• Horticultural Science & Technology
• /
• v.35 no.3
• /
• pp.314-322
• /
• 2017

The aim of this study was to determine suitable oxygen transmission rate (OTR) films for modified atmosphere (MA) storage of asparagus spears (Asparagus officinalis L.), and to examine the related changes in asparagus spear quality. Asparagus spears were packed with 10,000, 20,000, 40,000, 70,000, and $100,000cc/m^2{\cdot}day{\cdot}atm$ OTR film treatments for MA storage, and perforated film (conventional storage) was used as the control. The fresh weight loss rate was less than 1% in all OTR film treatments but not in the control. In all OTR film treatments, ethylene content rapidly increased on the first day of storage, and gradually decreased thereafter to $2.0{\mu}L{\cdot}L^{-1}$ by the final storage day. In the 10,000 cc and 20,000 cc OTR film treatments, carbon dioxide content was maintained within the permissible range for asparagus spears under recommended controlled atmosphere (CA) and MA conditions (5-12%). The oxygen content was maintained between 12% and 20% in all OTR film treatments. Hue angles and total chlorophyll content were highest in the 10,000 cc OTR film treatment in both tips and stems. Visual quality was maintained at a saleable level only in the 10,000 cc OTR film treatment until the final storage day (25 days). Based on sensory evaluation, the least off-odor was detected in the 10,000 cc OTR film treatment, and the most in the control treatment. While the soluble solids content decreased with all film treatments, it was maintained at the highest level in the 10,000 cc OTR film treatment. Vitamin C content decreased with all film treatments during storage, but was maintained at higher levels in the 10,000, 20,000, and 40,000 cc OTR film treatments. The firmness of tips and stems increased with storage duration in all film treatments, stems were firmer under the perforated film, 10,000, and 20,000 cc OTR film treatments. Given these results, the 10,000 cc OTR film treatment is considered the most appropriate for MA asparagus spear storage since visual quality and soluble solids content were maintained, and fresh weight loss, vitamin C content, off-odor, and yellowing were suppressed during storage.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.943-951
• /
• 2004

As storing ginger roots under optimum conditions takes high cost, ginger roots are commonly stored in underground tunnels where the maintenance of optimum temperature and humidity is difficult. One of the methods fur long term storage of ginger roots is freezing. The objective of this research was to evaluate effect of storage temperatures and packaging methods on the quality of minced ginger prepared with frozen stored ginger. The minced ginger prepared with frozen stored ginger at $-20^{\circ}C$ was packed in bags, glass bottles and tubes, and then stored at 5 and $-20^{\circ}C$ for quality evaluation at 4 and 15 week-intervals. The changes of surface color, total free sugars, free amino acids and volatile compounds were less in the combined treatment samples than in control during storage, regardless of the storage temperature. The tube packing was the best for maintaining quality of minced ginger during storage among tested packaging methods. Sensory results showed that the minced ginger with the combined treatment and packed in tubes could be stored at 5 and $-20^{\circ}C$ for 12 and 45 weeks, respectively, without a significant drop in palatability.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.269-277
• /
• 2009

This paper reports the results of the research on the effects of probiotic yogurt on the microbiological quality, pH, and sensorial characteristics of fresh chicken meat when packed with probiotic yogurt. The chicken meat pieces were packed with yogurt and were stored at $10^{\circ}C$ for 7 days. Samples were taken after 0, 2, 4, and 7 days of storage, and were analyzed for total bacterial count, E. coli, and coliform, and for the chemical parameters, including the pH. In the control group (packed without yogurt), the Pseudomonas species predominated when the spoilage was obvious after 4-day storage at $10^{\circ}C$. The yogurt-mixed chicken meat package was found to have a significantly lower total viable count and significantly fewer coliform bacteria during storage. Furthermore, the yogurt package showed a growth-inhibiting effect on the Salmonella typhimurium, which were inoculated into the chicken meat pieces for the study. The study findings indicate that probiotic yogurt can be used in packing fresh chicken meat to decrease the population of spoilage bacteria therein and to extend its shelf life.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.155-160
• /
• 2011

