• 제목/요약/키워드: panoramic image

검색결과 248건 처리시간 0.027초

디지털 방사선영상 시스템의 기본적 원리 (Physical principles of digital radiographic imaging system)

  • 최진우;이원진
    • Imaging Science in Dentistry
    • /
    • 제40권4호
    • /
    • pp.155-158
    • /
    • 2010
  • Digital radiographic systems allow the implementation of a fully digital picture archiving and communication system (PACS), and provide the greater dynamic range of digital detectors with possible reduction of X-ray exposure to the patient. This article reviewed the basic physical principles of digital radiographic imaging system in dental clinics generally. Digital radiography can be divided into computed radiography (CR) and direct radiography (DR). CR systems acquire digital images using phosphor storage plates (PSP) with a separate image readout process. On the other hand, DR systems convert X-rays into electrical charges by means of a direct readout process. DR systems can be further divided into direct and indirect conversion systems depending on the type of X-ray conversion. While a direct conversion requires a photoconductor that converts X-ray photons into electrical charges directly, in an indirect conversion, lightsensitive sensors such as CCD or a flat-panel detector convert visible light, proportional to the incident X-ray energy by a scintillator, into electrical charges. Indirect conversion sensors using CCD or CMOS without lens-coupling are used in intraoral radiography. CR system using PSP is mainly used in extraoral radiographic system and a linear array CCD or CR sensors, in panoramic system. Currently, the digital radiographic system is an important subject in the dental field. Most studies reported that no significant difference in diagnostic performance was found between the digital and conventional systems. To accept advances in technology and utilize benefits provided by the systems, the continuous feedback between doctors and manufacturers is essential.

Factors affecting maxillary sinus pneumatization following posterior maxillary tooth extraction

  • Lim, Hyun-Chang;Kim, Sangyup;Kim, Do-Hyup;Herr, Yeek;Chung, Jong-Hyuk;Shin, Seung-Il
    • Journal of Periodontal and Implant Science
    • /
    • 제51권4호
    • /
    • pp.285-295
    • /
    • 2021
  • Purpose: The aims of the present study were 1) to quantitatively evaluate the extent of sinus pneumatization and 2) to determine the factors affecting sinus pneumatization. Methods: Based on implant treatment records, a list of patients who underwent implant placement on the posterior maxilla was obtained. Among them, patients with pre-extraction and post-extraction (before implant placement) panoramic radiographs were selected. After excluding radiographs with low resolution and image distortion, the radiographs before and after extraction were superimposed using computer software. Subsequently, the extent of sinus pneumatization (the vertical change of the sinus floor) was measured. Simple and multiple mixed models were used to determine the factors affecting sinus pneumatization. Results: A total of 145 patients were eligible for the present investigation. The average extent of sinus pneumatization was 1.56±3.93 mm at 176 tooth sites. Male sex, single tooth extraction, extraction of an endodontically compromised tooth, a class I root-sinus relationship, and sinus membrane thickening >10 mm favored pneumatization, but without statistical significance. The maxillary second molar presented the greatest pneumatization (2.25±4.39 mm) compared with other tooth types. This finding was confirmed in the multiple mixed model, which demonstrated a statistically significant impact of the extraction of a second molar compared with the extraction of a first premolar. Conclusions: Maxillary sinus pneumatization was 1.56±3.93 mm on average. The extraction of a second molar led to the greatest extent of pneumatization, which should be considered in the treatment plan for this tooth site.

