• 생물환경조절학회지
• /
• 제22권2호
• /
• pp.175-181
• /
• 2013

최근 신선 유통되는 퉁퉁마디는 식물 체내 수분 함량이 높고 조직이 단단하지 못해 저장성이 낮은 식물로 MA 저장을 통해 저장성을 향상시키고, 최근 새롭게 개발된 비천공 breathable(NPB) 필름을 적용하여 각기 $5^{\circ}C$와 $10^{\circ}C$로 저장하여 실제 유통 수준에서의 영향을 알아 보았다. 또한 신선 편이 제품으로의 유통 가능성을 알아보기 위하여 3cm, 5cm, 그리고 10cm로 각각 절단하여 저장성을 상호 비교하였다. 그 결과 $10^{\circ}C$에 비하여 $5^{\circ}C$ 저장 조건이 NPB 필름을 적용 하였을 경우 저장력이 우수한 결과를 보였는데 저장중 생체중의 감소율은 $5^{\circ}C$에서 25일 저장 종료일까지 2% 이내의 결과를 보였고 $10^{\circ}C$에서는 저장 15일 후에 100,000cc NPB 필름을 제외하고 2% 이내의 감소율을 나타내었다. $5^{\circ}C$와 동일 기간인 15일을 기준으로 비교하면 $5^{\circ}C$가 1% 이내의 감소율을 나타내 상대적으로 우수한 결과를 보였다. 동일기간 동안 측정한 이산화탄소와 산소 농도의 변화에서는 5,000cc NPB 필름이 MA 저장시의 특징을 보였다. 저장중 포장내 에틸렌 농도는 진공 필름에서 NPB 필름처리들보다 10~100배까지 높았으나, 크기별 차이에 통계적 유의성은 없었다. 각기 $5^{\circ}C$에서 25일간 그리고 $10^{\circ}C$에서 15일간 저장한 이후 항산화 활성을 측정, 상호 비교한 결과 $5^{\circ}C$가 $10^{\circ}C$보다 두배 이상의 항산화 활성도를 나타내었고 100,000cc NPB 필름에서 높은 활성도를 보였고 크기별로는 10cm 크기가 활성도가 낮아지지 않는 것으로 나타났다. 저장 종료후 관능검사를 통한 외관품질과 이취를 평가한 결과 $5^{\circ}C$ 처리와 5,000cc 필름을 적용한 구에서 상대적으로 높은 수준으로 나타났다. 본 실험을 통하여 $5^{\circ}C$, 저장시 5,000cc NPB 필름을 MA 저장에 적용하는 것이 타당하다는 결과를 얻을 수 있었다. 다만 실제 유통 현장에서 사용되는 온도조건이 $10^{\circ}C$임을 고려하면 $10^{\circ}C$ 저장 시 10cm 크기에는 100,000cc NPB 필름이 단기유통이라는 측면에서 적용이 가능할 것 으로 판단되었다.

• 한국포장학회지
• /
• 제23권1호
• /
• pp.1-7
• /
• 2017

RFID 시스템의 성능은 태그의 종류 및 리더 자체 성능뿐만 아니라 RFID 시스템을 응용하기 위한 물품의 종류, 포장 재질에 따른 태그 선택과 이에 따른 태그의 부착 위치 그리고 Antenna의 인식각도 등에 따라 큰 차이를 보인다. 본 연구는 이를 위해 RFID 인식률에 영향을 미치는 다양한 요인 중 가장 큰 영향을 미치는 수분함량을 중심으로 수분 함량별 RFID 인식률과 수분 함량에 따른 RFID 태그 사이의 거리 인식률 그리고 수분 함량에 따른 RFID 태그와 접촉면적에 따른 인식률을 측정하였다. 수분함량에 따른 인식률 분석에서는 0~25%의 수분을 함유할 경우 100% 인식이 가능하였으며, 수분함량이 30% 이상부터는 95% 이하 수준으로 떨어졌다. 수분 함량에 따른 RFID 태그 사이의 거리 인식률은 태그가 맞닿아 있을 경우보다 0.3 cm 이상일 경우가 더 인식률이 높았으며, 수분 함량에 따른 RFID 태그와 접촉면적에 따른 인식률에서는 접촉면적이 넓어질수록 인식률이 떨어지는 것을 확인하였다.

