• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.97-101
• /
• 2001

Recently, an excavated soil-recycling machine has been receiving considerable attentions. The mobile type excavated soil-recycling machine is able to improve the soils by adding the additives such as slaked lime and cement at the construction site. However, not only the mechanical factors such as paddle inclination angle and pitch of the paddle but also the physical properties of the excavated soils affect the mixing performance of the excavated soils and additives. In this sense, experimental investigations are uneconomical and ineffective. This paper concerns with the numerical simulator to analyze the mixing behavior of excavated soils and additives in the soil-recycling machine with dual shafts in order to assist the economical and effective design of the optimum soil-recycling machine. By using the simulator, several simulations were carried out, and the effects of some mechanical parameters such as the paddle inclination angle and pitch of the paddle on the mixing performance were made clear.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.24-30
• /
• 2016

In the water purification plant, the mixture of water and chemical from the mixing basin enters the flocculation basin. The rotating flocculators are generally used for the efficient flocculation of dregs. In this paper, the performance of flocculators of a vertical paddle type, widely used in the typical flocculation basins, and a hydro-foil type, recently disseminated in the field, are compared with each other by use of the numerical method. Also the characteristics and the efficiency are analyzed with CFD techniques. The strain rate and the eddy viscosity are compared for two types to predict the mixing efficiency, and the maximum speed and its location are pursued from the computed data. The hydrofoil type shows that the eddy viscosity is enhanced 1.66 to 3.03 times larger than that of vertical paddle type, and also produced 1.87 to 1.95 times larger flocs for each stage. However, the rapid rotation of hydrofoil may chop the floc to small size due to the higher turbulence intensity. From the result of computation, the strong and weak points of each type have been analyzed for the decision making.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.509-516
• /
• 2006

The solid-liquid mass transfer coefficients $k_L$ in a gas-liquid-solid three phases agitated vessel were measured with conventional impellers (e.g. Rushton turbine, paddle, and propeller). For the conventional impellers the rotational speed for the complete suspension $N_{js}$ changes with the impeller height and gas flow rate. Mass transfer coefficient of the Rushton turbin impeller, for which the particle suspension was independent of the aeration, is correlated only with Pgv. Mass transfer coefficients $k_L$ for the Rushton turbine, paddle and propeller impellers were affected by the impeller position.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.5
• /
• pp.327-333
• /
• 2008

The purpose of this study is to develop a paddle-type dryer and to commercialize the dryer, in which mixing and drying can be done simultaneously. According to a performance test, a newly-designed paddle-type dryer can dry Chitosan salt to a low moisture contents below 0.3%. Also the newly-designed dryer can dry air pollution materials, because the dryer can operate in a closed system. The economic efficiency of a newly-designed system and an existing system was compared in a performance test. As a result, the economic efficiency of a newly-designed system was higher than an existing system. In conclusion, it is thought that the newly-designed system has a high commercial value.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1599-1606
• /
• 2011

It is possible to study the load characteristics of full-scale hingeless rotor with the changing of physical smallscaled configurations such as rectangular and paddle blades, and metal and composite hubs. In this study, a static test, and a ground and wind-tunnel test were carried out using small-scale rotor models. The static test was carried out to confirm structural stiffness, characteristics of inertia, natural frequency, and damping ratio of rotors, and the ground and wind-tunnel test was carried out to confirm the stability and aerodynamic characteristics under hovering and forward flight conditions. According to the test results, the vertical load in the case of a combination of a small composite hub with paddle blades was higher than that in the case of a metal hub with paddle blades at same condition. Further, it was confirmed that the restraint of the combination of composite hub can be more flexible than the metal hub for the motion of paddle blades.

• KSBB Journal
• /
• v.4 no.3
• /
• pp.221-228
• /
• 1989

Celluose is an insoluble substrate, therefore, a proper mixing of the cellulose suspension is essential for an effective enzymatic hydrolysis. To study the effect of mixing motion of various enzyme reactors on enzymatic hydrolysis of cellulose, three distinct types of biroreator: vertical impeller type bioreator(VITB), horizontal paddle type bioreactor(HPTB), and tumbling drum type bioreactor(TDTB), were assembled and their performance was compared. The optimal agitation speed was 100rpm for VITB and HPTB, 200rpm for TDTB. The saccharification efficiency of each reactor was compared under the optimal agitation intensity. The highest degree of saccharification was achieved in the case of VITB, especially, at high cellulose concentration. The VITB seems to be the most suitable type of bioreactor that can maintain proper mixing pattern for effective enzyme reaction. In the view of energy consumption, the TDTB showed the lowest value: however, the energy consumption was rapidly increased at high concentration of celluose. To dertermine the most suitable type of bioreactor, the entire process, including substrate cost, substrate concentration, and feasibility of scale-up, needs to be evaluated.

