• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.210-213
• /
• 2002

The blue phosphor, $BaMgAl_{10}O_{17}$:$Eu^{2+}$, showing a blue emission band at about 450 nm were prepared by solid state reaction of BaC $O_3$, A $l_2$ $O_3$, MgO and E $u_2$ $O_3$ with Al $F_3$ as a flux. The thermal quenching of BaMgAl $O_{17}$:E $u^{2+}$ phosphor significantly reduces the intensity of the blue emission. It is reduced by an amount of 50% after heating at around 800$^{\circ}C$ for 1 hr. The red emission in the 580∼720 nm region of $^{5}$ $D_{0}$\longrightarro $w^{7}$ $F_1$ and $^{5}$ $D_{0}$\longrightarro $w^{7}$ $F_2$ transition of $Eu^{3+}$ is produced from the phosphor heated above 1,100$^{\circ}C$. The EPR spectrum also reveals that some part of E $u^{2+}$ ions are oxidized to trivalent ions above 1,100$^{\circ}C$ at around 90 and 140mT. This oxidation evidence is also detected from XANES absorption spectra for $L_{III}$ shell of Eu ions: an absorption peak is at 6,977eV of E $u^{2+}$ and 6,984eV of $Eu^{3+}$. The combined X-ray and neutron data suggests that the new phase of EuMgA $l_{11}$ $O_{19}$ magnetoplumbite structure may be formed by heat treatment.eat treatment.tment.eat treatment.tment.t.

• 대한토목학회논문집
• /
• 제32권6A호
• /
• pp.337-345
• /
• 2012

본 연구에서는 4대강 사업으로 건설중인 트러스형 리프트의 진동특성을 검토하기 위하여 모형실험이 수행된다. 경간 40 m, 높이 9 m의 트러스형 리프트게이트를 축척 1/25로 모형이론에 따라 아크릴과 납으로 모형을 제작하고, 폭 1.6 m, 길이 25 m, 높이 0.8 m의 수로에서 실험된다. 먼저 모형의 고유진동수가 측정되고 모형을 검증하기 위하여 유한요소 해석결과와 비교된다. 검증된 모형에서 상하류 수위와 문비 개방고에 따른 진동가속도 진폭이 측정된다. 또한 문비의 진동을 줄 일수 있는 하부형상을 검토하기 위하여 문비 최하부의 각도가 $20^{\circ}$, $35^{\circ}$, $50^{\circ}$인 모형을 제작하고 실험결과를 서로 비교한다. 실험 결과는 수문 조작 시 유지관리지침의 기본 자료를 제공하고, 수문의 진동특성과 진동을 줄일 수 있는 수문의 하부형상을 검토한다.

• 비파괴검사학회지
• /
• 제27권1호
• /
• pp.38-47
• /
• 2007

항공기 구조를 모사하여 일련의 리벳구멍을 갖는 AA2024-T3 박판 구조를 대상으로 음향방출(AE)을 이용하여 피로균열을 탐지하고, 표면초음파(SAW)를 이용하여 균열길이를 측정하였다. 누적 AE 발생수 곡선은 단균열(short crack)의 발생과 성장에 따라 일정한 간격을 두고 급격히 증가하는 계단식 형태로 나타났으나 피로균열의 성장은 지수함수적인 증가를 보였다. SAW를 이용한 균열길이 측정은 균열길이가 다른 13개의 균열에 대하여 실시하였고, 측정된 데이터를 이동식 현미경으로 측정한 결과와 비교하였다. 그 결과 1 mm 이하의 단균열의 크기를 표면초음파 방법으로 측정하는 것은 거의 불가능하였으나, 1 mm 이상의 균열에서는 비교적 높은 신뢰도로 균열길이 측정이 가능함을 확인함으로써 실용적인 측면에서 이 방법이 유효하게 사용될 수 있는 영역이 존재함을 알 수 있었다.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.290-299
• /
• 2016

The most powerful energy resource in nature is solar energy which becomes directly converted to electric power in worldwide. Most of the photovoltaic power plants are commonly installed on sunny side of the ground. Thus the installation of photovoltaic power plant could produce an unexpected adverse effect by sacrificing the productivity from green field or forest. To avoid these adverse effect floating photovoltaic plant has been devised and installed on inland reservoir. The photovoltaic plant could utilize ignored water surface without sacrificing the productivity of the ground. Additionally the photovoltaic efficiency has been reenforced by the cooling effect induced by the circulating air flow from water surface. The floating photovoltaic plant could be furnished solar tracking ability by tilting the system operated with the aid of the ballast system. This report is provided to introduce the design of the floating structure with solar panel which furnished solar tracking ability with the aid of ballast system.

