• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1688-1691
• /
• 2007

This paper shows that the boundary image sticking can be prohibited completely by using the vacuum sealing process, which means that the residual impurities such as nitrogen or oxygen can be a critical factor inducing the boundary image sticking. The production of boundary image sticking was checked in the test panel fabricated by the $N_2$ or $O_2$ flow during the vacuum sealing process. As a result, the boundary image sticking did not appear in the case of $N_2flow$, whereas the boundary image sticking was observed in the case of $O_2$ flow even though the test panel was fabricated by the vacuum sealing process.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1234-1237
• /
• 2002

When measuring sound transmission loss (STL) in a laboratory, the specimen location in test aperture affects considerably the measuring accuracy through the influence of so-called “tunneling effect” In this paper, for a single panel and a double panel with air cavity, experimental STL evaluations on various specimen locations on test aperture were carried out to explain the phenomenon. It is shown that the difference of STL is more than 2dB especially at the low frequency region and the case of the center-located panel yielded the lower STL than that of flushing with the end of tunnel, which confirms that the tunneling effect plays an important role in STL measurement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1596-1599
• /
• 2009

Mobile ODF (one drop filling) portable display such as mobile phone and application product is needed high reliability than notebook, monitor and TV. Therefore, material development in order to optimize mobile & application ODF panel is needed. Through considering mobile ODF process and design, we have developed method of material matching test by several tests which is heat stress, UV stress and ODF process condition. So we have developed a material with characteristics of high reliability for mobile ODF panel.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.75-78
• /
• 2000

This study investigates the effect of surface treatment on the shear strength between aluminum panel and composite plate. The aluminum panel was surface-treated by DC Plasma and the composite Plate was surface-treated by ion beam. Lap shear test and T-peel test were performed to determine the shear strength and T-peel strength. Results showed that the shear strength of surface-treated case was 2.5 times higher than that of untreated case. The T-peel strength of treated case was more than 5 times higher than that of untreated case. SEM examination showed that the strength increase of surface-treated case was due to the more spread of epoxy to the panel.

• 한국소음진동공학회논문집
• /
• 제20권7호
• /
• pp.644-650
• /
• 2010

Among various elements to affect customer's evaluation of vehicle quality, BSR(Buzz, Squeak, Rattle) are considered to be a mostly contributing factor. In this paper, we provide the test method which can be used to reduce the BSR noise of instrument panel in a vehicle. First, potential source regions of the instrument panel for BSR are localized by using the vibration-excitor and near-acoustic field visualization system. Then, subjective evaluation of BSR noise from the detected potential noise source regions is made with the Zwicker's loudness and time-varying loudness methods. This illustrative analysis reveals that current experimental methods can be used as a test procedure to systematically tackle BSR issues in early stage of the vehicle development cycle, which can result in the reduction of the production cost.

• Wind and Structures
• /
• 제4권6호
• /
• pp.481-494
• /
• 2001

Wind tunnel pressure tests were conducted on a 1:100 scale model of a large industrial building with solar panels mounted parallel to the flat roof. The model form was chosen to have the same aspect ratio as the Texas Tech University test building. Pressures were simultaneously measured on the roof, and on the topside and underside of the solar panel, the latter two combining to produce a nett panel pressure. For the configurations tested, varying both the lateral spacing between the panels and the height of the panels above the roof surface had little influence on the measured pressures, except at the leading edge. The orientation of the panels with respect to the wind flow and the proximity of the panels to the leading edge had a greater effect on the measured pressure distributions. The pressure coefficients are compared against the results for the roof with no panels attached. The model results with no panels attached agreed well with full-scale results from the Texas Tech test building.

• 대한금속재료학회지
• /
• 제46권2호
• /
• pp.97-104
• /
• 2008

Black interlayer was introduced into between ITO and Bus electrodes to enhance a bright room contrast ratio of a plasma display panel. To measure the electrical resistance of the black interlayer, we designed two test patterns, type I and type II, of which type II pattern was successful. Using type II test pattern, the electrical resistance of the black interlayer was measured to be $300{\Omega}$ for $2{\mu}m$ thickness case and infinitely high for 4, $6{\mu}m$ thickness. This result shows that electrical resistance of the black interlayer in the ITO/black interlayer/Bus electrodes structure is a critical parameter which determines the electrical characteristics of the PDP.