Purpose: Fibrillar collagens like type I collagen, are the major constituent of the extracellular matrix and structural protein of bone. Also, it can be a scaffold for osteoblast migration. The purpose of this study is to estimate the effects of absorbable atelo-collagen sponge (Teruplug$^{(R)}$, Terumo biomaterials Co., Tokyo, Japan) insertion in tooth extraction sites on periodontal healing of the second molar, healing of the fractured mandibular bone and new bone formation of third molar socket after the extraction of the impacted third molar with mandibular angle fracture. Methods: In our study of six cases of mandibular angle fractures, all of them underwent the extraction of the third molar tooth & absorbable atelo-collagen sponge insertion in tooth extraction site. Three of them had a intraoral infection & oral opening to fracture site, two of the six had dental caries, and only one had reduction problem due to third molar position. Six consecutive patients with noncomminuted fractures of the mandibular angle were treated by open reduction and internal fixation using one noncompression miniplates and screws placed through a transoral incision. Results: All of the patients have showed good postoperative functions and have not experienced complications requiring second surgical intervention. There was well healing of the mandibular bone and the most new bone formation of third molar socket after the extraction of the impacted third molar with mandibular angle fracture. Conclusion: The results of this study suggest that absorbable atelo-collagen sponge is relatively favorable bone void filler with prevention of tissue collapse, food packing, and enhance periodontal healing. Thus, the use of atelo-collagen sponge and one noncompression miniplate seems to be relatively easy, safe, and effective for the treatment of fractures of the mandibular angle and third molar extraction.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2006.11a
• /
• pp.65-74
• /
• 2006

Modem drug discovery requires rapid pharmacokinetic evaluation of chemically diverse compounds for early candidate selection. This demands the development of analytical methods that offer high-throughput of samples. Naturally, liquid chromatography / tandem mass spectrometry (LC-MS/MS) is choice of the analytical method because of its superior sensitivity and selectivity. As a result of the short analysis time(typically 3-5min) by LC-MS/MS, sample preparation has become the rate- determining step in the whole analytical cycle. Consequently tremendous efforts are being made to speed up and automate this step. In a typical automated 96-well SPE(solid-phase extraction) procedure, plasma samples are transferred to the 96-well SPE plate, internal standard and aqueous buffer solutions are added and then vacuum is applied using the robotic liquid handling system. It takes only 20-90 min to process 96 samples by automated SPE and the analyst is physically occupied for only approximately 10 min. Recently, the ultra-high flow rate liquid chromatography (turbulent-flow chromatography)has sparked a huge interest for rapid and direct quantitation of drugs in plasma. There is no sample preparation except for sample aliquotting, internal standard addition and centrifugation. This type of analysis is achieved by using a small diameter column with a large particle size(30-5O ${\mu}$m) and a high flow rate, typically between 3-5 ml/min. Silica-based monolithic HPLC columns contain a novel chromatographic support in which the traditional particulate packing has been replaced with a single, continuous network (monolith) of pcrous silica. The main advantage of such a network is decreased backpressure due to macropores (2 ${\mu}$m) throughout the network. This allows high flow rates, and hence fast analyses that are unattainable with traditional particulate columns. The reduction of particle diameter in HPLC results in increased column efficiency. use of small particles (<2 urn), however, requires p.essu.es beyond the traditional 6,000 psi of conventional pumping devices. Instrumental development in recent years has resulted in pumping devices capable of handling the requirements of columns packed with small particles. The staggered parallel HPLC system consists of four fully independent binary HPLC pumps, a modified auto sampler, and a series of switching and selector valves all controlled by a single computer program. The system improves sample throughput without sacrificing chromatographic separation or data quality. Sample throughput can be increased nearly four-fold without requiring significant changes in current analytical procedures. The process of Bioanalytical Method Validation is required by the FDA to assess and verify the performance of a chronlatographic method prior to its application in sample analysis. The validation should address the selectivity, linearity, accuracy, precision and stability of the method. This presentation will provide all overview of the work required to accomplish a full validation and show how a chromatographic method is suitable for toxirokinetic sample analysis. A liquid chromatography/tandem mass spectrometry (LC-MS/MS) method developed to quantitate drug levels in dog plasma will be used as an example of tile process.

