• Information and Communications Magazine
• /
• v.14 no.10
• /
• pp.83-93
• /
• 1997

7월1일 고속 페이징 서비스가 SK Telecom에서 자체 개발한 APS(Advanced Paging System)로 이루어지게 되었다. 본고에서는 시스템의 구조적 설계 개념에 대하여 간략히 소개하고자 한다. 이를 위하여 먼저 무선호출의 서비스 특성 분석과 이와 따른 시스템의 구조 정립 방법을 소개한 후, 적용 기술을 CTI(Computer Telephony Integration) 및 지능망 기술과 연계하여 설명하고자 한다. 또한 무선호출분야의 향후 발전방향에 대한 기술적 전망 분석과 이에 대한 현 시스템의 적응성에 대해서도 살펴보고저 한다.

• 전기의세계
• /
• v.49 no.10
• /
• pp.37-43
• /
• 2000

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2010

In this paper, we propose for improving QoS in wireless micro cellular network using Cellular-IP/PRC(Paging Route Cache) with Paging Cache and Route Cache in Cellular-IP and propose for performance of realtime and non-real time handoff service using Handoff state machine Paging Route Cache. Although the Cellular-IP/PRC technology is devised for mobile internet communication, it bas its vulnerability in frequent handoff environment. On the other hand, Cellular IP combines the capability of cellular networks to provide high performance handoff and efficient location management of active and idle mobile users with the inherent flexibility, robustness and scalability found in IP networks. Also Cellular-IP/PRC use semi-soft handoff. During semi-soft hand off a mobile host may be in contact with either of the old and new base stations and receive packets from them. Packets intended to the mobile node are sent to both base stations and buffered, so when the mobile host eventually moves to the new location it can continue to receive packets without interruption. It should be suitable for realtime service such as multimedia traffic. But, much waste of resource will occur in this method, especially for non-real time services such as FTP and E-mail. Therefore, a new algorithm that performs different handoff according to characteristic of each traffic by use of reserved field in IP packet is proposed in this thesis. This hand off state machine using differentiated handoff improves quality of services in Cellular-IP/PRC. Suggested algorithm shows better performance than existing technology in wireless mobile internet communication environment. Matlab simulation results are improving QoS, show call drop and call blocking provided to Paging Router Cache during handoff state machine in Cellular-IP/PRC.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.211-218
• /
• 2006

The Mobile IPv6 provides the enhanced internet services to user by supporting a node's mobility. In Mobile IPv6(MIPv6), the mobile node sends the binding message which binds home address(HoA) with care-of address(CoA) to the home agent whenever it changes its point of attachment to the internet. To reduce the mobility management signal message the Paging Hierarchical Mobile IPv6(PHMIPv6) is proposed. The mobile node does not send the binding message within the domain if the mobile node's state is idle. Therefore the mobility signal message cost can be reduced. However, when the mobile node's session arrival rate is high the many mobility management signal cost are needed because the paging cost is very high. In this paper, we analysis the drawback of PHMIPv6 and propose the scheme which can reduce the mobility management signal cost. The proposed scheme works independent of the number of subnet in the domain. Therefore the proposed scheme can improve the mobile node's mobility management scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6B
• /
• pp.544-550
• /
• 2006

Next-generation wireless/mobile networks are envisioned to have an IP-based infrastructure. One of the research challenges for next-generation all IP-based networks is the design of intelligent mobility management technologies that have a seamless mobility and minimal signaling overhead. Recently, HMIPv6 was proposed by the IETF for efficient mobility management. HMIPv6 reduces the amount of signaling and improves the performance of MIPv6 in terms of handover latency. However the MAP can be a single point of performance bottleneck when there are a lot of local movements. HMIPv6 can cause signaling overhead due to the unnecessary location update of idle mobile nodes. Therefore, in this paper, we propose the dynamic paging Mobile IPv6 that reduces the signaling cost of the unnecessary location updates using IP paging and organizes dynamically optimal MAP area according to user's mobility and traffic. We show performance results that are obtained from the average total location update cost and packet delivery cost.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2460-2469
• /
• 1999