증강현실 가상 휴먼 기반 원격지 가이드 상호작용 기술 개발 (Augmented reality based virtual humans for remote guide)

  • 이대성;최서현;조동식
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2022년도 춘계학술대회
    • /
    • pp.569-570
    • /
    • 2022
  • 산업체에서 고장 상황이 빈번히 일어나고 이를 위한 기존의 2D 기반 기반의 매뉴얼은 이해가 직관적이지 않고, 유지보수 전문가와 즉각적인 상호작용이 어렵다. 본 논문에서는 원격지에 고장 상황이 발생하였을 때 증강현실을 기반으로 작업자들이 시간과 장소에 제약 없이 실시간으로 전문가의 도움을 받아 유지보수 할 수 있는 기술을 제안한다. 로컬의 가상휴먼 기반 전문가는 HMD 헤드셋을 착용한 상태로 원격지 고장 상황의 적응화 된 파노라마 영상을 기반으로 고장 상황을 진단하고, 원격지의 작업자에게 지시를 내린다. 또한 원격지의 증강현실(AR) 환경에서는 작업자와 전문가의 상호작용을 위해 HMD의 마이크를 이용하여 언어적 소통뿐만 아니라 전문가의 손을 가상으로 생성하고, 가상 손을 사용하여 전문가는 실제 개체에 레이저 포인터를 이용하여 가르키거나, 그림을 그릴 수 있다. 본 기술을 이용한다면 기존의 2D 기반의 매뉴얼의 한계를 극복할 수 있으며 원격지에 전문가가 직접 방문하지 않더라고 원격에서 유지보수를 원활하게 진행하는데 도움을 제공할 수 있다.

  • PDF

효율적인 호모그래피 추정을 통한 파노라마 영상 생성 (Efficient Homography Estimation for Panoramic Image Generation)

  • 서상원;정수웅;한윤상;최종수;이상근
    • 전자공학회논문지
    • /
    • 제50권8호
    • /
    • pp.215-224
    • /
    • 2013
  • 본 논문에서는 고해상도 영상에서 호모그래피를 효율적으로 추정하는 방법을 제안하였다. 호모그래피를 정확하게 추정하는 것은 영상 정합 기술에서 가장 중요한 부분이다. 하드웨어의 급속한 발전으로 고해상도 영상을 쉽게 취득 할 수 있게 되었지만, 데이터의 크기가 증가함에 따라 정확한 일치관계를 추정하는데 많은 계산량이 요구되었다. 또한, 고해상도의 영상에서 확률적으로 부정확한 호모그래피가 추정되는 문제가 발생하였다. 따라서 우리는 원 영상을 각 스케일별로 다운 샘플링한 다수의 영상을 생성하여 각 다운 샘플링된 영상에 해당하는 호모그래피를 추정한 후 투영 오차가 가장 작은 것을 선택하여 원 영상에 적용할 수 있게 보정할 수 있는 방법을 제안하였다. 또한, 영상을 정합하는 과정에서 기준 영상과 대상 영상의 색상 톤의 차이가 큰 경우에는 중첩영역의 지역 정보만을 이용하여 기준 영상과 대상 영상의 색상 톤을 일치시키는 방법을 제안하였다. 실험 결과 기존의 방법보다 3.2M 픽셀의 해상도 영상에서 약 3배, 8M 픽셀의 해상도 영상에서 약 5배 이상 빠른 결과를 얻을 수 있음을 확인하였다. 이는 입력 영상의 해상도가 커질수록 제안한 방법의 효과가 더 커진다는 것을 보여준다.

국내 치과방사선의 현황 및 이용 실태 (The Actual State and the Utilization for Dental Radiography in Korea)