• 통상정보연구
• /
• 제17권1호
• /
• pp.217-240
• /
• 2015

본 논문은 28개 국가에 제공한 공적개발원조(ODA)와 원조 수원국의 무역개방이 우리나라 수출에 미친 영향에 중점을 두고 분석하였다. 본 연구는 2005~2012년 기간의 패널자료를 가지고 원조 수원국의 경제규모(1인당 GDP), 무역개방(trade openness), 인구수, 원조 공여국의 공적개발원조(ODA) 규모, 원조 공여국과 수원국간의 거리(distance) 등의 변수를 포함하여 모형을 구축하였다. 또한 원조 수원국을 아시아, 아프리카, 아메리카 등 3개 지역으로 구분하여 이들 지역에 제공한 원조가 우리나라 수출에 미친 영향도 분석하였다. 모형의 적합성을 판단하기 위해 패널 단위근과 패널 공적분 검정을 실시하였으며, 이를 토대로 panel OLS, panel GLM, panel EGLS 등의 추정방법을 이용하였다. 분석결과에 따르면, 원조 수원국의 경제규모, 인구수, 무역개방과 우리나라의 공적개발원조(ODA)는 우리나라 수출 증가에 긍정적이며 통계적으로도 유의한 영향을 준 것으로 나타났다. 반면에 거리변수는 수출증가에 부정적이며 통계적으로도 유의한 영향을 준 것으로 나타났다. 더미변수를 이용한 경우, 아프리카와 아메리카 지역에 대한 원조는 각각 5%와 10% 유의수준에서 우리나라 수출증가에 부정적인 영향을 준 것으로 나타났다. 따라서 아프리카에 대한 원조 규모가 최근에 증가하는 추세를 고려할 때 이 지역에 대한 원조가 우리나라 수출을 증진시킬 수 있는 방안들을 우선적으로 모색해야 한다. 또한 아프리카와 아메리카 지역에 대한 원조가 우리나라 수출시장의 확대보다는 자원의 확보와 개발에 중점을 두었는지에 대한 향후 연구도 필요하다.

• 한국컴퓨터정보학회논문지
• /
• 제12권4호
• /
• pp.249-256
• /
• 2007

본 논문에서는 휴대 가능한 중소형($4{\sim}9$인치 크기)의 정보단말기에 사용되는 TFT-LCD(Thin Film Transistor addressed -Liquid Crystal Display)의 LDI(LCD Driver Interface) 제어기(controller)를 제조사와 크기에 관계없이 사용할 수 있는 표준화된 범용 TFT-LCD의 LDI를 설계하고 FPGA(Field Programmable Gate Array)로 구현하였다. 설계한 LDI 제어기는 FPGA 테스트 보드(test board)에서 검증하였으며, 상업용 TFT-LCD 패널에서 시험결과 안정적으로 상호 동작하였다. 설계한 범용 LDI 제어기의 장점은 LCD의 제조사와 크기에 관계없이 그 동작을 표준화시켜 설계하였으므로 향후 모든 패널내의 SoG(System on a Glass) 모듈 설계에 적용할 수 있는 것이다. 그리고 기존의 방식에서는 LCD 제조사별, 패널 크기별로 별개의 LDI 제어기 칩을 개발하여 사용하지만, 설계한 LDI 제어기는 모든 휴대 가능한 중소형 패널을 구동시킬 수 있어서 IC의 공급가, AV 보드와 패널의 제조 원가 하락을 가져올 수 있으며 가까운 장래에는 보다 우수한 기능의 패널을 제작하기 위한 TFT-LCD 패널 모듈의 SoG 개발이 필연적으로 요구되고 있다. 연구결과는 TFT-LCD 패널을 더욱 소형화, 경량화 그리고 저가격화가 가능하여 기술 및 시장 경쟁력을 선점할 수 있다. 또한 향후 많은 수요가 예상되는 이동형 정보단말기에 사용되는 TFT-LCD 패널 모듈의 SoG IC(Integrated Circuit) 개발과 제작을 위한 기초 자료로서 활용될 수 있다.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.76-81
• /
• 2000

Analysis on failure of the panel glass under mechanical shock is the main topic of this study. Since the glass for the LCD panel is thin, it needs to be designed to have enough toughness against mechanical shock. In this paper, a process of estimating fracture of the panel glass is proposed to guarantee reliability of the product. The fracture toughness of the panel glass is used as a criterion of the fracture based on an experimental approach. The stress intensity factor was calculated considering a model with the largest initial crack size on a cut surface and with the boundary force obtained from a dynamic finite element analysis. Critical surface roughness on the cut surface of a typical glass panel, to prevent fracture in case of bending mode, is obtained.