Recently, appearing of various wireless telecommunications services, the competitive power of paging service is requested. In this paper, two-way paging earth station for satellite was proposed and designed to enhance the competitive power of cost and technique, and the link budget of this two-way paging networks using Koreas at was discussed. To reduce the cost of remote station, the antenna and HPA size of Hub and remote station were differently designed, and an idea of power allocations of inbound and outbound carriers was proposed and utilized in this link budget of two-way earth station for using satellite. The results of this link budget were follows. At the 0.043% time rate of rain, antenna size of Hub and remote station were 3.7m and 1.2m, the HPA size of Hub and remote station were 10.37W and 2.0W, and power allocations of outbound and inbound were 84% and 16% respectively. At the 0.02% time rate of rain, the antenna size of Hub and remote station were 3.7m and 1.8m and power allocations of outbound and inbound were 63% and 37% respectively.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.235-242
• /
• 2005

As the demands in a wireless network are recently increasing, it is necessary to promote the power efficiency of a wireless terminal, and to reduce the overhead of a network. To resolve such problems, we propose the paging technology and the structure of paging area with the joint access point in HPi (High-speed Portable Internet) network, which is being studied as the domestic next-generation IP packet data network. The application of the paging technology to the HPi network possesses the advantage of reducing the registration cost while a terminal in dormant state moves around, and the reporting cost of the terminal's location by the joint access point. The technology suggested in this paper causes the advantages that it promotes the power efficiency in user's point of view while it reduces the network overhead and makes the easy rearrangement of joint APs according to the changes of users' moving pattern in the network manager's point of view.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.342-350
• /
• 1999

Two location algorithm (TLA) considers two location areas (LAs) to track the location of a mobile station (MS). The TLA significantly outperforms the single location algorithm when the call-to-mobility ratio (CMR) is low (i.e., the user moves more frequently than to receive calls). However, because of the paging cost for the users moving back to the previously visited LA, the performance of the TLA degrades when the CMR is high. To reduce those paging cost, we propose the new algorithm called TLA with call information (TLAC). In TLAC, we use the location information of the MS within the setup message when the MS originates a call in the previously visited LA. Through the setup message, the system can know the exact location of the MS without the additional location registration operation, and the paging cost for the arriving calls in the visited LA can be reduced. An analytical model is proposed to compare the TLAC and previous TLA protocol. Our study indicates that the TLAC always guarantees better performance than the TLA. We also observe that the TLAC is much better than the TLA when the CMR is high.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.677-682
• /
• 2001

In a microcell environment having frequent inter-cell movement of a subscriber, the amount of signalling traffic rapidly increases due to the treatment of location update and other necessary actions. As a way to reduce such an overhead, this paper presents an algorithm that dynamically allocates subscribers paging and location areas each of which has a different size and shape, depending on the characteristics of subscriber mobility. Mathematical analysis results show that this algorithm allows reduced area management cost, compared to conventional algorithms.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.19-25
• /
• 2015

In this time, as an industrial society developed to a welfare society, more and more people want their quality of lives upgraded and specially customized service by mass production/mass consumption. And it leads to an increase of requiring service. There're active developments and studies on various IT equipment as the requirement made IT devices used in service. In this paper, we try to design and realize radio paging DID by using smart device to be used as a receiver of a radio pager which is broadly used at face to face service. Firstly, we used MCU to design and implement Wireless Calling Gateway which change radio calling signal of ISM band to smart device. A receiver of wireless caller used original receiver module. Also it used bluetooth module to communicate with smart device. It was possible to have satisfactory communication since radio paging signal converter and smart device were linked in 3M. Secondly, to indicate various paging information delivered from a radio pager, we realized DID application program by using Smart PAD. As a result, we could indicate various information compared to an original receiver which only could indicate letters or numeric data. Secondly, we implemented the DID app for wireless calls that can display a variety of information sent from a wireless pager. Was implemented using the Smart Pad. As a result, it is shown that can display a variety of information than the existing receiver.