• Korean Journal of Crystallography
• /
• v.15 no.2
• /
• pp.78-82
• /
• 2004

The solvothermal reaction of zinc(H) nitrate $(Zn(NO_3)_2\;{\cdot}\;6H_2O)$ with $ATP(2-aminoterephthalate,\;H_2N-C_6H_3-1,4-(COO)_2)$ in a mixture of solvents of DMF and ethanol, in the presence of benzene, gave a 2 dimensional zinc polymer [Zn(ATP) (DMF)] (1). X-ray structure determination revealed that two zinc metals and four ATP ligands form the paddle-wheel SBUs, which are linked by the ATP ligands to give a 2-D square-grid network. Each square grid has approximate dimensions of $11.1\times11.1\;{\AA}$ based on Zn metals. Benzene was required to produce high-quality crystals of polymer 1.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.105-111
• /
• 2000

Micronization of sensor is a trend of the silicon sensor development with regard to a piezoresistive silicon pressure sensor, the size of the pressure sensor diaphragm have become smaller year by year, and a microaccelerometer with a size less than 200~300${\mu}{\textrm}{m}$ has been realized. Over the past four or five years, numerical modeling of microsensors and microstructures has gradually been developed as a field of microelectromechanical system(MEMS) design process. In this paper, we study some of the micromachining processes of single crystal silicon(SCS) for the microaccelerometer, and their subsequent processes which might affect thermal and mechanical loads. The finite element method(FEM) has been a standard numerical modeling technique extensively utilized in structural engineering discipline for component design of microaccelerometer. Temperature rise sufficiently low at the suspended beams. Instead, larger temperature gradient can be seen at the bottom of paddle part. The center of paddle part becomes about 5~2$0^{\circ}C$ higher than the corner of paddle and suspended beam edges.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.197-209
• /
• 2014

환경 오염에 대한 우려의 목소리가 높아지면서 Green chemistry 분야가 각광을 받고 있다. 이 분야에서는 환경에 영향을 적게 미치기 위한 방법의 일환으로 촉매를 연구하며, 그 촉매는 착화합물인 경우가 많다. 그러나 착화합물 내에서 리간드와 금속 이온간의 결합은 예측하기 어렵다. 이는 전형금속보다는 전이금속에서 더욱 심하며, 그 중 한 예로 전이금속에서는 여러 개의 금속 이온이 서로 직접적으로 결합한 채 리간드와 결합하는 착화합물이 발견되기도 한다. 다중 금속 착화합물(Multimetal Complex)로 부르는 이러한 구조는 특유의 복잡함 때문에 잘 알려져 있지 않음에도 불구하고 착화합물의 물리적, 화학적 성질에 직접적으로 영향을 주기에 촉매나 센서, 특히 이를 이용하여 구조체를 만드는 MOF(Metal-Organic Framework) 분야에서는 꼭 알고 있어야 하는 사항이다. 이 연구에서는 GAMESS로 density functional theory (B3LYP functional)를 이용한 양자계산을 수행하여 그 중 가장 간단한 구조인 Dimetal Complex, 그 중에서도 MOF 내에서 많이 발견되는 수차 형태(Paddle wheel) 착화합물에 대해서 다루었다. Cu를 기준으로 그와 비슷한 주기나 족에 있는 Ru, Ag, Zn 등의 금속으로 만든 Paddle wheel 구조의 에너지를 비교하여 Cu가 다른 금속에 비해 이 구조를 안정하게 형성할 수 있는 이유를 알아보았다. 더 나아가 이 구조가 MOF의 형성과 성질에 어떠한 연관성이 있는지 분석함으로써 어떠한 조건이 MOF의 성질을 극대화시킬 수 있는지도 알아보았다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.308-310
• /
• 2022

With the rise of the Al wave, task-oriented dialogue systems have become one of the popular research directions in academia and industry. Currently, task-oriented dialogue systems mainly adopt pipelined form, which mainly includes natural language understanding, dialogue state decision making, dialogue state tracking and natural language generation. However, pipelining is prone to error propagation, so many task-oriented dialogue systems in the market are only for single-round dialogues. Usually single- domain dialogues have relatively accurate semantic understanding, while they tend to perform poorly on multi-domain, multi-round dialogue datasets. To solve these issues, we developed a paddle-based multi-domain task-oriented Chinese dialogue system. It is based on NEZHA-base pre-training model and CrossWOZ dataset, and uses intention recognition module, dichotomous slot recognition module and NER recognition module to do DST and generate replies based on rules. Experiments show that the dialogue system not only makes good use of the context, but also effectively addresses long-term dependencies. In our approach, the DST of dialogue tracking state is improved, and our DST can identify multiple slotted key-value pairs involved in the discourse, which eliminates the need for manual tagging and thus greatly saves manpower.