  • 신귀순;김유현;이보람;김세영;이귀원;박창서;박혁;장계용
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제33권2호
    • /
    • pp.109-120
    • /
    • 2010
  • 치과 X선 검사 시 환자선량의 권고량 가이드라인을 개발하기 위해서 우선 국내 치과방사 선의 현황 및 이용 실태를 설문조사하여 비교분석하였다. 응답을 받은 77곳의 치과병 의원 중에서 치과대학이 있는 치과대학병원을 A그룹(11곳), 치과대학이 없는 대학병원을 포함한 치과병원을 B그룹(30곳), 치과의원을 C그룹(36곳)으로 분류하였다. 그룹별로 분석한 결과는 다음과 같았다. 치과병 의원 한 곳당 평균 unit chairs수는 A그룹 140.2개, B그룹 15.3개, C그룹 5.8개, 평균치과의사수는 A그룹 112.6명, B그룹 7.3명, C그룹 1.7명, 평균방사선사수는 A그룹 3.1명, B그룹 0.5명, C그룹에는 한 명도 없었고, 평균치과위생사수는 A그룹 19.7명, B그룹 12.5명, C그룹 3.3명이었다. 설치된 치과용 X선장치의 평균보유수는 A그룹 14.64대, B그룹 3.21대, C그룹 2.19대로 나타났다. 이 중에서 구내촬영장치가 가장 많았고, 다음은 파노라마 장치, 세팔로 장치, CBCT 장치 순이었으며, 장치시스템의 비율은 세 그룹 모두 DR 시스템이 50% 이상으로 가장 많았다. 필름 시스템인 경우, 사용된 구내필름은 감광도가 높은 Insight 필름(Kodak, USA)이 대부분이었으며, 자동 현상기는 사용하는 곳이 적었으나, 필름유지기구는 사용하는 곳이 약간 많았다. PACS 이용률은 A그룹 90.9%, B그룹 83.3%, C그룹 16.7%이었고, 프로그램은 국내의 Infinitt에서 개발된 PiView STAR가 가장 많이 이용되고 있었다. 치과병 의원 한 곳당 2008년도의 연간 평균촬영건수는 A그룹이 B그룹보다 6.8배, C그룹보다 21.2배 더 많았으며, 구내 치근단 촬영과 파노라마 촬영이 대부분이었다. 구내 치근단 촬영 시 관전압과 관전류는 세 그룹 모두 비슷하였으나, 노출시간은 C그룹이 A그룹의 12배, B 그룹의 3.5배 정도 길었다. 즉, 대부분 치과위생사가 촬영하고 있는 C그룹에서는 방사선 노출량이 다른 그룹에 비해 훨씬 많았다. 그러나 파노라마촬영 시의 조건은 세 그룹에서 큰 차이가 없었다. 결론적으로, 촬영조건은 경험적 지식을 따르기보다는 권장량을 사용해야 하며, 필름시스템에서는 자동현상기와 필름유지기구를 사용하여 방사선의 노출량을 줄여준다. 또한 환자선량의 감소와 X선 영상의 질 향상을위해서 X선발생장치 및 관련기기의 체계적인 정도관리가 반드시 필요하다.

악골결손부에 PRP적용후 획득된 골의 변화량 (AUGMENTED BONY CHANGE FOLLOWING PLATELET RICH PLASMA(PRP) APPLICATION ON MAXILLARY DEFECT)

  • 김욱규;김용덕;변준호;신상훈;정인교
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제29권4호
    • /
    • pp.219-225
    • /
    • 2003
  • Purpose: Platelet Rich Plasma(PRP) application is increasing with sinus inlay bone graft, but there is few research with radiographic ananlysis on effect of PRP in maxillary sinus. The author investigated the amount of bony changes of maxillary sinus for dental implantation among the patients with maxillary inlay graft. Materials and Methods: With 10 patients who were treated with sinus inlay autologous bone grafting combined with PRP technique, and with 5 patients who were treated with sinus inlay grafting only without PRP, the panoramic radiographys which were taken at preoperation, immediate postoperation, 3months postoperation, and 4 months postoperation(a month after dental implantation)periods were analysed. The films had been scanned, and then proceeded throughout image analysis system. The bone density of maxillary grafted sites was compared with adjacent tooth enamel density and remeasured according to density luminosity of each film. The density changes on PRP group and bone graft only group were analysed with non-parameteric statistics method. Results: In PRP combined patients group, bone density on postoperation periods was increased totally. The remarkable enhanced change of bone density was observed on 3 months postoperation period, thereafter the increasing rate was slightly reduced. In only bone graft patients group, bone density on postoperation periods was also increased compared with preoperation period, but the bone density of 4 months postoperation period was decreased compared with 3 months postoperation period. The amount of bone density on PRP group was significantly changed according to periods in contrast to bone graft only group. Conclusion: The bone density on PRP group was remarkably increased at 3 months postoperation compared to bone graft only group and it was seemed to be associated with more new bone formation, less grafted bone resorption at bone grafted sites with PRP.

