it into an electrical signal. controlling the speed of spindle motor, according to the detected unbalanced rate, makes it possible to improve the performance of tracking and data searching tasks. Also, we analyze the dynamic characteristics of focus and tracking servo systems in high speed mode and provide the firmware and hardware architecture that the proposed method can be installed as an add-on- module in the existing system.

• Journal of Biomedical Engineering Research
• /
• v.2 no.2
• /
• pp.89-102
• /
• 1981

The recirculating flows which occur in the prosthetic heart valve have been known to cause several diseases in the human body. And the recent studies show that the shear stress at the wall of the artery is also very important factor in the formation of thrombus. And many studies knave been devoted in obtaining more information about the blood flow through the prosthetic heart valve. In this Paper, the steady axisymmetric flow through the Disc-Type Heart Valve is studied by using the numerical method. The geometry of the Disc-Type Heart Valve is simplified, and the flow is assumed to be steady axisymmetric flow. The vorticity transport equation derived from the Wavier-Stoke's equation is used as the governing equation, and the explicit finite difference method is used to obtain the steady state solution. The results for several Reynolds numbers show that the recirculating flow becomes large as the Remolds number increases. Furthermore, it can be shown that the magnitudes of the vorticity and the stresses are also increased with the Reynolds number, but there is only a little change in their configurations of distribution and in their positions of maximum values.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.2
• /
• pp.32-41
• /
• 1999

The design method that the structure of double actuators of read-only or read-writable DVD optical pick-up of high density can be compact into the structure of one actuator, is proposed. The designed actuator has the structure of the shaft sliding type in which the moving part can be rotated about the shaft accord to a used optical disc and an objective lens can be switched, and is suspended with magnetic spring. In this actuator, Coulomb's friction is used as damping force and the moving part is designed by finite element method so that the second natural vibration mode can not occur within the servo band. The mock-up of the actuator designed in this paper is made, and its dynamic characteristics is measured and estimated.