• Journal of the Korea Computer Graphics Society
• /
• v.26 no.2
• /
• pp.1-9
• /
• 2020

In this paper, we propose haptic interfaces based on force feedback to provide a physical painting experience to virtual reality users. Through this system, the user can create surface-based painting holding a haptic stylus, while utilizing both visual feedback from the worn HMD and haptic feedback during painting. In particular, the haptic interfaces simulate the physical interaction between painting brush and painting, which can help to improve the spatial perception of users and compensate for visual feedback. This can reduce laborious drawing works to repeatedly paint strokes and therefore yield a better painting performance. As a result, users can experience more effective and realistic VR painting with this system.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.97-107
• /
• 2000

PCBs [Polychlorinated biphenyls] are halogenated aromatic compounds with the empirical formula C12H10-nCln(n=1~10), and are a mixture of possible 209 different chlorinated congeners. PCBs were widely used as dielectric fluids for capacitors, transformers, plasticizers, lubricant inks, and paint additives. once released into the environment, PCBs persist for years because they are so resistant to degradation. In addition to their high degree of lipophilicity. In 1970s, the worldwide production of PCBs seem to be still in use. The environmental load of PCBs was prohibited since 1983 in Korea. In spite of these actions, many PCBs seem to be still in use. The environmental load of PCBs will continue to be recycled through air, land, water, and the biosphere for decades to come. This study was conducted to measure the concentrations of PCBs I the serum samples of 112 women by GC/MSD(Hewlett Packard 5897 Gas Chromatography-Mass Chromatography Detector) and CG/ECD(Hewlett Packard 5890 series-II gas chromatography-Electron capture detector, U.S.A). The main results of this study were as follows; The mean and standard deviation of serum PCBs were 3.613, 0.759 ppb, respectively and median of it was 3.828 ppb. The correlation coefficients of the concentrations of 13 PCB congeners ranged from 0.7913 to 0..9985 and were significantly correlated between each items(p=0.0001). The PCB concentrations were positively associated with age(simple linear regression; R2=0.86, =0.08023, p<0.001) and with total lipids in serums(simple linear regression; R=0.7058, =0.00486, p<0.001). The age adjusted model (Y=$\beta$0+$\beta$1age+$\beta$2X) was applied for possible predictors of PCBs levels in serum. For BMI(Body Mass Index), major residential area, and fish, meat, and dairy consumption, there was no association with PCBs levels, Also there was negative association for the number of pregnancy and lactation period with PCBs levels.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.524-526
• /
• 2011

ZSphere of ZBrush can be added to the screen, and most of all, added to the existing ZSphere as mobile geometrical objects. For example, legs can be produced out of the globoid in the progress of an intermediate step. characters with multiple limbs can be produced easily in this way. With Zsphere, several Child Spheres can be produced out of single Sphere, then these can be parents spheres, and can connect other Child Spheres. In this paper, by making each form through these processes, 3D characters were modeled to shape easily and rapidly. Since 3D objects can be added, rotated, and moved, they can interact smoothly with Z-depth of campus. To place these objects on the screen, paint, build fixed perspective image, smerge pixols and transform 3D objects, diverse transforming tools and sculpturing tools were used. The characters were designed in the way that first, the finished 3D characters were transformed into poly, then each side was restructured rapidly with Topology.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.505-510
• /
• 2002

Bans on TBT based antifouling paints have been drafted since 1998 by meetings 42, 43, 45 and 46 for the MEPC (Marine Environmental Protection Committee) of the International Marine Organization, and decided finally at a Diplomatic Conference of IMO in October 2001. It was a key issue that there should be a global prohibition on the application of organo-tin compounds as biocides in Anti-fouling systems by Jan. 2003, and a complete prohibition on the presence of organo-tin compounds on ships by 1 Jan. 2008. This paper suggests a method to design International Anti-fouling system cretificate, Record of anti-fouling system, Endorsement of the Records, Declaration on Anti-fouling System, Port State Control and reform(legislative) associated a law.