LED 조명계를 결합한 캡슐내시경용 초소형 반사굴절식 전방위 광학계의 설계 (Optical Design of a Subminiature Catadioptric Omnidirectional Optical System with an LED Illumination System for a Capsule Endoscope)

  • 문태성;조재흥
    • 한국광학회지
    • /
    • 제32권2호
    • /
    • pp.68-78
    • /
    • 2021
  • 측면 360° 조명을 위한 6개의 LED (light emitting diode)로 구성된 조명계가 부착된 캡슐내시경용 초소형 반사굴절식 전방위 광학계를 설계하고 성능을 평가하였다. 이 광학계의 총 길이, 전장길이, 반화각(HFOV: half field of view), F-수는 각각 14.3 mm, 8.93 mm, 51°~120°, 3.5로 설계되었다. 이 전방위 광학계는 0.1 megapixels의 CMOS (complementary metal-oxide-semiconductor) 센서를 사용하였으며, LED 조명계는 한 개당 0.25 lm의 LED 6개를 사용하여 광축을 따라 놓여 있는 내장의 내벽을 조명하도록 하였다. 이 결과, 최적화 설계된 광학계의 변조전달함수 0.3에서의 공간주파수, 나이퀴스트 주파수인 44 lp/mm와 0.3의 변조전달함수에서 공차에 따른 누적확률, 초점심도는 각각 130 lp/mm, 95%, -0.097 mm~+0.076 mm이다. 또한 광학계의 시야각 범위 내에서 LED 조명계에 의한 광축으로부터 물체거리가 15 mm인 내장의 내벽에서의 시뮬레이션된 조도는 최소 315 lx~최대 725 lx로 내장의 내벽을 촬영할 수 있는 조도와 가시도임을 알 수 있다.

가상현실(VR)기법을 이용한 조경설계 구현방법 - 주택정원 설계 중심으로 - (Realization Method for Landscape Architecture Design Using Virtual Reality Technology - Focused on the Residential Garden Design -)

  • 덩베이지아;김영훈;차오린썬;허상현
    • 한국조경학회지
    • /
    • 제47권3호
    • /
    • pp.71-80
    • /
    • 2019
  • 지능화와 정보화를 핵심으로 하는 4차 산업혁명이 2016년에 열렸다. 본 연구는 4차 산업혁명시대에 가장 주목받고 있는 가상현실(Virtual Reality: VR) 기술을 이용해서 조경설계 구현에 적용하는 접근 용이성이 강한 버츄얼 워크스루 방법을 제시하는 목적으로 시행되었다. 현재 가상현실 기술은 게임, 비상훈련 및 건축설계 등 많은 영역에서 활용되어 있지만, 조경분야에서는 초기단계에 처하고 있으며, 발전 전망이 밝다. 조경관련분야에서 대부분 전통적인 2차원 도면과 동적인 동영상을 통해 조경설계를 구현하는 방법을 사용하며, 또한 게임 제작 엔진으로 가상현실 구현하는 방식을 사용하고 있으나, 여러 한계점이 존재한다. 따라서 본 연구는 설계-구현-체험 단계로 진행하였으며, 전통적인 조경설계 구현방법을 보완시키는 버츄얼 워크스루 구현방법을 제시하고자 한다. 결과적으로 버츄얼 워크스루 방법은 전통적인 방법에 비해 체험 자유성, 각도 다양성, 정보 제공 및 상호작용 등이 우수한 것으로 나타났다. 또한 높은 품질 및 효과 표현이 가능함으로 조경분야에 적용성이 강한 것으로 볼 수 있다. 향후 조경설계 평가 및 검토 관련 연구의 평가방법을 제공하며, 가상현실 조경분야에서 간편하고 활용성이 있는 구현방법으로 기대효과를 가진다. 가상현실 기법은 조경학계의 지속적인 성장을 기여할 수 있으며, 무한한 전망을 가지고 있다.