• 산업경영시스템학회지
• /
• 제39권1호
• /
• pp.91-97
• /
• 2016

This study is concerned about the process capability index in single process. Previous process capability indices have been developed for the consistency with the nonconforming rate due to the process target value and skewness. These indices calculate the process capability by measuring one spot in an item. But the only one datum in an item reduces the representativeness of the item. In addition to the lack of representativeness, there are many cases that the uniformity of the item such as flatness of panel is absolutely important. In these cases, we have to measure several spots in an item. Also the nonconforming judgment to an item is mainly due to the range not due to the standard variation or the shift from the specifications. To imply the uniformity concept to the process capability index, we should consider only the variation in an item. It is the within subgroup variation. When the universe is composed of several subgroups, the sample standard deviation is the sum of the within subgroup variation and the between subgroup variation. So the range R which represents only the within subgroup variation is the much better measure than that of the sample standard deviation. In general, a subgroup contains a couple of individual items. But in our cases, a subgroup is an item and R is the difference between the maximum and the minimum among the measured data in an item. Even though our object is a single process index, causing by the subgroups, its analytic structure looks like a system process capability index. In this paper we propose a new process capability index considering the representativeness and uniformity.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.31-31
• /
• 2017

Understanding the mechanism(s) to overcome or prevent seed ageing deterioration during storage is of fundamental interest to seed physiologists. Vitamin E (tocols) is known as a key metabolite to efficiently scavenge lipid peroxy radicals which cause membrane breakdown resulting in seed ageing. However, in rice research this hypothesis has been tested for very few lines only without considering intraspecific variation in genomic structure. Here, we present a correlation study between tocols and seed longevity using a diverse rice panel. Seeds of 20 rice accessions held in the International Rice Genebank at the International Rice Research Institute, representing aus, indica, temperate japonica and tropical japonica subpopulations, were used for tocols analysis (quantification of ${\alpha}$-, ${\beta}$-, ${\gamma}$-, ${\delta}$-tocopherol/tocotrienol by ultra performance liquid chromatography) and storage experiments at $45^{\circ}C$ and 10.9% seed moisture content (sample taken for germination testing every 3 days up to 60 days). To examine interactions between DNA sequences and phenotype, the 700k high-density single-nucleotide polymorphism marker data-set was utilized. Both seed longevity (time for viability to fall to 50%; $p_{50}$) and tocols content varied across subpopulations due to heterogeneity in the genetic architecture. Among eight types of tocol homologues, ${\alpha}$-tocopherol and ${\gamma}$-tocotrienol were significantly correlated with $p_{50}$ (negatively and positively, respectively). While temperate japonica varieties were most abundant in ${\alpha}$-tocopherol, indica varieties recorded 1.3 to 1.7-fold higher ${\gamma}$-tocotrienol than those of other subpopulations. It was highlighted that specific ratio of tocol homologues rather than total tocols content plays an important role in the seed longevity mechanism.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.170-176
• /
• 2014

Effective glass frit compositions enabled to absorb laser energy, and to seal a commercial dye-sensitized solar-cell-panel substrate were developed by using $V_2O_5$-based glasses with various amounts of $TeO_2$ substitution. The latter was intended to increase the lifetime of the solar cells. Substitution of $V_2O_5$ by $TeO_2$ provided a strong network structure for the glasses via the formation of tetrahedral pyramids in the glass, and changed the various glass properties, such as glass transition temperature ($T_g$), dilatometric softening point ($T_d$), crystallization temperature, coefficient of thermal expansion (CTE), and glass flowage without any detrimental effect on the laser absorption property of the glasses. The thermal expansion mismatch (${\Delta}{\alpha}$) between the glass frit and the substrate could be controlled within less than ${\pm}5%$ by addition of 10 wt% of ${\beta}$-eucryptite. An 810 nm diode laser was used for the sealing test. The laser sealing test revealed that the VZBT20 glass frit with 10 wt% ${\beta}$-eucryptite was successfully sealed the substrates without interfacial cracks and pores. The optimum sealing conditions were provided by a beam size of 3 mm, laser power of 40 watt, scan speed of 300 mm/s, and 200 irradiation cycles.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권8호
• /
• pp.1063-1072
• /
• 2012