• Design & Manufacturing
• /
• v.10 no.2
• /
• pp.18-23
• /
• 2016

Injection molded thermoplastic parts may need to be coated to facilitate paint adhesion, or to satisfy other surface property requirements, such as appearance, durability, and weather resistance. In this paper, a two-component polyurethane metering system was developed for the simultaneous injection and surface coating of a plastic substrate. The system was composed of storage tanks, feed pumps, axial piston pumps, mixing head. The tank was designed to be double-jacket structured and fabricated for polyol and isocyanate, respectively. A temperature chamber was used to maintain the material temperature to be $80^{\circ}C$ during flowing from storage tank to mixing head. Inside the chamber, feed pump, low pressure filter, high pressure pump, high pressure filter, pressure sensor, flow meter were installed. A mixing head of L-type was used for homogeneous mixing of polyol and isocyanate. Inside the mixing head, a cartridge heater and a temperature sensor were installed to control the temperature of the materials. The flow rate of axial-piston pump was controlled by using closed-loop feedback control algorithm. The input flow-rates were compared with the measured values. The output error was 6.7% for open-loop control, whereas the error was below 2.2% for closed-loop control. In addition, the pressure generated through mixing-head nozzle increased with increasing flow rate. It was found that the pressure drop between metering pump and mixing-head nozzle was almost 10 bar.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.967-974
• /
• 2009

Experiments were conducted to measure the heat flux and temperature over a protuberance, using an impulse hypersonic shock tunnel-coaxial thermocouples and a blowdown hypersonic wind tunnel-temperature sensitive paints(TSP). Experimental data were compared with the heat flux data using a blowdown hypersonic wind tunnel-heat flux gauges and it was confirmed data sets agreed well. The measured heat flux is large when the height of the protuberance is large. Also, the heat flux measurements at the upper positions are larger than at the lower positions. For high protuberances, a severe jump in the heat flux is observed, from about 0.6~0.7 of the height of the protuberances. However, when the protuberance is sufficiently short, a rise in the heat flux is rarely observed as the protuberance is submerged totally under the separation region.

• Conservation Science in Museum
• /
• v.14
• /
• pp.13-22
• /
• 2013

The Nectar Ritual Painting(Jeung7551) in National Museum of Korea is estimated to have been produced in the 16th century. Ezimagodo who is the head priest of Ruganji in Kyoto, Japan donated this painting in 2010. Overall, damages were serious, such as missing, staining, folding, insects of the face and mounting silk, therefore, it need to conservation treatment. The treatment of conservation in painting was removing surface stains and repairing missing area. It was mounted by following the original form. The analysis result of textile in mounting and support fiber used silk and hemp in microscope. Pigments in paint were divided into six color types. This painting was used that vermilion(cinnabar) and red lead for red color, litharge(massicot) and gold for yellow color, lead white for white color, malachite for green color, azurite for blue color, and carbon black(chinese ink) for black color.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.531-538
• /
• 2012

Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.2
• /
• pp.82-89
• /
• 2011

Methylcyclohexane is frequently used in industrial sites (2,592tons/year) as rubber adhesives, ink, paint thinners, organic solvents, and so on. However, there are limited data on the toxic evaluation of methylcyclohexane. This study aims to predict the hazards and neurological effects of methylcyclohexane using SD rats in order to prevent health disorders of workers. The OECD Guideline for Testing of Chemicals (OECD, 2001) was used as a reference during the tests. For 13 weeks (once a day, five days per week) 0, 10, 100 and 1,000mg/kg/day of methylcyclohexane was injected to SD rats to observe any changes in the body or organ weight, hematology, histopathology, mobility, blood pressure, and neurotransmitter. As a result, some male and female SD rats injected with 1,000mg/kg/day of methylcyclohexane died. On the other hand, surviving rats showed significant changes such as hematological changes involving the decrease in the number of red blood corpuscles, and the decrease or increase in the weight of the lungs, kidneys, spleens, and livers (p< 0.05, p<0.01). Also histopathological lesions were observed in the hearts and kidneys. In the test for the effect on the nervous system, SD rats injected with 100mg/kg/day of methylcyclohexane had higher blood pressure levels compared to the control group. However, no abnormal effects was observed in the mobility, serotonin, neurotransmitter, and the biopsy of the brain and coronary arteries. The study results revealed that the livers, hearts, and kidneys were affected by methylcyclohexane. The absolute toxic dose of methylcyclohexane is 1,000mg/kg/day, NOAEL is 100 mg/kg/day, and it is not a toxic substance to the nervous system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2004

The angular dependence (or profile) of backscattered ultrasound was measured for steel specimens with a range of surface roughness, $1{\sim}71{\mu}m$. Backscattering profiles at or near the Rayleigh angle still showed roughness dependence while the assessment of surface roughness via normal profile became impossible due to the paint layer masking the roughness. The peak amplitude directly radiated at the Rayleigh angle was proportional to the surface roughness, while the averaged peak amplitude radiated from the backward propagating Rayleigh wave, produced by reflection at a corner, was inversely proportional. In the painted specimens, the linearity of direct backward radiation with the roughness was observed even at the roughness of less than three hundredths of a wavelength, and the abnormal multiple bark reflection caused by periodic roughness disappeared.