• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.405-410
• /
• 2021

In this study, a finite element analysis was performed applying a nonlinear material model and fatigue load conditions to evaluate the service life and spring stiffness of the resilient pad for rail fastening system. As a result of the fatigue analysis, the rate of change in spring stiffness compared to the initial condition was about 16%, indicating that fatigue hardening occurred. As for the stress generated in the longitudinal direction of the resilient pad, the difference between the stress generated at the center and the edge was about 10 times or more. In addition, it was analyzed that the equivalent stress of the outer boundary was more than twice as large as that of the central part. Therefore, it was analyzed that the damage and deformation of the resilient pad are the corners of the resilient pad under actual service conditions. The fatigue life diagram of the resilient pad (S-N curve) was derived using the equivalent stress of the resilient pad according to the fatigue cycles. Using the fatigue life diagram of the resilient pad derived in this study, it is considered that it can be used to predict the fatigue life under the relevant conditions by calculating the equivalent stress of the resilient pad under various load conditions.

• Clean Technology
• /
• v.28 no.4
• /
• pp.323-330
• /
• 2022

Microfluidic paper-based analytical devices (μPADs) have recently been in the spotlight for their applicability in point-of-care diagnostics and environmental material detection. This study presents a double-sided printing method for fabricating 3D-μPADs, providing simple and cost effective metal ion detection. The design of the 3D-μPAD was made into an acryl stamp by laser cutting and then coating it with a thin layer of PDMS using the spin-coating method. This fabricated stamp was used to form the 3D structure of the hydrophobic barrier through a double-sided contact printing method. The fabrication of the 3D hydrophobic barrier within a single sheet was optimized by controlling the spin-coating rate, reagent ratio and contacting time. The optimal conditions were found by analyzing the area change of the PDMS hydrophobic barrier and hydrophilic channel using ink with chromatography paper. Using the fabricated 3D-μPAD under optimized conditions, Ni²⁺, Cu²⁺, Hg²⁺, and pH were detected at different concentrations and displayed with color intensity in grayscale for quantitative analysis using ImageJ. This study demonstrated that a 3D-μPAD biosensor can be applied to detect metal ions without special analysis equipment. This 3D-μPAD provides a highly portable and rapid on-site monitoring platform for detecting multiple heavy metal ions with extremely high repeatability, which is useful for resource-limited areas and developing countries.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.3
• /
• pp.185-190
• /
• 1998

Various local flaps and distant flaps including tongue flap, palatal island flap, and buccal flap as well as skin grafts have been used for the reconstruction of oral mucosal defect. In the posterior region of oral cavity and the buccal cheek area, buccal fat pad can be used as a pedicled graft. The buccal fat pad is different from other subcutaneous fat tissue and it is easily accessible. There are many advantages in pedicled buccal fat pad graft for the closure of oral mucosal defect. The procedure is easy, there is no visible scar in the donor site, it is capable of reconstruction of various contour, and it has good viability. We had used buccal fat pad as a pedicled graft for the closure of oral mucosal defect after the excision of tumor and the oroantral fistula. From the results of these cases, we concluded that the use of the buccal fat pad flaps was worth of the consideration for the reconstruction of oral mucosal defect in the regions of the buccal cheek, and posterior oral cavity.

• Journal of the Korean Home Economics Association
• /
• v.44 no.3 s.217
• /
• pp.91-102
• /
• 2006

The following research compares the two apparel systems that are used in Korean colleges, Gerber and PAD, by analyzing the advantages and disadvantages of their Dart-related functions in the pattern construction process. The results are as follows. 1. Regarding transformation methods, the Gerber system was able to use pivot method, while the PAD system was able to use both pivot method and slash methods. in other issues, the PAD system was not able to synthesize more than two Darts, and only showed differences for other functions. On the other hand, the diamond-shape Dart and diagonal Dart could be produced only in the PAD system, while curvy shaped Dart could not be produced in either system. 2. The change in side lines due to the change of Dart width only occurred in the PAD system, while the change in Dart length only occurred in the Gerber system; both systems need improvement. 3. As for the pattern outer line connection capability, which is a Dart automatic transformation function, both systems showed unnatural shapes which need to be corrected. 4. We first constructed a Dart shape composition chart according to the number of Darts. Based on this, we examined whether they have appropriate shapes. Among single-Darts, the Gerber system had an inappropriate, outer-line shape for Underarm Dart and Center Front Dart, and among two-Darts, it was inappropriate for Side and Waist Dart.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.58-58
• /
• 2009

Uniformity related issues in chemical mechanical polishing (CMP) are within wafer non-uniformity (WIWNU), wafer to wafer non-uniformity (WTWNU), planarity and dishing/erosion. Here, the WIWNU that originates from spatial distribution of independent variables such as temperature, sliding distance, down force and material removal rate (MRR) during CMP, relies to spatial dependency. Among various sources of spatial irregularity, hardness and modulus of pad and surface roughness in sources for pad uniformity are great, especially. So, we investigated the spatial variation of pad surface characteristics using pad measuring system (PMS) and roughness measuring system. Reduced peak height ($R_{pk}$) of roughness parameter shows a strong correlation with the removal rate, and the distribution of relative sliding distance onwafer during polishing has an effect on the variation of $R_{pk}$ and WIWNU. Also, the results of pad wear profile thorough developed pad profiler well coincides with the kinematical simulation of conditioning, and it can contribute for the enhancement of WIWNU in CMP process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.3
• /
• pp.485-498
• /
• 2020