Effective population size ($N_e$) is an important measure to understand population structure and genetic variability in animal species. The objective of this study was to estimate $N_e$ in Sapsaree dogs using the information of rate of inbreeding and genomic data that were obtained from pedigree and the Illumina CanineSNP20 (20K) and CanineHD (170K) beadchips, respectively. Three SNP panels, i.e. Sap134 (20K), Sap60 (170K), and Sap183 (the combined panel from the 20K and 170K), were used to genotype 134, 60, and 183 animal samples, respectively. The $N_e$ estimates based on inbreeding rate ranged from 16 to 51 about five to 13 generations ago. With the use of SNP genotypes, two methods were applied for $N_e$ estimation, i.e. pair-wise $r^2$ values using a simple expectation of distance and $r^2$ values under a non-linear regression with respective distances assuming a finite population size. The average pair-wise $N_e$ estimates across generations using the pairs of SNPs that were located within 5 Mb in the Sap134, Sap60, and Sap183 panels, were 1,486, 1,025 and 1,293, respectively. Under the non-linear regression method, the average $N_e$ estimates were 1,601, 528, and 1,129 for the respective panels. Also, the point estimates of past $N_e$ at 5, 20, and 50 generations ago ranged between 64 to 75, 245 to 286, and 573 to 646, respectively, indicating a significant $N_e$ reduction in the last several generations. These results suggest a strong necessity for minimizing inbreeding through the application of genomic selection or other breeding strategies to increase $N_e$, so as to maintain genetic variation and to avoid future bottlenecks in the Sapsaree population.

• 생물정신의학
• /
• 제23권4호
• /
• pp.157-165
• /
• 2016

Objectives There were previous studies which indicated that attitude toward suicide is able to influence the suicide outcome in both individual and group levels. In regard to the highest suicide rate in Korea, our study aims to explore the influence that attitude toward suicide has on suicide by comparing the national attitude towards suicide with a representative sample of the general population. Methods The target population was 20- to 59-year-old adults from South Korea, Japan, and the United States. The panel data were divided according to gender, age, and residential area of individuals, and an email with a hyperlink to our web survey was sent to the randomly selected participants in each stratum. To measure the perceptual differences about suicide in different cultures, this study adopted the Attitudes Toward Suicide questionnaire. Results A total of 2247 subjects in three countries participated in this study. According to results from factor analysis, there were different structure of factors and included items within factors in the three countries : five factors with nineteen items in South Korea, five factors with nineteen items in the United States, and five factors with twenty-five items in Japan. With regard to permissive attitude toward suicide, the mean value of permissiveness was not significantly different among countries, but permissiveness according to education level, gender, and marital status was different in each country. Conclusions This study is the first nationwide comparative study about attitude toward suicide with a representative sample. Our findings suggest that permissive attitude toward suicide influence the suicide phenomenon in each country ; however, its impact is not a mean score of permissiveness, but the detailed difference by various demographics.

• 대한기계학회논문집A
• /
• 제37권9호
• /
• pp.1099-1107
• /
• 2013

본 연구에서는 알루미늄 압출재로 구성된 한국형 표준전동차모델(K-EMU)의 차체를 대상으로 치수 최적설계와 구조체 소재 변경을 통한 경량화방안에 대해 연구하였다. 우선 K-EMU 차체의 하부구조, 측벽구조, 단부구조의 부재별 두께를 현재의 압출가능 두께를 적용하여 치수 최적화 기법으로 약 14.8% 경량화 하였다. 그리고 치수최적설계 된 K-EMU 차체에 유지보수성이 좋은 고장력강(SMA570)재질의 프레임타입 하부구조를 적용하여 초기 K-EMU 차체대비 약 3.8% 경량화 된 하이브리드 차체를 도출하였다. 마지막으로 샌드위치 복합재를 하부구조와 지붕구조에 적용하여 초기 K-EMU 차체대비 약 30% 경량화 된 초경량 하이브리드 차체를 도출하였다. 도출된 차체 모델들은 모두 전동차 구조체 하중시험법을 만족하였다.