• Journal of Wetlands Research
• /
• v.20 no.2
• /
• pp.145-154
• /
• 2018

In this study, three pilot-scale wetland systems were built for treating stormwater runoff from asphalt road. Each of the system consists of a settling tank and a vertical flow wetland packed with 25%, 50%, and 75% woodchip as treatment media. According to the analysis of the distributions of particle size, it was found that solids ranging in size $0.52-30{\mu}m$ were predominant in the stormwater runoff. After 24-hours settling, those coarser than $20{\mu}m$ were significantly detained. Further retention, especially for the finer-sized fraction, occurred in the wetland through internal recirculation during the dry day periods. As a primary media of the wetland, woodchip showed a high filtration and attachment capacity for the particulates in pre-settled stormwater, whereas overall amount of solids in the wetland effluent increased due to the detachment of woody elements from the media. This was observed mainly during the initial 75 days of operation, and the size and detachment rate were found to be strongly related with the woodchip packing ratio. The mechanism involving woody particle detachment was modeled as a first-order form. In addition, water quality factors and operational parameters affecting the detachment were analyzed and discussed.

• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.292-296
• /
• 2013

Recently, Pleurotus eryngii, King oyster mushroom is the main export item in South Korea mushroom industry. For appropriate transportation to Europe and USA markets, it is necessary to elucidate suitable conditions of storage and treatment of post-harvest during long time shipping. Whole mushrooms were packed with polypropylene anti-fog film (30 um) without trimming. The range of package weight and oxygen permeability of film were 200 g~400 g and 2000~5000 $cc/m^2$, 24 h,atm, respectively. The weight loss ratio was increased with increasing storage time. There were no big differences in weight loss ratio according to package weight and oxygen permeability of film at low temperature storage($4^{\circ}C$). In case of package weight is 400 g and oxygen permeability of film is 3000 $cc/m^2$, 24 h, atm. As a results of freshness, the optimum packing weight and oxygen permeability of film of P. eryngii were 400 g and below 2,000 $cc/m^2$, 24 h, atm, respectively.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.165-170
• /
• 2008

In this study, the physicochemical, microbial, and sensory properties of law-fat hamburger patties during storage for 25 days at $7{\pm}1^{\circ}C$ were investigated. The law-fat hamburger patties were manufactured by three different packing methods (control: added with 10% lard regular-fat patty, T1: added with 10% lard and organic vegetable of regular-fat patty, T2: added with 3% olive oil of vegetability low-fat patty, T3: added with 3% lard of low-fat patty). The pH of all treated samples increased as the storage time increased, and then decreased after 15 days of storage. The low-fat hamburger patty added with organic olive oil (T2) showed significantly higher pH (p<0.05) compared with other treatments (T1 and T3). The TBARS values of the all treated samples tended to increase after 5 days of storage, and then significant quality loss was observed after 15 days of storage period for the control (T1). However, the samples of the vegitability low-fat patty added organic olive oil had longer shelf-life than the control. The total bacterial counts were 7 log CFU/g after 15 days and 20 days of storage for the control and treatments, respectively. The results of this study showed that the storage period of the treatments was slightly extended compared with the control. Low-fat hamburger patties showed no differences for overall acceptability between control and other patties.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.189-193
• /
• 1998

Binary alloys, $MoRu_3$ and $MoRh_3$, have been prepared using arc melting furnace. Mo and the noble metals Ru and Rh are the constituents of metallic insoluble residues, which were found in the early days of the post-irradiation studies on uranium oxide fuels. Detailed structural informations about these alloys have not been reported on JCPDS files of ICDD (International Centre for Diffraction Data). The results of X-ray diffraction study showed that the alloy was crystallized in hexagonal close-packing, well known as ${\varepsilon}$-phase. The X-ray diffraction patterns of these alloys matched well to that of $WRh_3$ with $P6_3/mmc$ of space group. The lattice parameters, a and c, were calculated using the least squares extrapolation. It was found from X-ray photoelectron spectroscopic measurements that Mo on the surface of the alloy was oxidized to Mo(6+), which could be removed by sputtering with Ar ions for approximately 15 minutes. The changes in binding energy of Mo, Ru, and Rh on the surface of the alloy were not observed. Magnetic susceptibility measurements resulted in the typical Pauli-paramagnetic behavior in the temperature range of 2 to 300 K.