Sanitary pads are used with for the sanitization of menstruation bleeding. In this research, twenty medium size disposable sanitary pads were selected from domestic and international brands in order to analyze their shape and size. Additionally, 6 sanitary pads were selected among the 20, and user experience evaluations were completed. The analysis on the shape of the 20 sanitary pads showed that straight-shape pads existed more than curved-shape pads. The means of total pad length, wing length, wing width, front pad width, back pad width, front pad length, and back pad length were 24.5 cm, 8.8 cm, 3.0 cm, 10.0 cm, 10.2 cm, 11.6 cm, and 13.0 cm, respectively. All selected pads were medium size; however, detailed sizes varied between brands. Eighty-one women participated on user experience evaluation. Participants felt that brand F was the longest and brand D the shortest. The results matched with the results on actual pad length measurement. Participants evaluated the fit of brand E most positively and fit of brand A most negatively. The current study provides valuable information for developing disposable sanitary pads.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.217-227
• /
• 2003

This paper describes an implementation of the slide-show functionality, which is one of the services that can be provided by the Digital Multimedia Broadcasting (DMB). While the existing analog radio broadcasting services provide audio only, DMB slide-show is the functionality that can deliver still images associated with the audio. For example, it can deliver the photographs of the singer, album cover images, or the lyrics of the song that correspond to the audio. There are two modes for the transmission of the slide-show. Firstly. the program-associated data (PAD) field within the DMB audio frame can be utilized and secondly, the slide-show data can be transmitted, after being multiplexed, with other service data as individual data stream separated from the audio. This paper describes PC-based implementations of a transmitter-side module that inserts slide-show data into the PAD area within audio bitstream and a receiver-side application module that plays the slide-show through decoding the PAD within the received audio bitstream and demonstrates their validity through experiments.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2006

Fretting fatigue behavior of SCM420 steel commonly used in the automotive industry for structural applications was investigated in this study. In addition, the effect of bridge pad on the fretting fatigue test was evaluated from different pad materials and following conclusions were drawn. Simple fatigue limit of SCM 420 steel was determined to be 350 MPa while this value was 225 MPa and 285.5 MPa with SCM420H and with SM45C pad, respectively. Reduction in fatigue limit was, thus found to be 35.7% and 17.9% with SCM 420H pad and SM45C pad, respectively. Results of fracture surface observation revealed that typical striation pattern of fatigue failure existed as well as dimpled and cleavage frature appearance was found in final fractured region. From the EDS compositional analysis, test sample and pad part all had high signals for oxygen and iron, suggesting that worn particles might be iron oxide, although exact chemical composition has to be confirmed. Considerable reduction in fatigue life was apparent in SCM 420 steel under fretting fatigue against simple fatigue. Such reduced fatigue life by fretting damage should be considered as an important factor not only in the viewpoint of repairing but also inevitably in the design stage of structural components.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.156-162
• /
• 2002

There are many factors affecting the results of CMP (Chemical Mechanical Polishing). Among them, the temperature is related to the removal rate and WIWNU (Within Wafer Non-Uniformity). In other words, the removal rate is proportional to the temperature and the variation of temperature distribution on a pad affects the non-uniformity within a wafer. In the former case, the active chemistry improves the rate of chemical reaction and the removal rate becomes better. But, there are not many advanced studies. In the latter case, a kinematical analysis between work-piece and pad can be obtained. And such result analysed from the mechanical aspect can be directly related to the temperature distribution on a pad affecting WIWNU. Meanwhile, the temperature change affects the quantities of both slurry and pad. The change of a pH value of the slurry chemistry due to a temperature variation affects the surface state of an abrasive particle and hence the agglomeration of abrasives happens above the certain temperature. And the pH alteration also affects the zeta potential of a pad surface and therefore the electrical force between pad and abrasive changes. Such results could affect the removal rate and etc. Moreover, the temperature changes the 1st and 2nd elastic moduli of a pad which are closely related to the removal rate and the WIWNU.

• Korean Journal of Human Ecology
• /
• v.15 no.3
• /
• pp.457-467
• /
• 2006

The following research compares two mostly-used apparel systems that are used in colleges of Korea, Gerber and PAD, by analyzing advantages and disadvantages of their Dart, Tuck and Pleats-related functions in pattern construction process. The results are the following: First, regarding transformation methods, Gerber system was able to use pivot method, while PAD system was able to use both pivot and slash method. As for movement, distribution, synthesis, folding, producing additional Dart function, the PAD system was not able to synthesize more than two Darts, and only showed differences for other functions. On the other hand, the diamond-shape Dart and diagonal Dart can be produced only in PAD system, while none of curvy shaped Dart can be produced in both systems. Second, as for pattern outer line connection capability, which is a Dart automatic transformation function, both systems showed unnatural shapes and need for correction. Third, when constructing according to the type of Tuck, we could distribute multiple Darts at a time with PAD system, while with Gerber system, distribution into multiple Darts at a time was impossible at all. Fourth, when constructing according to the contour of Pleats, Gerber system made it possible to make construction of multiple lines and box/inverted Pleats with just one order, but PAD system required repetitive tasks, which remains room for enhancement in regard to such inefficiency.