• Journal of Information Display
• /
• 제11권1호
• /
• pp.8-11
• /
• 2010

In this study, a new thin films passivation technique using Zn with high electronegativity and $MgF_2$, a fluorine material with better optical transmittance than the sealing film materials that have thus far been reported was proposed. Targets with various ratios of $MgF_2$ to Zn (5:5, 4:6 and 3:7) were fabricated to control the amount of Zn in the passivation films. The Mg-Zn-F films were deposited onto the substrates and Zn was located in the gap between the lattices of $MgF_2$ without chemical metathesis in the Mg-Zn-F films. The thickness and optical transmittance of the deposited passivation films were approximately 200 nm and 80%, respectively. It was confirmed via electron dispersive spectroscopy (EDS) analysis that the Zn content of the film that was sputtered using a 4:6 ratio target was 9.84 wt%. The Zn contents of the films made from the 5:5 and 3:7 ratio targets were 2.07 and 5.01 wt%, respectively. The water vapor transmission rate (WVTR) was determined to be $38^{\circ}C$, RH 90-100%. The WVTR of the Mg-Zn-F film that was deposited with a 4:6 ratio target nearly reached the limit of the equipment, $1\times10^{-3}\;gm^2{\cdot}day$. As the Zn portion increased, the packing density also increased, and it was found that the passivation films effectively prevented the permeation by either oxygen or water vapor. To measure the characteristics of gas barrier, the film was applied to the emitting device to evaluate their lifetime. The lifetime of the applied device with passivation was increased to 25 times that of the PLED device, which was non-passivated.

• 한국산업보건학회지
• /
• 제26권2호
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• Journal of Animal Science and Technology
• /
• 제50권3호
• /
• pp.391-400
• /
• 2008

악취는　이웃주민들로　하여금　민원을　유발시키는　주요　원인이기　때문에　악취관리는　지속가능한 축산과　매우 밀접한 관계가 있다. 본 연구는 메탄발효와 퇴비화 공정이 연계된 가축분뇨 처리시설에서 각 공정별로 기기분석과 직접 관능법을 병행하여 악취 물질의 농도, 악취 강도 및 악취 불쾌도를 측정하고자 수행하였으며, 하계와 동계로 구분하여 처리 공정과 부지경계선에서 각각 암모니아, 황화합물 및 휘발성 저급지방산의 농도를 분석하였다. 높은 외기온에 기인하여 하계의 악취농도가 동계보다 높은 것으로 나타났다. 공정별로는 혼합된 분뇨를 교반하는 퇴비화 공정에서 악취 농도가 가장 높게 검출되었으며, 분뇨 투입조, 퇴비 후숙조, 분뇨 유출조 및 퇴비 선별과 포장 공정의 순으로 악취 농도가 낮았다. 검출된 악취 물질 중 가장 높은 농도는 암모니아로 3.4에서 224.7 ppm의 농도 범위로 분석되었다. 황화합물 중에서는 황화수소가 가장 높은 농도인 2.3 ppm인 것으로 분석되었으며, 대부분의 황화합물 농도가 기존에 보고된 최소감지한계농도를 초과하는 것으로 측정되었다. 또한 아세트산은 휘발성 저급지방산 가운데 51에서 89%로 가장 놓은 비율을 차지하고 있으며, 다음으로는 프로피온산과 부트르산이 각각 1.9에서 35% 및 1.8에서 15%의 비율을 보이는 것으로 나타났다. 처리공정에서 발생되는 주요 악취원인 물질을 예측하고자 각각의 공정에서 측정된 악취물질의 농도를 최소감지한계농도로 나누어 악취농도지수를 계산하였다. 그 결과 퇴비화 공정에서는 황화수소, 암모니아, 황화메틸 및 메틸머캅탄이 악취원인 물질로 밀접한 연관이 있는 것으로 나타났으며, 분뇨 투입조에서는 황화수소, 메틸머캅탄 및 부트르산이 주요 악취물질인 것으로 나타났다.