• 문화기술의 융합
• /
• 제7권2호
• /
• pp.405-410
• /
• 2021

본 연구에서는 레일체결장치용 방진패드의 사용수명 및 스프링강성을 평가하고자 비선형 재료모델 및 피로하중조건을 적용한 유한요소해석을 수행하였다. 피로해석 결과, 초기조건 대비 스프링강성의 변화율은 약 16%로 나타나 피로경화가 발생된 것으로 분석되었다. 방진패드의 길이방향으로 발생되는 응력은 중앙부와 외곽부(Edge)의 발생응력의 차이가 약 10배 이상 발생되었다. 또한 중앙부 보다 외곽 경계부의 등가응력이 2배 이상 크게 발생하는 것으로 분석되었다. 따라서 실제 사용조건에서 방진패드의 손상 및 변형 취약부는 방진패드의 모서리부분인 것으로 분석되었다. 피로해석을 통해 산출된 반복횟수에 따른 방진패드의 등가응력을 이용하여 방진패드의 피로수명선도를 도출하였다. 본 연구에서 도출한 방진패드의 피로수명선도를 이용하여 향후 다양한 하중조건에서 방진패드의 등가응력을 산출하여 해당조건에서의 피로수명을 예측하는 데에 활용이 가능할 것으로 판단된다.

• 청정기술
• /
• 제28권4호
• /
• pp.323-330
• /
• 2022

미세유체 종이-기반 분석 장치는 최근 현장 진단 및 환경 물질 감지를 포함한 다양한 적용가능성으로 주목을 받고 있다. 본 연구는 적은 비용과 간단한 검출 방법으로 중금속을 빠르게 검출할 수 있는 3D-μPAD를 제작하기 위해 PDMS 양면 인쇄 방법을 제안하였다. 3D-μPAD 디자인은 레이저 커팅으로 아크릴 스탬프에 적용할 수 있으며, 제작된 스탬프에 PDMS 고분자를 스핀 코팅 후 양면접촉인쇄 방식 도입을 통해 3차원 형태의 소수성 장벽 형성에 필요한 조건을 확인하였다. 구체적으로 소수성 장벽 형성 조건인 고분자 농도, 스핀 코팅 속도 및 접촉 시간에 따라 PDMS 소수성 장벽 면적과 친수성 채널의 면적 변화를 분석함으로써 3D-μPAD 제작 공정 조건 최적화를 수행하였다. 최적화된 μPAD로 니켈, 구리, 수은 이온, pH를 다양한 농도에서 검출하였고 이를 ImageJ 프로그램으로 분석하여 grayscale 값으로 정량화 하였다. 이를 통해 3D-μPAD를 제작함으로써 특별한 분석 기기 없이 다양한 중금속 비색 검출을 수행함으로써 조기진단 바이오 센서로의 응용 가능성을 증명하였다. 이 3D-μPAD는 휴대가 간편한 다중 금속이온 검출 바이오센서로서, 신속한 현장 모니터링이 가능하므로 개발도상국 같은 자원이 제한된 지역에서 유용하게 사용 가능하다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권3호
• /
• pp.185-190
• /
• 1998

Various local flaps and distant flaps including tongue flap, palatal island flap, and buccal flap as well as skin grafts have been used for the reconstruction of oral mucosal defect. In the posterior region of oral cavity and the buccal cheek area, buccal fat pad can be used as a pedicled graft. The buccal fat pad is different from other subcutaneous fat tissue and it is easily accessible. There are many advantages in pedicled buccal fat pad graft for the closure of oral mucosal defect. The procedure is easy, there is no visible scar in the donor site, it is capable of reconstruction of various contour, and it has good viability. We had used buccal fat pad as a pedicled graft for the closure of oral mucosal defect after the excision of tumor and the oroantral fistula. From the results of these cases, we concluded that the use of the buccal fat pad flaps was worth of the consideration for the reconstruction of oral mucosal defect in the regions of the buccal cheek, and posterior oral cavity.

• 대한가정학회지
• /
• 제44권3호
• /
• pp.91-102
• /
• 2006

The following research compares the two apparel systems that are used in Korean colleges, Gerber and PAD, by analyzing the advantages and disadvantages of their Dart-related functions in the pattern construction process. The results are as follows. 1. Regarding transformation methods, the Gerber system was able to use pivot method, while the PAD system was able to use both pivot method and slash methods. in other issues, the PAD system was not able to synthesize more than two Darts, and only showed differences for other functions. On the other hand, the diamond-shape Dart and diagonal Dart could be produced only in the PAD system, while curvy shaped Dart could not be produced in either system. 2. The change in side lines due to the change of Dart width only occurred in the PAD system, while the change in Dart length only occurred in the Gerber system; both systems need improvement. 3. As for the pattern outer line connection capability, which is a Dart automatic transformation function, both systems showed unnatural shapes which need to be corrected. 4. We first constructed a Dart shape composition chart according to the number of Darts. Based on this, we examined whether they have appropriate shapes. Among single-Darts, the Gerber system had an inappropriate, outer-line shape for Underarm Dart and Center Front Dart, and among two-Darts, it was inappropriate for Side and Waist Dart.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.58-58
• /
• 2009

Uniformity related issues in chemical mechanical polishing (CMP) are within wafer non-uniformity (WIWNU), wafer to wafer non-uniformity (WTWNU), planarity and dishing/erosion. Here, the WIWNU that originates from spatial distribution of independent variables such as temperature, sliding distance, down force and material removal rate (MRR) during CMP, relies to spatial dependency. Among various sources of spatial irregularity, hardness and modulus of pad and surface roughness in sources for pad uniformity are great, especially. So, we investigated the spatial variation of pad surface characteristics using pad measuring system (PMS) and roughness measuring system. Reduced peak height ($R_{pk}$) of roughness parameter shows a strong correlation with the removal rate, and the distribution of relative sliding distance onwafer during polishing has an effect on the variation of $R_{pk}$ and WIWNU. Also, the results of pad wear profile thorough developed pad profiler well coincides with the kinematical simulation of conditioning, and it can contribute for the enhancement of WIWNU in CMP process.

• 한국의류학회지
• /
• 제44권3호
• /
• pp.485-498
• /
• 2020

Sanitary pads are used with for the sanitization of menstruation bleeding. In this research, twenty medium size disposable sanitary pads were selected from domestic and international brands in order to analyze their shape and size. Additionally, 6 sanitary pads were selected among the 20, and user experience evaluations were completed. The analysis on the shape of the 20 sanitary pads showed that straight-shape pads existed more than curved-shape pads. The means of total pad length, wing length, wing width, front pad width, back pad width, front pad length, and back pad length were 24.5 cm, 8.8 cm, 3.0 cm, 10.0 cm, 10.2 cm, 11.6 cm, and 13.0 cm, respectively. All selected pads were medium size; however, detailed sizes varied between brands. Eighty-one women participated on user experience evaluation. Participants felt that brand F was the longest and brand D the shortest. The results matched with the results on actual pad length measurement. Participants evaluated the fit of brand E most positively and fit of brand A most negatively. The current study provides valuable information for developing disposable sanitary pads.

• 방송공학회논문지
• /
• 제8권3호
• /
• pp.217-227
• /
• 2003

본 논문에서는 디지털 멀티미디어 방송(Digital Multimedia Broadcasting, DMB)의 한 서비스 형태인 슬라이드 쇼(sude-show) 기능 구현에 대해 서술한다. 기존의 아날로그 라디오 방송에서는 단순히 오디오만 청취할 수 있었던 것에 반해, DMB 슬라이드 쇼는 오디오에 관련된 정지 영상들을 함께 볼 수 있도록 하는 기능이다. 예를 들어, 오디오에 상응하는 가수에 대한 이미지나 앨범 재킷, 가사 정보를 사용자에게 전달할 수 있다. 슬라이드 쇼를 전송할 수 있는 방식에는 두 가지가 있는데, 오디오 비트스트림 내의 PAD(Program Associated Data) 영역을 이용하거나 오디오 비트스트림과는 별도의 데이터 스트림으로 구성하여 다른 서비스용 비트스트림과 다중화하여 전송한다. 본 논문에서는 PAD를 이용한 슬라이드 쇼 기능을 위해 송신 측에서 오디오 비트스트림의 PAD에 슬라이드 쇼 데이터를 오디오와 동기가 맞게 생성하는 모듈과 수신 측에서 이러한 오디오 비트스트림을 입력받아 사용자에게 슬라이드 쇼를 보여줄 수 있는 수신용 애플리케이션 모듈을 PC 환경에서 구현하고 실험을 통하여 검증하였다.

• 열처리공학회지
• /
• 제19권1호
• /
• pp.30-36
• /
• 2006

Fretting fatigue behavior of SCM420 steel commonly used in the automotive industry for structural applications was investigated in this study. In addition, the effect of bridge pad on the fretting fatigue test was evaluated from different pad materials and following conclusions were drawn. Simple fatigue limit of SCM 420 steel was determined to be 350 MPa while this value was 225 MPa and 285.5 MPa with SCM420H and with SM45C pad, respectively. Reduction in fatigue limit was, thus found to be 35.7% and 17.9% with SCM 420H pad and SM45C pad, respectively. Results of fracture surface observation revealed that typical striation pattern of fatigue failure existed as well as dimpled and cleavage frature appearance was found in final fractured region. From the EDS compositional analysis, test sample and pad part all had high signals for oxygen and iron, suggesting that worn particles might be iron oxide, although exact chemical composition has to be confirmed. Considerable reduction in fatigue life was apparent in SCM 420 steel under fretting fatigue against simple fatigue. Such reduced fatigue life by fretting damage should be considered as an important factor not only in the viewpoint of repairing but also inevitably in the design stage of structural components.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.156-162
• /
• 2002

There are many factors affecting the results of CMP (Chemical Mechanical Polishing). Among them, the temperature is related to the removal rate and WIWNU (Within Wafer Non-Uniformity). In other words, the removal rate is proportional to the temperature and the variation of temperature distribution on a pad affects the non-uniformity within a wafer. In the former case, the active chemistry improves the rate of chemical reaction and the removal rate becomes better. But, there are not many advanced studies. In the latter case, a kinematical analysis between work-piece and pad can be obtained. And such result analysed from the mechanical aspect can be directly related to the temperature distribution on a pad affecting WIWNU. Meanwhile, the temperature change affects the quantities of both slurry and pad. The change of a pH value of the slurry chemistry due to a temperature variation affects the surface state of an abrasive particle and hence the agglomeration of abrasives happens above the certain temperature. And the pH alteration also affects the zeta potential of a pad surface and therefore the electrical force between pad and abrasive changes. Such results could affect the removal rate and etc. Moreover, the temperature changes the 1st and 2nd elastic moduli of a pad which are closely related to the removal rate and the WIWNU.

• 한국생활과학회지
• /
• 제15권3호
• /
• pp.457-467
• /
• 2006

The following research compares two mostly-used apparel systems that are used in colleges of Korea, Gerber and PAD, by analyzing advantages and disadvantages of their Dart, Tuck and Pleats-related functions in pattern construction process. The results are the following: First, regarding transformation methods, Gerber system was able to use pivot method, while PAD system was able to use both pivot and slash method. As for movement, distribution, synthesis, folding, producing additional Dart function, the PAD system was not able to synthesize more than two Darts, and only showed differences for other functions. On the other hand, the diamond-shape Dart and diagonal Dart can be produced only in PAD system, while none of curvy shaped Dart can be produced in both systems. Second, as for pattern outer line connection capability, which is a Dart automatic transformation function, both systems showed unnatural shapes and need for correction. Third, when constructing according to the type of Tuck, we could distribute multiple Darts at a time with PAD system, while with Gerber system, distribution into multiple Darts at a time was impossible at all. Fourth, when constructing according to the contour of Pleats, Gerber system made it possible to make construction of multiple lines and box/inverted Pleats with just one order, but PAD system required repetitive tasks, which remains room for enhancement in regard to such inefficiency.